• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.152.2-152
• /
• 2001

This paper investigates the effect of the conducted EMI Electromagnetic Interference and the switching loss which occurs from the switching devices in the switching period of the unipolar and limited unipolar switching circuits. The three main sources of conducted EMI and switching loss in the unipolar and limited unipolar switching circuit come from the switching devices, the number of switching times in the switching period and their switching waveform. In this paper, these three parameters are used to determine the conducted EMI which generated from the unipolar and limited unipolar switching circuits and to improve the limited unipolar switching circuit which uses the power MOSFET´s as the switching devices. The significant reduction of Ire conducted EMI ...

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.539-545
• /
• 2013

In this paper, a behavioral current-voltage model with intermediate states is proposed for analog applications of unipolar resistive memories, where intermediate resistance values between SET and RESET state are used to store analog data. In this model, SET and RESET behaviors are unified into one equation by the blending function and the percentage volume fraction of each region is modeled by the Johnson-Mehl-Avrami (JMA) equation that can describe the time-dependent phase transformation of unipolar memory. The proposed model is verified by the measured results of $TiO_2$ unipolar memory and tested by the SPECTRE circuit simulation with CMOS read and write circuits for unipolar resistive memories. With the proposed model, we also show that the behavioral model that combines the blending equation and JMA kinetics can universally describe not only unipolar memories but also bipolar ones. This universal behavioral model can be useful in practical applications, where various kinds of both unipolar and bipolar memories are being intensively studied, regardless of polarity of resistive memories.

• 한국의류학회지
• /
• 제28권2호
• /
• pp.235-242
• /
• 2004

The purpose of this study was to develop a scale for the evaluation of the subjective fabric hand. In order to find out the appropriate method for the evaluation, bipolar adjectives were compared to unipolar adjectives. One hundred female university students we.e selected as judges. They assessed 9 fabrics using the 9 point scale system for both bipolar and unipolar adjectives. When using the bipola. scale, judges responded more consistently showing smaller deviation among their responses. The Judges seemed to understand the meanings of adjectives in the bipolar scale more clearly than in the unipolar scale. Unipolar scale has twice the number of questions than bipolar scale does. Therefore. judges often felt bored responding to the questions using unipolar adjectives. If the appropriate antonym can be found through verified method, bipolar scale seems to have more advantages than unipolar scale.

• 전력전자학회논문지
• /
• 제13권3호
• /
• pp.221-228
• /
• 2008

본 논문에서는 BLDC MOTOR를 2상 여자 unipolar PWM방식으로 구동할 때 개방된 상의 역병렬 다이오드를 통해 원치 않는 누설전류의 흐름이 생기는 원인 및 영향을 분석하고 이를 제거할 수 있는 개선된 unipolar PWM 방식을 제안하였다. 개방된 상에 흐르는 누설전류는 속도가 증가할수록, PWM duty가 감소할수록 증가하며 전동기 출력의 손실을 초래한다. 제안된 unipolar PWM방식의 유효성을 시뮬레이션 및 실험을 통하여 검증하였다.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.193-199
• /
• 2015

This paper proposes a regeneration braking algorithm for Brushless DC (BLDC) motor system. The unipolar switching method has a limitation about the regeneration braking when the BLDC motor is operated in the low speed region. The proposed algorithm alternatively utilizes the unipolar and bipolar switching method to implement the regeneration braking for overall speed range. The bipolar switching method is used when the BLDC motor is operated in the low speed region. The switching transition point is determined by analyzing the unipolar and bipolar switching during the regeneration braking. The effectiveness of proposed algorithm is verified by using the experimental results.

• 한국산학기술학회논문지
• /
• 제4권4호
• /
• pp.361-365
• /
• 2003

Oxide etcher장비에서 실리콘 웨이퍼를 잡고 공정을 수행할 수 있는 단극 (unipolar) 형태의 E-chuck을 제작하였다. 단극 형태의 E-chuck을 개발하기 위하여 핵심기술인 폴리이미드 박막의 코팅기술과 알미늄 표면의 양극처리기술을 개발하였다. E-chutk은 폴리이미드 재료를 표면 물질로 사용하여 플라스마에 의한 표면 손상을 최소화하였다. Oxide etcher 장비에 사용되는 핵심 부품인 E-chuck의 제조 과정을 살펴보고 히터 내장형 E-chuck을 위한 박막형 전열체 기술을 개발하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권7호
• /
• pp.491-500
• /
• 2004

