• Archives of Pharmacal Research
• /
• 제4권1호
• /
• pp.33-41
• /
• 1981

The prepared dextran sulfates were characterized by measuring the reduced viscosisty at five different concentrations to obtain an intrinsic viscosity in both phosphate and tris buffers, pH 7.4, ionic strength of 0.1 Dextran sulfates having 0.81, 1.06 sulfate groups per hexose unit have reduced viscosity value below 40 ml/g whereas dextran sulfates having 1.21, 1.43, 1.69 sulfate groups per hexose unit have reduced viscosity value over 40 ml/g. Dextran sulfate having 1.21 sulfate groups per hexose unit had highest value of reduced viscosity. The reduced viscosity of dextran sulfate in tris buffer was always higher than that in phosphate buffer regardless of the sulfate content of dextran sulfate. The influence of the sulfation of the dextran sulfate. The influence of the sulfation of the dextran sulfate molecule on the dextran sulfate-LDL interaction was studied with three different dextran sulfate molecules. Dextran sulfate molecules having more than one sulfate group per hexose unit. The dextran sulfate having 0.81 sulfate groups per hexose unit showed considerably different precipitation curves in phosphate and tris buffers. This peculiar behavior of dextran sulfate having 0.81 sulfate groups per hexose unit in the two buffer systems was not noticed with dextran sulfate having more than one noticed with dextran sulfate having more than one sulfate group per hexose unit.

• 대한치과보철학회지
• /
• 제58권1호
• /
• pp.7-13
• /
• 2020

목적: 본 연구의 목적은 절삭 가공법 및 적층 가공법에 의해 제작된 3본 고정성 국소의치의 변연 및 내면 적합도를 비교하는 것이다. 재료 및 방법: 상악 좌측 제2소구치가 상실된 3본 고정성 국소의치 지대치를 제작하고(주모형), 구강 스캐너를 이용해 주모형 스캔 데이터를 얻었다. 3본 고정성 보철물은 다음과 같은 3가지 방법으로 제작하였다: Milled 3-unit fixed dental prostheses (FDP) (MIL군), digital light processing (DLP) 3D printed 3-unit FDP (D3P군), stereolithography apparatus (SLA) 3D printed 3-unit FDP (S3P군). 보철물의 변연 및 내면 적합도와 내면 정밀도 평가하기 위해 각각 triple-scan protocol과 콤비네이션 수식을 사용하여 스캔 데이터를 중첩하였다. 3차원 분석 프로그램(Geomagic control X)을 사용하여 root mean square (RMS) 값과 color difference map 통해 정량 및 정성 분석 시행하였다. Kruskal-Wallis test (α = .05)와 Mann-Whitney U test 및 Bonferroni correction (α = .05/3 = .017)을 이용하여 통계 분석하였다. 결과: S3P군의 변연 적합도는 MIL군과 D3P군에 비해 우수하였으며, MIL군과 D3P군은 비슷한 수준을 보였다. D3P군과 S3P군은 MIL군에 비해 상대적으로 우수한 내면 적합도를 보였으며, D3P군과 S3P군 사이에는 유의한 차이가 없었다. 한편, MIL군, S3P군, 그리고 D3P군 순으로 우수한 정밀도를 보였다. 결론: 본 연구의 한계 내에서 적층 가공법으로 제작된 3본 고정성 보철물은 절삭 가공법으로 제작된 3본 고정성 보철물에 비해 우수한 변연 및 내면 적합도를 보인 반면 정밀도는 떨어지는 것으로 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제25권3호
• /
• pp.733-740
• /
• 1995

This investigation was undertaken to determine the relationship between the amount of polymorphonuclear leukocyte(PMN) enzyme myeloperoxidase(MPO) in gingival crevicular fluid(GCF) collected from active or control site and gingival disease status described by clinical indices(gingival index, papillary bleeding index, pocket depth, periotron unit). The results were as follows : 1. MPO activity/site was greater at active sites than at control sites. 2. According to increasing the clinical parameters, MPO/sites was higher statistically (P<0. 01, P<0.05). 3. High MPO(unit/site) groups was higher statistically than low MPO(unit/site) groups in various clinical parameters. 4. Correlation coefficients between MPO(unit/site) and GI, MPO($unit/{\mu}l$ GCF) and periotron unit were 0.4782, -0.5901, respectively.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.219-225
• /
• 2013

