• Journal of the Korean Solar Energy Society
• /
• v.25 no.1
• /
• pp.45-55
• /
• 2005

In the summer, the irradiated solar heat gain through the roof has an effect on the thermal environment of the top floor units of apartment houses. This paper investigated the differences of the indoor air temperature, globe temperature and thermal comfort index between the top floor unit and the middle floor unit by measuring them at the sample units on the condition that all the openings of the units are opened. The purpose of this paper is to provide quantitative data about the irradiated solar heat gain during the summertime through the roof of an apartment house and these data to be the source to reevaluate the appropriate roof insulation efficiency. From this study, we obtained three brief results as follows. Indoor air temperature difference between the two sample units shifts a day. Indoor air temperature at the top floor unit is $0{\sim}1.8^{\circ}C$ higher than that of the middle floor unit from 12:00 p.m. to 12:00 a.m. and $0{\sim}2.8^{\circ}C$ lower from 12:00 a.m. to 12:00 p.m. The evaluation of the indoor thermal comfort index and the globe temperature shows similar results as the indoor air temperature measuring. Results of this experiment verified the actual existence of indoor air temperature difference between the top floor unit and the middle one and this difference comes from the heat storage of the roof.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.47-54
• /
• 2002

A barrel cam is used as a very important part of an index drive unit. The index drive unit must have an intermittent-rotational motion. The barrel typed cam and roller gear mechanism has the advantages of high reliability to perform a prescribed motion of a follower. This paper proposes a new method for the shape design of the barrel cam and also a CAD program is developed by using the proposed method. As defined in this paper, the relative velocity method for the shape design calculates the relative velocity of the follower versus cam at a center of roller, and then determines a contact point by using the geometric relationships and the kinematic constraints, where the direction of the relative velocity must be parallel to a common tangential line at the contact point of two independent bodies, i.e. the cam and the follower Then, the shape of the cam is defined by the coordinate transformation of the trace of the contact points. This paper presents two examples for the shape design of the barrel cam in order to prove the accuracy of the proposed methods.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.1
• /
• pp.191-206
• /
• 2017

The purpose of this study is to compare the characteristics of research collaborations in the field of LIS. While there are several studies under the unit of analysis of country, there are only a few studies under the unit of analysis of institution in LIS field. For this analysis, we selected eight journals in the KCI (Korea Citation Index) web site, which correspond to the field of LIS through subject classification. The collaborative indices, Collaborative Coefficient, Co-Authorship Index, Local Collaborative Index (LCI), Domestic Collaborative Index (DCI) allowed us to comparatively analyze institutional collaboration patterns in LIS field. In the case of Chung-Ang University, Yonsei University, and Ewha Womans University, collaborative research among professors, graduate students, and professors reflected the fact that collaborations among universities are often performed with professors. In the case of KISTI, which showed a very high index value, the characteristics of project-based research are reflected in the research collaboration pattern.

• Journal of Fisheries and Marine Sciences Education
• /
• v.22 no.3
• /
• pp.330-340
• /
• 2010

This study was investigated the species composition of demersal fishes by a bottom trawler GAYA, in order to be used basic data for resources management of fishery in the jointly controlled waters of the East China sea. We caught 52 species, 1,167 individuals and 186.171kg in biomass in summer, and 1,924 individuals and 200.871kg in biomass in winter The first dominant species in individuals in summer was Glossanodon semifasciatus, and in biomass was Dentex tumifrons. But that in winter was Ovalipes punctatus in both individuals and biomass. It was a special phenomenon that crustacea was to be the first dominant species compared with general offshore fishery in Korea. Catch per unit effort (kg/hr) of bottom trawl in winter was higher than that in summer. There was also big difference by station in the diversity index, the evenness index and the dominant index.

• The Journal of Society for e-Business Studies
• /
• v.7 no.2
• /
• pp.21-38
• /
• 2002

Document retrieval (DR) has been a serious issue for long in the field of Office Information Management. Nowadays, our daily work is becoming heavily dependent on the usage of information collected from the internet, and the DR methods on the Web has become an important issue which is studied more than any other topic by many researchers. The main purpose of this study is to develop a model to manage business documents by integrating three major methodologies used in the field of electronic library and information retrieval: Metadata, Thesaurus, and Index/Reversed Index. In addition, we have added a new concept of eDocument, which consists of metadata about unit documents and/or unit document themselves. eDocument is introduced as a way to utilize existing document sources. The core concepts and structures of the model were introduced, and the architecture of the eDocument management system has been proposed. Test (simulation) result of the model and the direction for the future studies were also mentioned.