This paper considers a hybrid PWM(pulse width modulation) method which can be used in the brushless DC motor controller. Due to many disadvantages of bipolar PWM method, unipolar PWM method is mostly used in industrial field. In constant speed control application, the unipolar PWM method shows the good performance of speed control. But in the wide range of speed control application, it shows poor performance especially when deceleration is needed. So we propose the hybrid PWM method that utilizes both of bipolar and unipolar PWM methods according to the sign of the speed controller output. Simulation and experimental result show that the proposed method improves speed control performance of the brushless DC motor which is applied to the industrial sewing machines.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.121-123
• /
• 2020

본 논문은 단상 3레벨 조건에서 unipolar 및 bipolar PWM의 구현 및 동작에 대해 서술하였으며, 교류전기철도용 전력보상장치의 병렬 운전 상황에서 unipolar PWM과 bipolar PWM에 따른 인터리빙 효과에 대해 비교하였다. 또한, unipolar PWM 조건에서 전력보상장치의 3병렬과 4병렬 시스템의 인터리빙 결과에 대해 비교하였다. 이를 통해 단상 unipolar PWM을 사용한 병렬 시스템의 인터리빙이라는 특수한 조건에서는 PWM 캐리어의 180° phase shift가 포함되는 2병렬 및 4병렬의 경우 마치 bipolar PWM처럼 동작하여 스위칭 리플의 저감효과가 기대한 결과보다 낮음을 확인하였다. 따라서 스위칭 리플의 저감 측면만을 고려한다면 전력보상장치의 병렬 시스템은 180° 캐리어가 포함된 4병렬 시스템보다 120° 캐리어를 사용하는 3병렬 시스템이 유리한 것을 확인하였다.

• 대한기계학회논문집
• /
• 제18권2호
• /
• pp.432-445
• /
• 1994

From a theoretical analysis point of view, the 2-stage precipitator is decomposed into two units: charging cell and collecting cell. Collection efficiency predictions of the two-stage parallel-plate electrostatic precipitator have been performed theoretically incorporating with the charging and the collecting cells. Particle trajectorise passing the charging cell have been modeled as a simple one. Particle charge distribution at the outlet of the charging cell is calculated through integration of the present unipolar combined charging rate along the entire particle trajectory, and average charge of particles at the outlet of the charging cell is obtained from the particle charge distribution. As for the collecting cell, the diminution of particle concentration along the longitudinal direction of the collecting cell is investigated considering the conventional Deutsch's theory and the laminar theory. One should note that the collection efficiency formula derived is based on monodisperse aerosols. It has been confirmed through the analysis that predictions of particle charge by applying White's unipolar diffusion charging theory overpredict actual cases in the continuum regime, while predictions by Fuch's unipolar diffusion charging theory indicate the reasonable result in the same regime. Theoretical predictions of collection efficiency are also compared with the available experimental results. Comparisons show that the experimental results are consistently located in the collection efficiency region bounded by the two limits, the Deutsch and the laminar collection efficiencies. Finally design parameters of the 2-stage electrostatic precipitator have been investigated systematically through the one-variable-at-a-time method in terms of collection efficiency. Applied voltages on the corona wire of the charging cell and the plate of the collecting cell, and the average air velocity have been selected as the design parameters.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1357-1368
• /
• 2018

In this paper, a novel high gain bidirectional modular dc-dc converter (BMC) with unipolar and bipolar structures for dc network interconnections is proposed. When compared with traditional dc grid-connecting converters, the proposed converter can achieve a high voltage gain with a simple modular transformerless structure. A sub-modular structure for the BMC is proposed to eliminate the unbalanced current stress between the different power units (levels) in the BMC. This can realize current sharing and standardized production and assembling. In addition, phase-interval operation is introduced to the sub-modules to realize low voltage and current ripple in both sides of the converter. Furthermore, two types of bipolar topologies of the sub-modular BMC were proposed to extend its application in bipolar dc network connections. In addition, the control system was optimized for grid-connection applications by providing various control strategies. Finally, simulations of a 3-level unipolar sub-modular BMC and a 4-level bipolar sub-modular BMC were conducted, and a 1-kW experimental 3-level unipolar prototype was developed to verify the effectiveness of the proposed converter.