• 제목/요약/키워드: unit module

검색결과 831건 처리시간 0.027초

스마트러닝 기반 과학수업에 대한 중학생들의 인식과 학습만족도 분석 (An Analysis of Middle School Students' Perceptions and Learning Satisfaction in SMART Learning-based Science Instruction)

  • 박수경
    • 한국지구과학회지
    • /
    • 제34권7호
    • /
    • pp.727-737
    • /
    • 2013
  • 본 연구의 목적은 중학교 과학수업을 위한 스마트러닝 기반의 수업 모듈을 개발 적용하고 학생들의 인식과 만족도를 밝히고자 하는 것이다. 이를 위하여 중학교 2학년 천문단원의 태양계 행성과 달의 위상을 주제로 3가지 유형의 모듈을 개발하였고, 중학생 207명을 대상으로 수업을 실시하였다. 수업에 참여한 모든 학생들에게 태블릿PC를 제공하였고, 천문교육용 앱 Solar Walk, 미러링 기능, QR코드, 구글 프리젠테이션 등을 활용하여 학교와 가정에서 학습이 이루어졌다. 본 연구에서 개발한 인식조사 도구는 스마트러닝 수업에 있어서 자기주도적 학습(Self-directed), 학습동기유발(Motivation), 학습자 맞춤형(Adaptiveness), 정보기술활용(Technology Embedded)의 4가지 요인으로 이루어져 있으며, 리커트 5척도의 총 20문항으로 구성되어 있다. 학습만족도 검사도구는 Keller (1987)의 만족도 영역의 검사 항목을 번안 및 수정하여 사용하였다. 스마트러닝 기반의 과학수업에 대한 인식과 학습 만족도를 밝히기 위하여 연구대상 학생들의 성별과 과학성취도 수준별로 비교 분석하였다. 그 결과, 스마트러닝 기반의 수업에 대하여 남학생이 여학생보다 긍정적으로 인식하는 것으로 나타났으며, 과학성취도가 높은 집단이 자기주도학습 요인과 학습동기유발 요인에서 성취도가 낮은 집단보다 긍정적으로 인식하였다. 또한, 학습 만족도 측면에서는 남학생이 여학생보다 만족도가 높게 나타났고, 학업능력이 높은 학생들일수록 스마트러닝 기반의 과학수업에 대하여 만족하고 있는 것으로 조사되었다. 본 연구의 결과는 향후 과학 분야 스마트러닝 활성화를 위한 방향 설정과 실질적인 프로그램 개발에 시사점을 제공할 것이다.

사양관리를 위한 젖소 목장 시설 통합 네트웍 시스템 (Integrated Network System of Milk Cow Stock-Farming Facilities for Stockbreeding Management)

  • 김지홍;이수영;김용준;한병성;김동원
    • 한국축산시설환경학회지
    • /
    • 제8권3호
    • /
    • pp.199-208
    • /
    • 2002
  • 본 연구에서는 실험을 통해 PLC와 하부장치들 사이에 RS -485 직렬 통신방식의 네트웍을 이용한 정보 교환에 있어 잡음 손실이나 왜곡현상이 매우 낮다는 것을 보였다. 제시한 네트웍 방법과 알고리즘에 의해 동작하는 PLC의 효율과 작업 능력을 기반으로 작업장을 분화하여 필요한 작업을 배치한 방법은 매우 효과적이고 편리하며 유용한 정보를 제공하였다. 보다 정확한 정보의 축척과 높은 효율을 위해 본 실험에서 제시한 알고리즘과 운용방법을 각 목장에 활용할 때에는 사용자나 관리자의 요구에 따라 데이터를 통한 계측장비의 교정과 함께 수정이 필요하겠다. 하지만 무엇보다 PLC를 이용한 축산자동화를 통해 사양관리에 필요한 생체 계측 정보를 착유와 동시에 자동으로 다량 획득하여 데이터 전자 문서파일로 보관함으로서, 긴 시간의 지연 없이 사양관리 감독자에게 제공할 수 있는 방법적 해결에 유용성과 신속성을 보였고 사용자나 관리자가 필요한 작업을 수행할 때에 매일 반복적인 작업에 대한 보조적 역할을 하거나 착유 시설과 급이 시설에 완전한 자동화 무인화를 위한 보조적 장비로서 필요한 시설과 정보를 제공하는 것이 가능함을 확인하였다.

