• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.590-603
• /
• 2006

Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.

• Journal of the Korean earth science society
• /
• v.38 no.1
• /
• pp.49-63
• /
• 2017

The geochemical results of the Chunyang granites located in the northeastern part of the Yeongnam Massif, indicate that these rocks have characteristics of calc-alkaline series in the sub-alkaline field, I-type and peraluminous. Most of the geochemical features in major and trace elements show systematic trends, which are similar to differentiation trends of the general Jurassic granitoids in South Korea. The Chunyang granite is largely enriched in mobile LILE (Sr, K, Rb and Ba) relatively immobile HFSE. They show LREE enriched patterns [$(La/Lu)_{CN}=41.8-73.2$] with a slightly negative Eu anomaly [$(Eu/Eu^*)_{CN}=0.89-1.10$]. There are no meaningful correlations in major and trace elements between the Chunyang granites and the Buseok plutonic rock which is the main unit of the Yeongju batholith. This result may suggest that these two plutonic rocks be not derived from the same parent magma. Tectonic discrimination diagrams indicate that the Chunyang granite was formed in volcanic arc environments. These geochemical characteristics results suggest that the Chunyang granite must have been generated at the active continental margin during the subduction of the Jurassic proto-Pacific plate.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.4
• /
• pp.97-113
• /
• 2019

This study is focused on the examination of changes in textbooks of Home Economics in High school from 7^st to 2015 curriculum, especially the 'Food and Nutrition section. We investigated the content elements of the National Curriculum Guide, the changes in learning contents, and the number of pages of Food and Nutrition section. The key words were extracted and the connective relationships between words were visualized using a method of language network analysis through word cloud and Semantic Network Analysis. According to the results of the research, the portion of the Food and Nutrition section has been gradually decreased on the Technology·Home Economics, following the development of the curriculum. Through the whole curriculum, 'invitation', 'Korean food', 'baby·nutrition' are appeared as key words. The education contents of Food and Nutrition section from the 7^th to 2015 revised have been developed and advanced with the changes of social needs. However, the reduction of portion and insufficiency of content elements of Food and Nutrition section bring concerns toward the decline of the quality of education on dietary life.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.894-900
• /
• 2004

There are many types of circularly polarized(CP) microstrip antenna elements, which are used as a good unit radiator. Since an advantage of CP antenna is no strict alignment requirements between Rx and Tx system, the printed antennas with circular polarization are very often used in numerous satellite and mobile radio systems. In order to realize the broad bandwidth of 3 dB axial ratio and impedance of CP microstrip antenna, complex feed structure and tri-plate patch element have been researched. This paper describes a design of wideband microstrip cross slot array antennas with circular polarization. The proposed antenna is composed of an open-ended microstrip feed line as a feeder and a cross slot as a radiator for circular polarization. To realize the wide bandwidth, tri-plate structure are considered and cross slot is electromagnetically coupled with feed line. Optimum parameters of 1-element cross slot antenna are analyzed and designed by method of moments. These parameters are also applied to may antennas design considered the mutual coupling between radiating elements. Right hand circular polarization(RHCP) and left hand circular polarization(LHCP) of the proposed antenna are easily controlled by asymmetrical cross slot structure and slot position. In 1-element and 15-element cross slot array antenna, the good axial ratio of 1 dB below and the broad bandwidth characteristics of antenna are obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7617-7628
• /
• 2015

Recent changes in the industrial parks have become a major issue in the nation's economic aspect. However, the industrial park's structure-advance projects under regional changes have excluded the surrounding spaces. The purpose of study is to analyze physical characteristics of Industrial park and adjacent area and to propose practical urban linkage alternatives as place-making It was found that in an urban aspect, the industrial parks belong within the city, but look like an isolated island that doesn't belong to a city. Therefore, as a way that could improve the problems above, and prevent the formation of heterogeneous spaces, the deliberate management of Industrial park's structure-advancement projects is needed. As one of these measures, It is concluded that the review of designating industrial facility zones which is a district unit plan and managing the detailed elements of construction to the various elements of the district level are needed.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.458-467
• /
• 2002

There has been proposed many simplification algorithms for effectively decreasing large-volumed polygonal surface data. These algorithms apply their own cost function for collapse to one of fundamental simplification unit, such as vertex, edge and triangle, and minimize the simplification error occurred in each simplification steps. Most of cost functions adopted in existing works use the error estimation method based on distance optimization. Unfortunately, it is hard to define the local characteristics of surface data using distance factor alone, which is basically scalar component. Therefore, the algorithms cannot preserve the characteristic features in surface areas with high curvature and, consequently, loss the detailed shape of original mesh in high simplification ratio. In this paper, we consider the vector component, such as surface orientation, as one of factors for cost function. The surface orientation is independent upon scalar component, distance value. This means that we can reconsider whether or not to preserve them as the amount of vector component, although they are elements with low scalar values. In addition, we develop a simplification algorithm based on half-edge collapse manner, which use the proposed cost function as the criterion for removing elements. In half-edge collapse, using one of endpoints in the edge represents a new vertex after collapse operation. The approach is memory efficient and effectively applicable to the rendering system requiring real-time transmission of large-volumed surface data.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.103-117
• /
• 2021