PURPOSE. Few studies have investigated the marginal accuracy of 3-unit zirconia fixed partial dentures (FPDs) fabricated by computer-aided design/computer-aided manufacturing (CAD/CAM) system. The purpose of this study was to compare the marginal fit of zirconia FPDs made using two CAD/CAM systems with that of metal-ceramic FPDs. MATERIALS AND METHODS. Artificial resin maxillary central and lateral incisors were prepared for 3-unit FPDs and fixed in yellow stone. This model was duplicated to epoxy resin die. On the resin die, 15 three-unit FPDs were fabricated per group (45 in total): Group A, zirconia 3-unit FPDs made with the Everest system; Group B, zirconia 3-unit FPDs made with the Lava system; and Group C, metal-ceramic 3-unit FPDs. They were cemented to resin dies with resin cement. After removal of pontic, each retainer was separated and observed under a microscope (Presize 440C). Marginal gaps of experimental groups were analyzed using one-way ANOVA and Duncan test. RESULTS. Mean marginal gaps of 3-unit FPDs were $60.46{\mu}m$ for the Everest group, $78.71{\mu}m$ for the Lava group, and $81.32{\mu}m$ for the metal-ceramic group. The Everest group demonstrated significantly smaller marginal gap than the Lava and the metal-ceramic groups (P<.05). The marginal gap did not significantly differ between the Lava and the metal-ceramic groups (P>.05). CONCLUSION. The marginal gaps of anterior 3-unit zirconia FPD differed according to CAD/CAM systems, but still fell within clinically acceptable ranges compared with conventional metal-ceramic restoration.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.364-371
• /
• 2016

Objective: With the introduction of third-generation light-emitting diodes (LEDs) in dental practice, it is necessary to compare their bracket-bonding effects, safety, and efficacy with those of the second-generation units. Methods: In this study, 80 extracted human premolars were randomly divided into eight groups of 10 samples each. Metal or polycrystalline ceramic brackets were bonded on the teeth using second- or third-generation LED light-curing units (LCUs), according to the manufacturers' instructions. The shear bond strengths were measured using the universal testing machine, and the adhesive remnant index (ARI) was scored by assessing the residual resin on the surfaces of debonded teeth using a scanning electron microscope. In addition, curing times were also measured. Results: The shear bond strengths in all experimental groups were higher than the acceptable clinical shear bond strengths, regardless of the curing unit used. In both LED LCU groups, all ceramic bracket groups showed significantly higher shear bond strengths than did the metal bracket groups except the plasma emulation group which showed no significant difference. When comparing units within the same bracket type, no differences in shear bond strength were observed between the second- and third-generation unit groups. Additionally, no significant differences were observed among the groups for the ARI. Conclusions: The bracket-bonding effects and ARIs of second- and third-generation LED LCUs showed few differences, and most were without statistical significance; however, the curing time was shorter for the second-generation unit.

• 대한수학회보
• /
• 제58권1호
• /
• pp.225-234
• /
• 2021

Let D be a division ring and n > 1 be an integer. In this paper, it is shown that if D ≠ ��3, then every subpermutable subgroup of the general skew linear group GLn(D) is normal. By applying this result, we show that every subpermutable subgroup of the unit group (ℝG)∗ of the real group algebras RG of finite groups G is normal in (ℝG)∗.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권11호
• /
• pp.4549-4553
• /
• 2014

Background: Infection is a serious cause of mortality in febrile neutropenia of pediatric cancer patients. Recently, monotherapy has replaced the combination therapy in empirical treatment of febrile neutropenia. Since there has been no reported trial comparing the efficacy of meropenem and piperacillin-tazobactam (PIP/TAZ) monotherapies, the present retrospective study was conducted to compare safety and efficacy in febrile neutropenic children with cancer. Materials and Methods: Charts of febrile, neutropenic children hospitalized at our center between March 2008 and April 2011 for hemato-oncological malignancies were reviewed. Patients received PIP/TAZ 360 mg/kg/day or meropenem 60 mg/kg/day intravenously in three divided doses. Duration of fever and neutropenia, absolute neutrophil count, modification, and success rate were compared between the two groups. Resolution of fever without antibiotic change was defined as success and resolution of fever with antibiotic change or death of a patient was defined as failure. Modification was defined as changing the empirical antimicrobial agent during a febrile episode. Results: Two hundred eighty four febrile neutropenic episodes were documented in 136 patients with a median age of 5 years. In 198 episodes meropenem and in 86 episodes PIP/TAZ were used. Duration of fever and neutropenia, neutrophil count, sex, and primary disease were not different between two groups. Success rates and modification rate between two groups showed no significant differences (p>0.05). Overall success rate in the meropenem and PIP/TAZ groups were 92.4% and 91.9% respectively. No serious adverse effects occurred in either of the groups. Conclusions: Meropenem and PIP/TAZ monotherapy are equally safe and effective in the initial treatment of febrile neutropenia in children with cancer.