  • PDF

ATM-PON에서 MAC을 위한 승인분배 알고리즘의 FPGA 구현 (FPGA Implementation of a Grant Distribution Algorithm for the MAC in the ATM-PON)

  • 김태민;정해;신건순;김진희
    • 대한전자공학회논문지TC
    • /
    • 제38권10호
    • /
    • pp.1-9
    • /
    • 2001
  • ATM-PON(Passive Optical Network)에서 OLT(Optical Line Termination)가 ONU(Optical Network Unit)에게 동적으로 대역폭을 할당하기 위하여 MAC(Medium Access Control) 프로토콜이 필요하다. 이를 통하여 OLT는 ONU의 정보를 수집하고 각 ONU에게 효율적으로 승인을 제공한다. MAC 프로토콜의 두 가지 중요한 기능은 승인 요청 절차와 승인 분배 알고리즘이다. 후자는 TC(Transmission Convergence) 기능모듈에서 연산 량이 가장 많은 부분이며, 칩 면적에서 비교적 큰 부분을 차지하고, 전체 동작 속도를 제한하는 요소가 되기도 하며, 각 트래픽에 대한 서비스 품질을 보장할 수 있도록 설계되어야 한다. 본 논문에서는 MAC을 FPGA를 이용하여 구현하며, 이것은 활동중인 ONU의 수와 큐 길이 정보에 따라 동적으로 대역폭을 할당하며, 각 ONU의 셀 지연변이를 최소화하기 위하여 승인을 등 간격으로 배분한다. 동적인 대역할당을 위하여 MAC 스케쥴러의 구조는 프로그램 가능한 look-up 테이블을 가지고 있다. 또한 이 구조는 단순하면서도 적은 칩 면적과 적은 지연시간을 가지고 있다.

  • PDF

해상 VoIP 서비스를 위한 통합 커뮤니케이션 기술 개발 (Development of unified communication for marine VoIP service)

  • 강남선;임근완;이성행;김상용
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권7호
    • /
    • pp.744-753
    • /
    • 2015
  • 본 논문에서는 해사위성기반의 VoIP 서비스를 위한 해상용 통합 커뮤니케이션 기술 개발에 관한 연구를 수행하였다. 최근 스마트폰과 모바일기기가 대중화되면서 해상에서도 인터넷기반 유무선 통합기술의 수요가 증가하고 있으며, 특히 가격 경쟁력이 높고 다양한 서비스를 제공할 수 있는 VoIP 제품과 서비스 모델에 대한 관심이 높아지고 있다. 따라서 본 논문에서는 첫째, 아날로그 게이트웨이 모듈을 장착하여 기존 선박용 장비와 연동이 가능하며 육상용 시스템 대비 80%이상 소형화 된 해상 VoIP 모듈을 개발하고 둘째, 해상용 VoIP 서비스 핵심요소기술인 통신 데이터 사용량 최소화 기술이 적용된 해상위성통신용 텍스트/음성/영상 엔진을 개발한다. 마지막으로 다자간 메시지 및 클라우드 방식의 메시지 대화지원, 전화번호 기반의 통화기능 지원과 개인 공간에서 육상과 음성 및 영상통화 지원이 가능한 해상용 통합 커뮤니케이션을 설계하고 단위 모듈을 개발하여 성능을 검증하였다.