• Air Cleaning Technology
• /
• v.22 no.2
• /
• pp.40-49
• /
• 2009

Aluminum thin plate coated with epoxy resin containing about 20wt% brass powder, was applied to fins of heat exchanger. We carried out a series of detailed examinations to evaluate the anti-bacterial performance of the plate and heat exchanger (fan coil unit). In the presence of water or moisture, copper ions which have an anti-bacterial ability eluted from brass powder and showed sufficient effects on many kinds of bacteria. We also evaluated the anti-bacterial performance quantitatively by use of the index API (Anti-bacterial Performance Index) which has already been proposed by authors.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.107-113
• /
• 2011

LSPR(Localized Surface Plasmon Resonance) sensor measures the refractive index change on the sensor surface. The detection of biological reaction with the unknown refractive index needs to be converted into the signal sensitivity for the refractive index change for comparison with other measurements. To find the signal sensitivity, the three steps of signal processing are proposed, which are signal modeling, signal calibration and signal normalization of LSPR sensor. The detected signal of biotin-streptavidin interaction has been converted into unit of [RU](Resonance Unit) using the proposed method. The converted signal directly can be compared with the other sensors including commercialized one.

• Journal of Digestive Cancer Research
• /
• v.10 no.2
• /
• pp.99-106
• /
• 2022

Clinical research ultimately aimed to promptly diagnose and prevent diseases through precise biomarker development. Finding the optimal cut-off point of a regularly measured biomarker can help its interpretation and ultimately help in disease investigation and diagnosis, more specifically in determining the presence of diseases. Therefore, this study aimed to use the characteristics of outcome variables in clinical research to explain how to determine the optimal cutoff point. The outcome variables can be divided into dichotomous, ordinal, and survival types. The optimal cut-off point can be determined by finding points that maximize the Youden index, extended Youden index, and log-rank statistics. This study will enable clinical researchers to accurately determine the optimal cut-off points for regularly measured biomarkers, thereby enabling prompt disease diagnosis for effective treatment.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1075-1080
• /
• 2011

Among the numerous topological indices considered in chemical graph theory, only a few have been found noteworthy in practical application, Randi$\acute{c}$ index is one of them. The dendrimer nanostars is a synthesized molecule built up from branched unit called monomers. In this article, we compute the Randi$\acute{c}$ index of two types of polymer dendrimers and a fullerene dendrimer.

• The Korean Nurse
• /
• v.32 no.5
• /
• pp.66-77
• /
• 1994

The purpose of this study was to develop a new nursing unit which can meet changing health care needs, enhance patients' satisfaction and nurses' job satisfaction, and finally guarantee quality nursing care with present manpower. For this, one medical unit was selected as a unit for quality care. And one medical unit which is similar in staffing and patients' characteristics was selected as a control unit. To assess present problems and identify the remedies to the problems a hospital-wide survey and a workshop were performed. According to the survey results, educational programs and improvement of the facilities and equipment supply system, managereal support for interdepartmental cooperation and intensification of bed-side nursing care were adopted as main principles for operating model unit, This model unit was operated for 3 months from Sep. 1, 1992 to Nov. 30, 1992. To evaluate the effectiveness of the model unit, derect/indirect nursing care hours, patients' satisfaction to nursing care, nurses' job satisfaction, and quality care index were measured. Direct/indirect nursing care hours were compared with that of the control unit, and patients' and nurses' satisfaction and quality care index were measured before and after operating model unit and compared with each other. The results of the study were as follows; 1. In the model unit mean direct nursing care hours per cach shift was 146.88 minutes and indirect nursing care hours was 354.72 minutes. The ratio of the direct nursing care hour to indirect nursing hour was 29.6 ; 70.4 and that of the control unit was 26.9 : 73.1. Direct nursing care hour in model unit was longer than that of the control unit. But, the difference was not significant. In subcategories of direct nursing care, the time spent in mobility and exercise, conservation of body temperature, hygiene, and communication and health education were longer than that of the con" trol unit. 2. Indirect nursing care hour in model unit was shorter than that of the control unit. But, the difference was not significant. In subcategories of indirect nursing care, the time spent in drug management and ward arrangement was shorter than that of the control unit. 3. Patients' satisfaction to nursing care was increased significantly after operating the model unit (T=-3.48, P=-0.002) and satisfaction to subcategories of physical comfort measure, psychological cate, and unit management components were significantly higher than before. 4. In the model unit, nurses' total job satisfaction was increased significantly after operating the model unit(Z=2.1004, P=.0357) and satisfaction to subcategory of satisfaction to administration was significantly higher than before (Z=-2.0732, P=.0382). 5. After operating the model unit, quality care index was increased from 89 to 93. With this results, it can be summarized that all the measures tried for quality care, such as educational programs, managereal support for interdepartmental cooperation, and improvement of the equipment and facility provision resulted in partial increase in direct nursing care hours, nurses satisfaction to their job and patients' satisfaction to nursing care. In can be postulated that managereal support and motivation without proper staff supplementation is not enough for increasing direct nursing care hours. And for the enhancement of the level in clinical nursing, and staff supplement must be considered sincerely and the measures for reducing indirect nursing care hours, such as computerization of nursing care activities, improvement of facilities and equipment and facilities supply system, must be instituted in addition.