• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.1
• /
• pp.41-48
• /
• 2010

A house is basic unit of human being living space and it reflects an occupation, family relation, a life style and sense of value of resident. The purpose of this study was to research the continuity of traditional elements and contemporary change of Japanese houses by field study and literature research. The subject of this study was sixteen houses of Miyashiro, Saitama pref. in Japan. The results of this study are as follow as. First, the traditional elements of contemporary Japanese houses are tatami floor room, tsuzukima, zashiki, dokonoma, butsudan, amado. Second, the tatami is symbol of Japanese living space. Wasizus maintains a traditional characteristic, but it is developed and fixed properly change in contemporary life. Third, the traditional elements of Japanese houses are continuing in the modern houses, and they are continuously changed the feature from recreate. It can be a connection of a hereditary factor of residential culture. Four, the continuity of modern change and traditional element of the Japanese houses can be understood the change of the structural and spatial responding method to accommodates a life.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.377-400
• /
• 2022

The aim of this work is a numerical comparison (FEM) between lattice pyramidal-core panel and honeycomb core panel for different core thicknesses. By evaluating the mid-span deflection, the shear rigidity and the shear modulus for both core types and different core thicknesses, it is possible to define which core type has got the best mechanical behaviour for each thickness and the evolution of that behaviour as far as the thickness increases. Since a specific base geometry has been used for the lattice pyramidal core, the comparison gives us the opportunity to investigate the unit cell strut angle giving the higher mechanical properties. The presented work considers a detailed FEM modelling of a standard 3-point bending test (ASTM C393/C393M Standard Practice). Detailed FEM modelling addresses to detailed discretization of cores by means of beam elements for lattice core and shell elements for honeycomb core. Facings, instead, have been modelled by using shell elements for both sandwich panels. On lattice core structure, elements of core and facings are directly connected, to better simulate the additive manufacturing process. Otherwise, an MPC-based constraint between facings and core has been used for honeycomb core structure. Both sandwich panels are entirely built of Aluminium alloy. Prior to compare the two models, the FEM sandwich panel model with lattice pyramidal core needs to be validated with 3-point bending test experimental results, in order to ensure a good reliability of the FEM approach and of the comparison. Furthermore, the analytical validation has been performed according to Allen's theory. The FEM analysis is linear static with an increasing midspan load ranging from 50N up to 500N.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.52-59
• /
• 2008

The objective of this study is to develop an automatic object changer unit to improve processing problems existed in the conventional horizontal machining center. To achieve this goal, this study designed a horizontal transfer as the second project continued to the first project that designed a upward and downward traverse unit. A horizontal traverse unit shows a symmetric structure and consists of frame, which consists of four unit tools, motor and reducer, which are fixed at a frame, operation unit with pinions, first traverse unit, and second traverse unit. Constraint conditions based on the operation mechanism with these elements were configured and obtained following results after modeling a model for a traverse motor. In the kinematic expression of sliding motion with one degree of freedom, the sliding motion is constrained. Also, the rack 3 installed at a frame is used to configure possible kinematic constraint conditions of the rack 2 according to the rolling motion of the pinion 2 in the first traverse unit. In addition, the moment of inertia that is a type of kinetic energy in a converted horizontal traverse unit in the side of the reducer can be applied to introduce the moment of inertia of a converted horizontal traverse unit in the side of the reducer by using the sum of kinetic energy in the rack and pinion, which is a part of the horizontal traverse unit. Also, the equation of motion of the converted upward and downward traverse unit in the side of the motor using the equation of motion of the motor. Furthermore, the horizontal traverse unit predetermines the mass of the first and second traverse unit and applied load including the radius and reduction ratio of the pitch circle in the pinion 1 and applied load to the rack 2. Then, a proper motor can be determined using several parameters in the upward and downward traverse unit in order to verify such predetermined specifications. In future studies later this study, a simulation that verifies the results of the previous two stages of studies using a finite element method.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.390-397
• /
• 2006

The purpose of this study was to evaluate the accuracy and the consistency of four different electronic apex locators in an in vitro model. Fourty extracted premolars were used for the study. Four electronic apex locators (EAL) were Root ZX, Smarpex, Elements Diagnostic Unit (EDU), and E-Magic Finder Deluxe (EMF). After access preparation, the teeth were embedded in an alginate model and the length measurements were carried out at '0.5' and 'Apex' mark using four EALs. The file was cemented at the location of the manufacturers' instruction (Root ZX, EDU, EMF: 0.5 mark, SmarPex: Apex mark). The apical 4mm of the apex was exposed and the distance from the file tip to the major foramen was measured by Image ProPlus (${\times}100$). The distance from the file tip to the major foramen was calculated at 0.5 and Apex mark and the consistency of 0.5 and Apex mark was compared by SD and Quartile of Box plots. In this study, Root ZX and EMF located the apical constriction accurately within ${\pm}0.5 mm$ in 100%, whereas SmarPex and EDU located in 90% and in 70% respectively. For Root ZX and EMF, there was no significant difference between the consistency of 0.5 and Apex mark. However, for the EDU and SmarPex, Apex mark was more consistent than 0.5 mark. From the evaluation of the consistency in this study, for Root ZX and EMF, both 0.5 and Apex mark can be used as a standard mark. And for EDU and SmarPex, the Apex mark can be recommended to be used as a standard mark.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.52-57
• /
• 2006