Exploitation of the Dose/Time-Response Relationship for a New Measure of DNA Repari in the Single-Cell Gel Electrophoresis (Comet) Assay

  • Kim, Byung-Soo;Edler, Lutz;Park, Jin-Joo;Fournier, Dietrich Von;Haase, Wulf;Sautter-Bihl, Mare-Luise;Hagmuller, Egbert;Gotzes, Florian;Thielmann, Heinz Walter
    • Toxicological Research
    • /
    • 제20권2호
    • /
    • pp.89-100
    • /
    • 2004
  • The comet assay (also called the single-cell gel electrophoresis assay) has been widely used for detecting DNA damage and repair in individual cells. Since the conventional methods of evaluating comet assay data using frequency statistics are unsatisfactory we developed a new quantitative measure of DNA damage/repair that is based on all information residing in the dose/time-response curves of a comet experiment. Blood samples were taken from 25 breast cancer patients before undergoing radiotherapy. The comet assay was performed under alkaline conditions using isolated lymphocytes. Tail DNA, tail length, tail moment and tail inertia of the comet were measured for each patient at four doses of $\gamma$-rays (0, 2, 4 and 8 Gy) and at four time points after irradiation (0, 10, 20 and 30 min) using 100 cells each. The resulting three-dimensional dose-time response surface was modeled by multiple regression, and the second derivative, termed 2D, on dose and time was determined. A software module was programmed in SAS/AF to compute 2D values. We applied the new method successfully to data obtained from cancer patients to be assessed for their radiation sensitivity. We computed the 2D values for the four damage measures, i.e., tail moment, tail length, tail DNA and tail inertia, and examined the pairwise correlation coefficients of 2D both on the log scale and the unlogged scale. 2D values based on tail moment and tail DNA showed a high correlation and, therefore, these two damage measures can be used interchangeably as far as DNA repair is concerned. 2D values based on tail inertia have a correlation profile different from the other 2D values which may reflect different facets of DNA damage/repair. Using the dose-time response surface, other statistical models, e.g., the proportional hazards model, become applicable for data analysis. The 2D approach can be applied to all DNA repair measures, Le., tail moment, tail length, tail DNA and tail inertia, and appears to be superior to conventional evaluation methods as it integrates all data of the dose/time-response curves of a comet assay.

소양강댐 유역의 유출 자동보정을 위한 SWAT-CUP의 적용 및 평가 (Application of SWAT-CUP for Streamflow Auto-calibration at Soyang-gang Dam Watershed)

  • 류지철;강현우;최재완;공동수;금동혁;장춘화;임경재
    • 한국물환경학회지
    • /
    • 제28권3호
    • /
    • pp.347-358
    • /
    • 2012
  • The SWAT (Soil and Water Assessment Tool) should be calibrated and validated with observed data to secure accuracy of model prediction. Recently, the SWAT-CUP (Calibration and Uncertainty Program for SWAT) software, which can calibrate SWAT using various algorithms, were developed to help SWAT users calibrate model efficiently. In this study, three algorithms (GLUE: Generalized Likelihood Uncertainty Estimation, PARASOL: Parameter solution, SUFI-2: Sequential Uncertainty Fitting ver. 2) in the SWAT-CUP were applied for the Soyang-gang dam watershed to evaluate these algorithms. Simulated total streamflow and 0~75% percentile streamflow were compared with observed data, respectively. The NSE (Nash-Sutcliffe Efficiency) and $R^2$ (Coefficient of Determination) values were the same from three algorithms but the P-factor for confidence of calibration ranged from 0.27 to 0.81 . the PARASOL shows the lowest p-factor (0.27), SUFI-2 gives the greatest P-factor (0.81) among these three algorithms. Based on calibration results, the SUFI-2 was found to be suitable for calibration in Soyang-gang dam watershed. Although the NSE and $R^2$ values were satisfactory for total streamflow estimation, the SWAT simulated values for low flow regime were not satisfactory (negative NSE values) in this study. This is because of limitations in semi-distributed SWAT modeling structure, which cannot simulated effects of spatial locations of HRUs (Hydrologic Response Unit) within subwatersheds in SWAT. To solve this problem, a module capable of simulating groundwater/baseflow should be developed and added to the SWAT system. With this enhancement in SWAT/SWAT-CUP, the SWAT estimated streamflow values could be used in determining standard flow rate in TMDLs (Total Maximum Daily Load) application at a watershed.

