• Journal of Korean Library and Information Science Society
• /
• v.18
• /
• pp.139-192
• /
• 1991

Though the computer has become deeply entrenched as the major tool in information processing(library works), it may be obvious that automatic book classification techniques ate still under experimentation, and the techniques have not yet been tested against the criterion of usefulness. The purpose of this study is to design of knowledge base for automatic book classification which can be put to use in library operation, and to present a methodology of application of the automatic classification into the library. Since the enumerative classification schemes which are existing are manual systems, it cannot be applied to the automatic classification, the principle of faceted classification based on concept analysis is brought in and studied. The result of this study are summarized as follows : 1. The design of knowledge base confined the field of agriculture and medicine. 2. If title is entered by the computer keyboard it will be searched in knowledge base, and then be classified by the principle of automatic classification. 3. Program flowcharts are designed as a bases of classification procedures for automatic subject recognition and classification. 4. 283 books in agriculture, 196 books in medicine were drawn at random from Taegu University Library and Young-Nal Medical Center Library respectively. 5. The experiment of automatic classification is performed 143 books in agriculture 166 books in medicine except for other subject books. 6. It was proved that automatic book classification is possible by design of knowledge base. In addition the expected values from design of knowledge base for automatic book classification are as follows : 1. The prompt and accurate process of classification is possible. 2. Though some title is classified in any library, it can be classified the some classification number by a program. 3. The user can retrieve the classification codes of books for which he or she wants to search through the computer. 4. Since the concept coordination method is employed the representing of a multisubject concept is make simple. 5. By performing automatic book classification the automation of total system can be achieved. 6. The efficient international information transfer will be advanced since all the institution maintain unified classification number.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.261-267
• /
• 2002

In SOC(System On a Chip) designs, reducing time and cast for design verification is the most critical to improve the design productivity. this is mainly because the designs require co-verifying HW together with SW, which results in the increase of verification complexity drastically. In this paper, to cope with the verification crisis in SOC designs, we propose a new verification methodology, so called integrated co-verification, which lightly combine both co-simulation and co-emulation in unified and seamless way. We have applied our integrated co-verification to ARM/AMBA platform-based co-verification environment with a commercial co-verification tool, Seamless CVE, and a physical prototyping board. The experiments has shown clear advantage of the proposed technique over conventional ones.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.325-335
• /
• 2018

Limited access to state information in the design of a feedback controller has brought out a significant amount of research on the design of an output feedback controller. Despite its long endeavor to find an optimal one, it is still an open problem. Thus, we focus on the comparison of existing states of arts in the design of a static output feedback controller in terms of stability and complexity so as to find further research direction in this field. To this end, we present eight design methods in a unified presentation. We also provide the complete description of algorithms which can be applicable to any system configuration. Stability performance and complexity in terms of processing time are evaluated through numerical simulations. Simulation results show that the algebraic controller (AC) algorithm [20] has the smallest complexity while the scaling linear matrix inequality (SLMI) algorithm [18] seems to achieve the best stability in most cases with much higher complexity.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.89-100
• /
• 2016

This article analyzes two different strategies that both aim at creating innovative design or problem solving: design thinking and action learning. User-driven innovation strategy that has become more and more popular during the last decades is "design thinking". Based on designerly methods and principles, this strategy was developed by the design consultancy IDEO in the late 90s. Action learning is a pragmatic and moral philosophy based on a deeply humanistic view of human potential that commits us, via experiential learning, to address the intractable problems of organizations and societies. This paper provides a structured analysis and comparison of the two innovation strategies-design thinking and action learning-with the goal to identify potentials to enrich either of the two by merging or adapting specific parts or aspects. Although there are significant differences in both strategies, there are also several similarities in methodology and process design. This article compares process models for action learning and design thinking and highlights the specific differences and similarities. As a result, we suggested a union model of action learning and design thinking, and verified a this model through a case study. We complemented the process of team building and reflection of action learning for union model. Also, we statistically verified through a case study to validate the superiority of the design thinking model which complemented action learning. This article contributes to a better understanding of both-design thinking and action learning, and it may help to improve either of the two strategies to foster social innovation.

• Archives of design research
• /
• no.18
• /
• pp.165-174
• /
• 1996

In the I950s the German firm Braun began to pursue a policy of uncompromising modem design for products aimed at the upper reaches of the market. Dr. Fritz Eichler as a head of design with Hans Gugelot and Otl Aicher in the Graduate School VIm developed the guide line of Braun Design strategy as the foundation of the corporate identity programme. In 1955 Dieter Rams joined the staff, and was largely responsible for establishing the formal characteristics of Braun Design and its further development. In the mid-1950s complete product programme of the firm Braun began to be re-designed, and these undoubtedly hit the market. New design line of the firm Braun, was an exclusive avantgarde movement at that time, which became to be the epitome of the idea of an objectifiable "Good Form". By the result in the 60s and 70s, when Braun product program was completely re-designed to the new line, Braun Design had a decisive influence on the design scene of the world. Braun Design is essentially functional and concrete, which depends on perfect fulfillment of purpose, precision, safety, durability, the quality of the product and, more recently, environmental compatibility is similarly balanced and unified approach, eliminating every unnecessary detail and concentrating on ordering essential elements. elements.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.185-193
• /
• 2011

In the present study, a unified shear design method was developed to evaluate the shear strength of concrete beams with and without FRP shear reinforcement. The contributions of FRP and concrete on shear strength were defined separately. By comparing the current design method calculated results with the existing test results, it was found that Triantafillou model shows a reliable prediction of FRP effective strain and FRP shear strength contributions. The concrete shear strength contribution was defined by the strain-based shear strength model developed in the previous study. The shear strength of concrete compression zone was evaluated based on the material failure criteria of the concrete subjected to the compressive normal and shear stresses. The proposed strength model was verified by comparing its prediction results to prior test results. The comparisons showed that the proposed method accurately predicts the strengths of the test specimens for both FRP shear reinforced and unreinforced concrete beams.

