• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.05a
• /
• pp.116-122
• /
• 2004

Since the 18th century the museums in Europe have accepted the social demand of the publicity and have played a role of social education and it lasted to the present. Recently, the society began to change it's direction. It is from the Universalism to the Pluralism. The Universalism is due to democratic society after 'the Civil Revolution' and standardized social system after 'the Industrial Revolution' The Pluralism that starts with the decrease of the modern society is about the diversity and the activation of identity which has been disregarded since the Modernism. This study is to analyze and to clarify how the museum's educational environment which had begun since the 18th century has been changed since 1990 and how these are related to the social alteration from the Universalism to the Pluralism. As a result of this study, it was confirmed that there had been a simple circulation system and a unified spatial experience in the museum of Europe since 18th century to 1980's(phl) while there had been a complex circulation system and a diverse spatial experience in the museum of Europe after 1990's(ph2). These mean that the museum of phl gave a unified social education to the visitors and they came to have a similar knowledge and emotion after their seeing the exhibition material while the museums of 'ph2' gave a diverse one and the visitor came to have a different knowledge and emotion to the same exhibition material. The museum which gives a unified social education is to produce a unified thoughts of people and it is because the social direction is the Universalism. In addition to this, the museum of diverse social education is to produce people of diversity and it is related to the Pluralism.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1015-1022
• /
• 2012

This paper deals with hardware design which unifies MD5 and HAS-160 hash algorithms. Two algorithms get a message with arbitrary length and process message blocks divided into 512 bits each time and output a hash code with a fixed length. MD5 ouputs a hash code of 128 bits and HAS-160 a hash code of 160 bits. The unified hash core designed has 32% of slices overhead compared to HAS-160 core. However, there is only a fixed message buffer space used. The unified hash core which run a step in one clock cycle operates at 92MHz and has performance which digests a message in the speed of 724Mbps at MD5 and 581Mbps at HAS-160 hash mode. The unified hash core which is designed can be applicable to the areas such as E-commerce, data integrity and digital signature.

• Communications for Statistical Applications and Methods
• /
• v.29 no.4
• /
• pp.421-439
• /
• 2022

Phase I dose-finding trials are essential in drug development. By finding the maximum tolerated dose (MTD) of a new drug or treatment, a Phase I trial establishes the recommended doses for later-phase testing. The primary toxicity endpoint of interest is often a binary variable, which describes an event of a patient who experiences dose-limiting toxicity. However, there is a growing interest in dose-finding studies regarding non-binary outcomes, defined by either the weighted sum of rates of various toxicity grades or a continuous outcome. Although several novel methods have been proposed in the literature, accessible software is still lacking to implement these methods. This study introduces a newly developed R package, UnifiedDoseFinding, which implements three phase I dose-finding methods with non-binary outcomes (Quasi- and Robust Quasi-CRM designs by Yuan et al. (2007) and Pan et al. (2014), gBOIN design by Mu et al. (2019), and by a method by Ivanova and Kim (2009)). For each of the methods, UnifiedDoseFinding provides corresponding functions that begin with next that determines the dose for the next cohort of patients, select, which selects the MTD defined by the non-binary toxicity endpoint when the trial is completed, and get oc, which obtains the operating characteristics. Three real examples are provided to help practitioners use these methods. The R package UnifiedDoseFinding, which is accessible in R CRAN, provides a user-friendly tool to facilitate the implementation of innovative dose-finding studies with nonbinary outcomes.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.227-236
• /
• 2021

This research proposes a modeling and controller design of a three-level boost (TLB) converter for the implementation of maximum power point tracking (MPPT) in the photovoltaic power conditioning system (PCS). Contrary to the output voltage control of the conventional controller, the Photovoltaic PCS requires an input voltage controller for MPPT operation. A TLB converter has the advantage of decreasing the inductor size and increasing efficiency compared with the existing booster converter. However, an optimal controller is difficult to design due to the complexity of the TLB operations, which have two operational modes on the duty ratio boundary of 0.5. Therefore, the unified linear model equations of the TLB converters, which can be applicable to both operational modes, are derived using linearized solar cell expressions. Furthermore, the transfer functions are obtained for the controller design. The MPPT voltage controller is designed using MATLAB SISOTOOL. In addition, a controller for capacitor voltage unbalancing is described and designed. The simulations and experimental verifications are conducted to verify the effectiveness of the small-signal analysis and control system design.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.99-106
• /
• 1998