Detection of Precise Crop Locations under Vinyl Mulch using Non-integral Moving Average Applied to Thermal Distribution

  • Cho, Yongjin;Yun, Yeji;Lee, Kyou-Seung;Lee, Dong-Hoon
    • Journal of Biosystems Engineering
    • /
    • 제42권2호
    • /
    • pp.117-125
    • /
    • 2017
  • Purpose: Damage to pulse crops by wild birds is a serious problem. The damage is to such an extent that the rate of damage during the period between seeding and cotyledon stages reaches 54.6% on an average. In this study, a crop-position detection method was developed wherein infrared (IR) sensors were used to determine the cotyledon position under a vinyl mulch. Methods: IR sensors that helped measure the temperature were used to locate the cotyledons below the vinyl mulch. A single IR sensor module was installed at three locations of the crops (peanut, red lettuce, and crown daisy) in the cotyledon stage. The representative thermal response of a $16{\times}4$ pixel area was detected using this sensor in the case where the distance from the target was 25 cm. A spatial image was applied to the two-dimensional temperature distribution using a non-integral moving-average method. The collected data were first processed by taking the moving average via interpolation to determine the frame where the variance was the lowest for a resolution unit of 1.02 cm. Results: The temperature distribution was plotted corresponding to a distance of 10 cm between the crops. A clear leaf pattern of the crop was visually confirmed. However, the temperature distribution after the normalization was unclear. The image conversion and frequency-conversion graphs were obtained based on the moving average by averaging the points corresponding to a frequency of 40 Hz for 8 pixels. The most optimized resolutions at locations 1, 2, and 3 were found on 3.4, 4.1, and 5.6 Pixels, respectively. Conclusions: In this study, to solve the problem of damage caused by birds to crops in the cotyledon stage after seeding, the vinyl mulch is punched after seeding. The crops in the cotyledon stage could be accurately located using the proposed method. By conducting the experiments using the single IR sensor and a sliding mechanical device with the help of a non-integral interpolation method, the crops in the cotyledon stage could be precisely located.

무선 가속도센서 시스템을 이용한 건축물의 실시간 피드백 진동제어 - 시스템 구축 및 기초성능 평가 - (Real-time Feedback Vibration Control of Structures Using Wireless Acceleration Sensor System - System Design and Basic Performance Evaluation -)

  • 전준용;박기태;이진옥;허광희;이우상
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권2호
    • /
    • pp.21-32
    • /
    • 2013
  • 본 논문에서는 건축물의 실시간 피드백 진동제어를 위한 기초연구로써, 자체 기술력을 바탕으로 개발된 무선 가속도센서 시스템 및 프로토타입 (Prototype) AMD 시스템을 결합하여 피드백 진동제어 시스템을 구성하고, 모형 건축물을 대상으로 구성된 제어시스템의 기초성능을 평가하고자 하였다. 이를 위하여 본 논문에서는 우선 MEMS 센서 소자 및 블루투스 통신 모듈 기반의 무선 가속도 센서 유닛, 실시간 가속도 응답획득 및 제어법칙에 근거한 제어출력을 구현하도록 구성한 운영프로그램 등을 개발하였다. 또한 AC 서보모터를 이용해 기동되도록 설계한 프로토타입 AMD 및 모터 드라이버 시스템을 구성하였다. 마지막으로 이를 이용해 실시간 피드백 진동제어 시스템을 구성하였고, 2층 모형 건축물을 대상으로 실험실 규모의 진동제어 실험을 수행하여 목적된 구조물의 진동저감 효과를 정량적으로 분석하였다. 실험의 결과, 모형 구조물의 1차 및 2차 공진주파수 그리고 랜덤주파수 등의 실험조건에서 명확한 진동저감의 효과를 확인할 수 있었으며, 종국적으로 본 논문에서 개발한 무선 가속도센서 시스템 및 AMD 시스템이 향후 여타 구조물의 진동제어를 위한 효과적인 수단으로 응용될 수 있는 가능성을 확인하였다.

