• International Journal of Contents
• /
• v.10 no.2
• /
• pp.67-73
• /
• 2014

With a population of around 237,424,363 in 33 provinces, Indonesia is one developing countries that needs an excellent School Management Information System (SMIS) to accomplish its educational mission. To reach the goal, it is necessary to know the rules, culture of school and related data prior to building the SMIS. This study is focused on the Indonesian National Education Standards. It is has nine standards that are described by the Regulation of Education Ministry. To manage the schools' organization, this paper aims to develop a SMIS based on the Indonesian National Education Standards by using ARIS(Architecture of Integrated Information System) to help schools run efficiently. The new system will be built using UML(Unified Modeling Language), this new system conforms to the education rules of the government. Finally, the conclusion and future research are described.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.419-431
• /
• 2004

The dynamic response of a cracked functionally graded piezoelectric material (FGPM) under transient anti-plane shear mechanical and in-plane electrical loads is investigated in the present paper. It is assumed that the electroelastic material properties of the FGPM vary smoothly in the form of an exponential function along the thickness of the strip. The analysis is conducted on the basis of the unified (or natural) crack boundary condition which is related to the ellipsoidal crack parameters. By using the Laplace and Fourier transforms, the problem is reduced to the solutions of Fredholm integral equations of the second kind. Numerical results for the stress intensity factor and crack sliding displacement are presented to show the influences of the elliptic crack parameters, the electric field, FGPM gradation, crack length, and electromechanical coupling coefficient.

• Journal of the Korean Statistical Society
• /
• v.31 no.4
• /
• pp.415-431
• /
• 2002

A unified framework for statistical inference for the mean of the normal distribution to derive point estimates, confidence intervals and statistical tests is proposed. This optimal design is justified after investigating the basic information and requirements that are possible and impossible to control when specifying practical and statistical requirements. Point estimation is only credible when viewed in the larger context of interval estimation, since the information required for optimal point estimation is unspecifiable. Triple sampling is proposed and justified as a reasonable sampling vehicle to achieve the specifiable requirements within the unified framework.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.10-17
• /
• 2001

With the introduction of durability examination into design code of concrete structure, a prediction of early-age behavior of concrete and its cracking resistance becomes very important. But, the early-age behaviors such as hydration, micro-structure development, moisture transport and mechanical properties development is quite complicated and coupled each other, and thus those can not be solved independently. One way to analyze those is to model their behaviors analytically and solve those computationally within a unified framework. In this paper, we propose a finite element technique to predict the early-age behaviors of concrete within the unified framework. The technique is applied to evaluatio of cracking in a massive concrete structure and then the analysis results are discussed.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.389-391
• /
• 2005

This paper describes experimental analysis of UPFC, which is composed of cascaded H-bridge modules and single-phase multi-winding transformers for isolation. The operational characteristic was analyzed through experimental works with a scaled model, and simulation results with PSCAD/EMTDC. The UPFC proposed In this paper can be directly connected to the transmission line without series injection transformers. It has flexibility to expand the operation voltage by increasing the number of H-bridge modules. The analysis results can be utilized to design the actual UPFC system applicable for the transmission system.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.161-169
• /
• 2013

This paper proposes a novel control strategy for a unified power quality conditioner (UPQC) including a series and a shunt active power filter (APF) to compensate the harmonics in both the distorted supply voltage and the nonlinear load current. In the series APF control scheme, a proportional-integral (PI) controller and a resonant controller tuned at six multiples of the fundamental frequency of the network ($6{\omega}_s$) are performed to compensate the harmonics in the distorted source. Meanwhile, a PI controller and three resonant controllers tuned at $6n{\omega}_s$(n=1, 2, 3) are designed in the shunt APF control scheme to mitigate the harmonic currents produced by nonlinear loads. The performance of the proposed UPQC is significantly improved when compared to that of the conventional control strategy thanks to the effective design of the resonant controllers. The feasibility of the proposed UPQC control scheme is validated through simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.93-96
• /
• 2005

This paper describes experimental analysis of UPQC, which is composed of cascaded H-bridges and single-phase multi-winding transformers. The operational characteristic was analyzed through experimental works with a scaled model, and simulations with PSCAD/EMTDC. The UPQC proposed in this paper can be directly connected to the distribution line without series injection transformers. It has flexibility to expand the operation voltage by increasing the number of H-bridge modules. The analysis results can be utilized to design the actual UPQC system applicable for the actual distribution system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.170-177
• /
• 1998

In this paper, a unified solution of Hankel norm approximation problem is proposed by $\delta$-operator. To derive the main result, all-pass property is derived from the inner and co-inner property in the $\delta$-domain. The solution of all-pass becomes an optimal Hankel norm approximation problem in .delta.-domain through LLFT(Low Linear Fractional Transformation) inserting feedback term $\phi(\gamma)$, which is a free design parameter, to hold the error bound desired against the variance between the original model and the solution of Hankel norm approximation problem. The proposed solution does not only cover continuous and discrete ones depending on sampling interval but also plays a key role in robust control and model reduction problem. The verification of the proposed solution is exemplified via simulation for the zero-order Hankel norm approximation problem and the model reduction problem applied to a 16th order MIMO system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.160-161
• /
• 2018

ITU-R Study Group Working Party 5B에서는 해상에서 자율운항선을 안전하게 운항하기 위해 자율운항선을 통한 제어센터-VTS, 제어센터-유인선 간의 정보교환이 이루어 질 수 있도록 Vessel traffic control voice relay의 기능을 제시하였다. 이에 자율운항선을 통해 제어센터-VTS, 제어센터-유인선 간의 원활한 정보교환이 가능하도록 사용자 기능 요구사항, 사용자 비기능 요구사항, 인터페이스 요구사항으로 분석함으로써 통신중계시스템 설계 및 각 운용 기기별 정보교환 체계를 구축하였다. 하지만 자율운항선-타 선박간의 충돌 위험성을 감지할 경우 충돌회피를 위한 흐름 및 통신중계시템을 활용한 메시지 처리과정은 설계되지 아니한 실정이다. 이에 본 연구에서는 액티비티, 제어흐름, 작업 흐름 등의 표현이 가능한 UML(unified modeling language)을 활용함으로써 항해단계 중 발생할 수 있는 상황별 시나리오를 제어 흐름 형태로 표현한 정보교환 메시지 처리 알고리즘을 제안하고자 한다.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.