In this paper, the triple-band planar monopole antennas are designed for cellular communication, WiBro and WLAN(IEEE802.11b/g) communication and WLAN(IEEE802.11a) communication of 5GHz band to using filled mobile convergence subscriber unit. Various types of antennas are designed and examined experimentally as bended in the low and middle band radiation elements to decrease antennas size and increased the width of radiation elements to improve bandwidth The proposed antennas are reduced by 11% in antenna size with bended low-band radiation elements down and are extended by $30%{\sim}40%$ in bandwidth by increasing the width of the radiation element at 800MHz band.

• Spatial Information Research
• /
• v.13 no.4 s.35
• /
• pp.373-380
• /
• 2005

Mobile Mapping Systems are effective systems to acquire the position and image data using vehicle equipped with the GPS (Global Positioning System), IMU (Inertial Measurement Unit), and CCD camera. They are used in various fields of road facility management, map update, and etc. In the general photogrammetry such as aerial photogrammetry, GCP (Ground Control Point)s are needed to compute the image exterior orientation elements (the position and attitude of camera). These points are measured by field survey at the time of data acquisition. But it costs much time and money. Moreover, it is not possible to make sufficient GCP as much as we want. However Mobile Mapping Systems are more efficient both in time and money because they can obtain the position and attitude of camera at the time of photographing. That is, Image Orientation Technique must use GCP to compute the image exterior orientation elements, but on the other hand Direct Georeferencing can directly compute the image exterior orientation elements by GPS/INS. In this paper, we analyze about the positional accuracy comparison of ground point using the Image Orientation Technique and Direct Georeferencing Technique.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.7 no.1
• /
• pp.293-317
• /
• 1994

The Purpose of this study is to verify the effect of the searcher's subject background on the result of online database searches. To achieve this purpose, an experimental method was adopted. 180 students performed online searches in the three different libraries chosen for this study. The subjects were classified into two groups according to the scores of the test. Data concerning processes, behavior, and results of the searches performed by the subjects in real situations were gathered. Immediately following the searches, the extent of their subject background were assessed through interview. The search effect consists of the 4 elements： search efficiency (the number of terms used per unit time), the number of relevant documents, the number of relevant documents per unit time, precision ratio. The major findings of this study are summarized as belows. 1. The searchers with strong subject background has significantly higher efficiency in searches made. Group A (of those with strong subject back-ground) use more search terms per unit time than Group B (of those with weak subject background) do. 2. In the searches made by those with strong subject background, more relevant documents art retrieved. 3. In the searches made by those with strong subject background, more relevant documents per unit time are retrieved. 4. The searchers with strong subject background has significantly higher precision ratio in searches made. In the searches made by those with strong subject background, more relevant documents of documents retrieved are retrieved.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.91-100
• /
• 2012

This paper not only reviews recent trends and characteristics of welfare facilities, but also proposes main components such as building materials and furniture applying a traditional Korean house. This paper aims to utilize interior design and construction materials of unit-care welfare facility applying the traditional Korean house. Results are as follows. 1. The rate of the private bedroom as elderly welfare facilities is 63.1%; on the contrary, the rate of the 4-person bedroom is 63.2%. The expansion of the private bedroom is an urgent need in order to improve the quality of residences. 2. According to elderly services needs and revitalization for the traditional Korean house, it is required to implementation the unit-care facilities for the elderly and interior design for the traditional Korean house. 3. The interior design for the traditional Korean house is applied to elderly living space such as a bedroom and a living room; it is not applied to care space and management space such as a nurse station and an office occupied by employees. 4. There is no problem to construct space applying the traditional Korean house using interior products currently being sold in the domestic market. 5. Standardized mass production is essential to popularize the traditional Korean house style interior.

• Nuclear Engineering and Technology
• /
• v.7 no.4
• /
• pp.295-310
• /
• 1975

A system of model price data for the fuel cost estimation of the Go-ri plant is developed. With the application of MITCOST-II computer code the levelized unit fuel costs over the entire lifetime of the plant are evaluated. It is found that the overall levelized unit fuel cost is 7.332 mills/Kwhe and that the uranium ore and enrichment service represent more than 85% of the unit cost, assuming a simple once-through fuel cycle process with no reprocessing of the spent fuel. The effects of the cost fluctuations in these fuel cycle elements and the capacity factor changes are also evaluated. The results indicate that the fuel costs are most sensitive to the variation of uranium ore price. Efforts must, therefore, be employed for the arrangement of cheap and timely supply of uranium ore in order to achieve the economic generation of nuclear power.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1156-1159
• /
• 2017

The various ground support equipments are necessary for KSLV-II ground operation at the assembly building located in Naro Space Center. Among the various ground support equipments, the launch vehicle connection unit and high pressure flexible hose are important elements, because they are used for connection between the ground compressed gas supply system and the launch vehicle. In this paper, the development progress of the launch vehicle connection unit and high pressure flexible hose are introduced.