GIS 기반의 유역물수지 분석모형 개발 (Development of a GIS-Based Basin Water Balance Analysis Model)

  • 황의호;김계현;박진혁;이근상
    • 한국지리정보학회지
    • /
    • 제7권4호
    • /
    • pp.34-45
    • /
    • 2004
  • 기존 새만금유역의 물수지분석은 유역전체를 단일유역으로 단순화하여 가지야마식으로 산출한 유출량을 기초로 행해졌으나, 새만금유역은 용수공급체계가 복잡 다양하고 향후 임의의 지점에서 물수지요소가 변경될 때 탄력적으로 적용하기에 어려움이 있다. 본 연구에서는 새만금유역에 적합한 물수지분석모형 적용을 위하여 수개의 물수지 단위소유역으로 구분하고 각각의 소유역별 수자원의 개발과 이용에 대해 물수지를 상세분석할 수 있는 GIS 기반의 유역물수지모형을 개발하였다. 유역의 물수지 상세 분석을 위하여 UML 다이어그램을 이용한 물수지모형의 추상 및 개념 설계, 용수공급체계 반영을 위한 하천망 구성, GIS 기반의 전처리 및 후처리 모듈 개발, 모형 보정 및 검증 등을 포함하는 연구를 수행하였다. 이러한 물수지분석모형은 수자원의 유출과정 해석을 통해 유역내 효율적인 수자원관리 방안을 수립할 수 있도록 지원이 가능하며, 사용자로 하여금 유역의 체계적인 수자원관리에 있어 수작업을 최소화하고 다원화된 모델 분석체계를 지원함으로써 보다 편리하고, 합리적인 수자원관리방안 수립에 지원이 가능할 것으로 사료된다.

  • PDF

IGRINS First Light Instrumental Performance

  • Park, Chan;Yuk, In-Soo;Chun, Moo-Young;Pak, Soojong;Kim, Kang-Min;Pavel, Michael;Lee, Hanshin;Oh, Heeyoung;Jeong, Ueejeong;Sim, Chae Kyung;Lee, Hye-In;Le, Huynh Anh Nguyen;Strubhar, Joseph;Gully-Santiago, Michael;Oh, Jae Sok;Cha, Sang-Mok;Moon, Bongkon;Park, Kwijong;Brooks, Cynthia;Ko, Kyeongyeon;Han, Jeong-Yeol;Nah, Jakyuong;Hill, Peter C.;Lee, Sungho;Barnes, Stuart;Park, Byeong-Gon;T., Daniel
    • 천문학회보
    • /
    • 제39권1호
    • /
    • pp.52.2-52.2
    • /
    • 2014
  • The Immersion Grating Infrared Spectrometer (IGRINS) is an unprecedentedly minimized infrared cross-dispersed echelle spectrograph with a high-resolution and high-sensitivity optical performance. A silicon immersion grating features the instrument for the first time in this field. IGRINS will cover the entire portion of the wavelength range between 1.45 and $2.45{\mu}m$ accessible from the ground in a single exposure with spectral resolution of 40,000. Individual volume phase holographic (VPH) gratings serve as cross-dispersing elements for separate spectrograph arms covering the H and K bands. On the 2.7m Harlan J. Smith telescope at the McDonald Observatory, the slit size is $1^{\prime\prime}{\times}15^{\prime\prime}$. IGRINS has a $0.27^{\prime\prime}$ pixel-1 plate scale on a $2048{\times}2048$ pixel Teledyne Scientific & Imaging HAWAII-2RG detector with SIDECAR ASIC cryogenic controller. The instrument includes four subsystems; a calibration unit, an input relay optics module, a slit-viewing camera, and nearly identical H and K spectrograph modules. The use of a silicon immersion grating and a compact white pupil design allows the spectrograph collimated beam size to be 25mm, which permits the entire cryogenic system to be contained in a moderately sized rectangular vacuum chamber. The fabrication and assembly of the optical and mechanical hardware components were completed in 2013. In this presentation, we describe the major design characteristics of the instrument and the early performance estimated from the first light commissioning at the McDonald Observatory.

  • PDF