This paper presents a procedure for determining the design rainfall depth and the design rainfall intensity at Incheon city area in Korea. In this study the eight probability distributions are considered to estimate the probable rainfall depths for 11 different durations. The Kolmogorov - Smirnov test and the Chi-square test are adopted to test each distribution. The probable rainfall intensity formulas are then determined by i) the least squares (LS) method, ii) the least median squares (LMS) method, iii) the reweighted least squares method based on the LMS (RLS), and iv) the constrained regression (CR) model. The Talbot, the Sherman, the Japanese, and the Unified type are considered to determine the best type for the Incheon station. The root mean squared (RMS) errors are computed to test the formulas derived by four methods. It is found that the Unified type is the most reliable and that all methods presented herein are acceptable for determining the coefficients of rainfall intensity formulas from an engineering point of view.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.523-526
• /
• 1998

In an ongoing project at ETRI-CSTL, A debugger for distributed programs that run on a varied collection of machines is being built. To build such debugger, a clientserver model is incorporated. This strategy enables us to provide a unified user interface and isolate debugger core from the user interface. Several debugging servers running on a diverse set of platforms permit the implementation of a distributed debugger for heterogeneous environment, and the single debugging client provides unified debugging concept and graphical user interface over various servers. Also, the precise specification of the interaction protocol between the client and server facilitates client to be paired with a variety of server implementantations. This paper describes the design and implementation of our debugger, concentrating on the system architecture.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1099-1108
• /
• 2001

In this paper, we proposed an efficient method of management in which various design objects in the environments for distributed software development. Those design objects are created in the environments for distributed software development based on Unified Modeling Language as well as versions of source codes. In this research, a version control technique has been specially focused that is based on our proposed version rules to consistently control versions from web-based distributed software development which enables developers to independently manage distributed objects from the software development platform. Based on the version control technique, we have designed a web-based rule-control version management model that has been proposed here.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.12
• /
• pp.1697-1712
• /
• 2002

Unified Modeling Language (UML) is a standard language for specifying, visualizing, constructing, and documenting the artifacts of software systems. It simplifies the complex process of software design, making a blueprint for construction. In this paper, we apply automated application generation tools such as Rational Rose and BizWiz to a realistic cyber shopping mall and then compare and analyze them in the view of UML. We also propose some methods for the systematic system analysis, design, and implementation by applying UML to a customer management system based on above results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1191-1198
• /
• 2005

To designer and builder because drilling log, last accomplishment of boring, is made by subsurface expbration of site person in charge base information intermediate delivered by unified style as is concise be. However, make and is using drilling log that is dissimilar in each engine without style or creation standard unified in the case of domestic. Civil engineers lose an opportunity that can get more informations thereby or problem of inappropriate design, construction often happens. In this study, analyzed drilling log style examination of inside and outside of the country and merits and demerits to solve problem of these design and construction. And study improvement item on recording contents and suggested consistent drilling log standard illustration plan.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.65-67
• /
• 2001

This paper presents an application of UML(Unified Modeling Language) to develop the Transmission Loss Calculation Package (TLCP) and shows a feasibility of UML design for the power system analyzing software. In the rapidly restructuring electric power industry, it is required the development of efficient and transparent transmission pricing mechanism. This should be based to calculate an accurate transmission loss to prompt a fair competition and to give unbiased signals to all the market players. For those reasons, it is necessary to develop a software system for transmission loss calculation. In this paper, we design the TLCP based on UML, and describe using Rational Rose 2000.