With the current rapid changes in population and technology, the long-lastig housing certification system is a means of prolonging the physical and functional lifespan of a building. The certification requires differentiation between the structure and infill elements to allow for variability and ease of repairs. This works well with prefabricated houses so this study investigated the possibility of applying the long-lastig housing certification requirements to apartment construction using off-site construction (OSC) methods focused on the installation of bathrooms (plumbing and toilet) that differ from the traditional wet method. This study examined three different sized floor plans at 22 m², 46 m², and a combined one resulting in 69 m². The larger 69 m² plan utilized a removeable non-load bearing wall to increase flexibility in the layout of the floorplan. The apartments are constructed of steel reinforced concrete composite columns on a 9 m × 10.5 m grid with integrated slabs. The exterior and interior infill walls are all non-load bearing with some containing plumbing. This separation of the structure and infill walls can help meet some of the criteria in the long-lastig housing certification, particularly with the ease of repairs. Technologies that facilitate the replacement of infill elements that contain plumbing and other building services can benefit the nation by reducing carbon emissions and therefore tax incentives should be introduced to increase the adoption of the proposed construction methods.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.40-51
• /
• 2021

The purpose of this study is to diagnose urban spatial structures using spatial modeling techniques for balanced urban development as part of sustainable urban growth management. Since urban spatial structure is an interaction of various activities, it is necessary to interpret the analysis results in conjunction with the analysis of changes in spatial structural elements. In this study, population and transportation were approached for research purposes. Population data were applied to the Getis-Ord G_i^* method, a spatial statistical technique, to analyze the concentration-decreasing region of the population. Traffic data analyzed the trend of centrality change by applying commuting traffic O-D data to Social Network Analysis techniques. The analysis showed that urban imbalance was growing, and the centrality of transportation was changing. The results of the analysis of spatial structure elements could be interpreted by linking the results of each factor to each neighborhood unit, predicting changes in urban spatial structure and suggesting directions for sustainable urban growth management.These results could also be used as a decision-making tool for various urban growth management policies introduced to cope with rapid urban development and uncontrollable development in many cities around the world.

• Trans-
• /
• v.12
• /
• pp.141-171
• /
• 2022

This study was conducted to understand media and cultivate personality by using media as data for personality education. To achieve this purpose, the Personality Education Promotion Act and the Korea Educational Development Institute's personality virtues were selected as educational elements, and a personality education program using media was developed in combination with the middle school curriculum. For this study, first, in order to extract personality virtues, 13 personality virtues were finally selected as educational elements by comparing and synthesizing the personality virtues of the Personality Education Promotion Act and the Korea Education Development Institute. The final personality virtues selected are self-esteem, courage, sincerity, self-regulation, wisdom, consideration, communication, courtesy, social responsibility, cooperation, citizenship, justice, and respect for human rights. Second, in order to select media and set the direction of development of personality education programs, the process of collecting media data was confirmed, and the direction and goal of the program were set by analyzing the middle school curriculum. Third, in order to propose a method of applying a personality education program using media, the personality grafting unit was selected by referring to the commentary on all subjects of the 2015 revised curriculum.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1249-1249
• /
• 2022

The facade, an exterior material of a building, is one of the crucial factors that determine its morphological identity and its functional levels, such as energy performance, earthquake and fire resistance. However, regardless of the type of exterior materials, huge property and human casualties are continuing due to frequent exterior materials dropout accidents. The quality of the building envelope depends on the detailed design and is closely related to the back frames that support the exterior material. Detailed design means the creation of a shop drawing, which is the stage of developing the basic design to a level where construction is possible by specifying the exact necessary details. However, due to chronic problems in the construction industry, such as reducing working hours and the lack of design personnel, detailed design is not being appropriately implemented. Considering these characteristics, it is necessary to develop the detailed design process of exterior materials and works based on the domain-expert knowledge of the construction industry using artificial intelligence (AI). Therefore, this study aims to establish a detailed design automation algorithm for AI-based condition-responsive exterior wall panels and their back frames. The scope of the study is limited to "detailed design" performed based on the working drawings during the exterior work process and "stone panels" among exterior materials. First, working-level data on stone works is collected to analyze the existing detailed design process. After that, design parameters are derived by analyzing factors that affect the design of the building's exterior wall and back frames, such as structure, floor height, wind load, lift limit, and transportation elements. The relational expression between the derived parameters is derived, and it is algorithmized to implement a rule-based AI design. These algorithms can be applied to detailed designs based on 3D BIM to automatically calculate quantity and unit price. The next goal is to derive the iterative elements that occur in the process and implement a robotic process automation (RPA)-based system to link the entire "Detailed design-Quality calculation-Order process." This study is significant because it expands the design automation research, which has been rather limited to basic and implemented design, to the detailed design area at the beginning of the construction execution and increases the productivity by using AI. In addition, it can help fundamentally improve the working environment of the construction industry through the development of direct and applicable technologies to practice.