• Korean Institute of Interior Design Journal
• /
• v.24 no.3
• /
• pp.48-58
• /
• 2015

This study is to conclude a direction for Information Commons, which supports the university library in a new role. The study explains perspectives on the changing role of the university library by examining the approaches, histories, and theories practiced by various researchers on Information Commons. The study aims to discover ways of improving the library space that are dedicated to technology using Information Commons, it also examines ways of creating a unified "library space" that will support learning and access to knowledge and information. The features of Cultural Commons include making improvements to technology-centered space, and providing support to research, freedom of speech, creative approach, public freedom and collaboration, and interaction. The functions of Cultural Commons within the university library are listed: First, it supports programs that will transform the library into a social hub within the university. The space specifically blurs the boundary between the library building and its surroundings, and unifies these spaces to enhance its catalytic role in aiding social interactions and human-centered approach. Second, it supports active participation through cultural programs and provides a fluid and interactive space with virtual resources. Third, it enhances user experience to supports behaviors and activities that involve fixtures and equipment in the space to promote learning. The study notes that, with the emergence of these characteristics, the university library is changing by implementing Cultural Commons for on-campus social space and new learning. Accordingly, this implementation is expected to enhance active acceptance of the library space in the future.

• The Journal of Information Systems
• /
• v.13 no.1
• /
• pp.77-95
• /
• 2004

According to the increase of organizational complexity and the change of rapid information technology environment, many firms have shifted their information technology(IT) strategy from developing information systems in-house to purchasing application software such as Enterprise Resource Planning(ERP) Systems. Marketing and Sales functions within a Korean automotive part company include developing new assembly products, determining pricing, taking customer's orders, and shipping assembly products to customers. Marketing and Sales Information System(MSIS) in ERP system plays an important role in next Production Planning process. MSIS also makes management reporting and decision making faster and more uniform throughout an organization. MSIS promotes thinking about corporate goals, as opposed to thinking only about the goals of a single department or functional area. This paper intends to design and implement a MSIS in ERP systems for Korean automotive part company using object-oriented methodology In order to accomplish the implementation of MSIS in ERP system, we employed UML as its standard modeling language. In this study, four diagramming techniques such as use case diagram, sequence diagram, class diagram, component diagram among eight modeling techniques are used for analyzing hierarchical business process. In traditional marketing and sales function, a company with an unintegrated information system can have marketing and sales data that is data redundant or inaccurate. MSIS integrated in ERP system can solve the sales forecast problem, which minimizes the total costs of production, inventory, and transportation under constraints of production capacity. Also, the use of UML methodology makes S/W programmers shorten the phase of analysis and design in the implementation of MSIS system, and increase the reuse of software and the interoperability with corporate internal Information system.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1732-1741
• /
• 2020

The structural integrity of welded joints in the reactor pressure vessel (RPV) is directly related to the safety of nuclear power plants. The RPV is made from SA508-III steel in a pressurized water reactor. In this study, we investigated the effects of temperature on the tensile and fracture toughness properties of Chinese SA508-III welded joint in different sampling areas in order to provide reference data for structural integrity assessments of RPVs. The specimens used in tensile and fracture toughness tests were fabricated from the base metal (BM), weld metal (WM), and the heat-affected zone (HAZ) in the welded joint. The representative testing temperatures included the ambient temperature (20 ℃), upper shelf temperature (100 ℃), and service temperature (320 ℃). The results showed that temperature greatly affected the fracture toughness (JIC) values for the SA508-III welded joint. The JIC values for BM and HAZ both decreased remarkably from 20 ℃ to 320 ℃. The fracture morphologies showed that the BM and HAZ in the welded joint exhibited fully ductile fracture at 20 ℃, whereas partial cleavage fracture was mixed in ductile fracture mode at 100 ℃ and 320 ℃. The WM exhibited the ductile and cleavage fracture mixed mode at various temperatures, and the JIC values showed slight changes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.602-612
• /
• 2010

In this paper, we propose an object-oriented modeling technique using UML(Unified Modeling Language) for accessibility of user and efficiency of facilities under Web-based integrated manufacturing management system application. For this, we first collect user requirements and related technology of integrated manufacturing system, and then design proposed system considering business flow and various essential design part(class, component, package, use case, and etc) to reduce system risk as well as communicate peacefully between developers in system redevelopments. Additionally, we develop database of manufacturing master code, check management, repair management and error management for proposed systems. Finally, we design and implement our three main modules; manufacturing check module, manufacturing repair module, manufacturing error module under Web-based environments with JSP language.