• 한국콘텐츠학회논문지
• /
• 제13권11호
• /
• pp.800-806
• /
• 2013

본 연구의 목적은 CAD/CAM 시스템을 이용하여 지르코니아 코어를 제작한 다음 span의 길이가 변연 적합도에 미치는 영향과, 변연 간격이 임상적으로 허용 가능한 범위 내에 있는지를 평가하였다. 실험군은 지르코니아 single crown, 2-unit bridge, 3-unit bridge, 4-unit bridge의 4그룹으로 나누고 각 그룹별로 10개씩 코어를 제작하였다. 평균 변연 간격은 single $42.95{\pm}6.93{\mu}m$, 2-unit $43.53{\pm}5.27{\mu}m$, 3-unit $53.43{\pm}13.38{\mu}m$, 4-unit $50.85{\pm}8.25{\mu}m$으로 나타났다. 근심면, 원심면에서는 single, 2-unit 그룹과 3-unit, 4-unit 그룹 간 span의 길이 요인에 따라 통계학적으로 유의한 차이가 있는 것으로 나타났다(p<.05). 협면, 설면에서는 모든 그룹에서 span의 길이 요인에 따라 통계학적으로 유의한 차이가 없었다(p>.05). 이러한 결과는 지르코니아 코어의 span 길이가 변연 적합도에 영향을 주었고, 변연간격은 모든 그룹에서 임상적 허용 범위 내에 존재 하였다.

• 대한치과보철학회지
• /
• 제36권4호
• /
• pp.587-597
• /
• 1998

In this study, the Periotest value was measured with Periotest to evaluate precision fit of the 2-unit and 3-unit implant-supported prosthesis by modifying the size and location of ill-fitted conditions. The 2-unit prosthesis was fabricated with the right implant fitted incorrectly and the 3-unit prosthesis with the right and center implant fitted incorrectly. To evaluate the effects of the ill-fitted sizes, 4 groups were divided.:The control group being the accurately fabricated sample group fitted properly. Group 1 was constructed with $40{\mu}m$ ill-fitted conditions, group 2 with $70{\mu}m$ and group 3 with $100{\mu}m$ ill-fitted conditions. The Periotest value was measured at each implant site after tightening 10Ncm. The result was follows : 1. The PTV on the ill-fitted area in the 2-unit implant-supported prosthesis increased as the ill-fitted conditions increased. There was a statistically significant difference among groups(p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05) 2. The PTV on the ill-fitted area of the 3-unit implant-supported with an ill-fitted condition in the right implant increased as the ill-fitted conditions increased. There was a significant difference among groups (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated a statistically significant difference (p<0.05). 3. In the 3-unit implant-supported prosthesis with ill fitting conditions in the center implant, the PTV on the ill-fitted area demonstrated a statistically significant difference between the control group, group 1 and group 2 (p<0.05). In the same ill-fitted sample, the PTV depending on the measured location demonstrated significant difference between the gap side and the adjacent side with over $70{\mu}m$ ill-fitted conditions (p<0.05). The results suggest that Periotest is a valuable objective method for evaluating the precision fit of an implant superstructure.

• 충청수학회지
• /
• 제19권3호
• /
• pp.291-297
• /
• 2006

We find unit Killing vectors and homogeneous geodesics on the Lie group with Lie algebra $\mathbf{a}{\oplus}_p\mathbf{r}$, where $\mathbf{a}$ and $\mathbf{r}$ are abelian Lie algebra of dimension n and 1, respectively.