• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.68-69
• /
• 2023

Recently, decarbonization has been emphasized worldwide to cope with climate change, and carbon neutrality by 2050 has emerged as a global agenda. The domestic port authorities have been participating in the global agenda in line with the government regulations. Since 2010, when decarbonization has been regarded as an important assignment in ports, container terminal efficiency considering undesirable outputs such as Carbon dioxide has been analyzed. However, most previous studies measured carbon dioxide emissions according to the Tier 1 and it is a first time to analyze container terminal efficiency based on the Tier 3 presented in the IPCC guidelines. 17 domestic container terminal operators were considered as decision making units and DEA-SBM Model was used. Subsequently, Undesirable outputs model was conducted to calculate the environmental efficiency.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.171-180
• /
• 2024

Recently, there has been a global emphasis on decarbonization in order to address climate change and achieve carbon neutrality by 2050. In line with government regulations, domestic port authorities have also started participating in this global agenda. Since 2010, when decarbonization became an important task in ports, there have been studies analyzing the environmental efficiency of container terminals, taking into account undesirable outputs. However, most of these previous studies only measured carbon dioxide emissions based on Tier 1, whereas this study is the first to analyze the environmental efficiency of South Korea's container terminals based on Tier 3, as presented in the IPCC guidelines. The study considered 17 container terminal operators in South Korea as decision-making units and used the DEA-SBM Model. Subsequently, an Undesirable Outputs Model was conducted to calculate the environmental efficiency.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.43-54
• /
• 2010

In order to improve the existing evaluation system of bus services and gain more reasonable analysis outputs, the authors evaluate the efficiency of 113 arterial bus routes in Seoul in 2009 using a modified BCC model considering not only desirable outputs but also undesirable outputs. Each Decision Making Unit (DMU) is assumed to use inputs such as possession costs, operating costs, the ratios of median bus stops overlapped route lengths to produce estimates of desirable outputs (the number of passengers and service satisfaction score) and undesirable outputs (CO2 emissions). According to the analysis, the modified BCC model considering both desirable outputs and undesirable outputs shows more appropriate results. DMUs would be more efficient on average to reduce nearly 10% of the 3 inputs (possession costs, operating costs, and overlapped route lengths) and increase by about 160% the ratios of median bus stops. Also, a Tobit regression analysis is conducted to identify the most effective variables for maximum efficiency and discover that the variable of possession costs and the ratios of median bus stops are statistically significant.

• Journal of Navigation and Port Research
• /
• v.46 no.2
• /
• pp.110-120
• /
• 2022

Spain is Europe's second-largest country with total throughput reaching 16.7 million twenty-foot equivalent units (TEU) by 2020. The purpose of this study was to measure and compare the efficiency of 17 container terminals. As a study method, the DEA-CCR model, undesirable variable, and Malmquist Index (MI) were used for data envelopment analysis (DEA). The study results are as follow: (1) DEA-CCR is used to evaluate basic efficiency. The most efficient terminals are decision-making units DMU 1 (APM Terminals (Algeciras Port)), DMU 2 (Total Terminal International Algeciras (Algeciras Port)) and DMU 5 (Barcelona Europe South Terminal (Barcelona Port)). (2) Undesirable DEA was conducted to suggest inefficiency from the undesirable output. Overall, the efficiency scores were reduced. However, DMU 1, DMU 2, and DMU 5 maintained efficiency scores regardless of the finish factor. (3) Malmquist Index was used to observe technology and efficiency changes dynamically. The changes in TCI affected Spanish container terminals more than the Technical Efficiency Change Index (TECI) in 2018-2019. However, in 2019-2020, the TECI was 2.706, higher than the TCI value, indicating that the change in TECI had more influence on the increase in productivity. This study offers a broader understanding of Spanish container terminals.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.977-979
• /
• 1996

This paper presents an algorithm to control the undesirable sway of a suspended load in the crane system that has a trade-off between positioning the load and suppressing the sway of the load. The aim is to transport the load to a specified place with small sway angle as quickly as possible. Dynamic model is based on a simple pendulum driven by a velocity drive that is mostly used for actuating a trolley in industry. Proposed algorithm is composed of two parts : one is a off-line optimal trajectory generator, the other on-line tracking control. The former produces optimal trajectories minimizing energy under the speed constraint of velocity drive. The latter controls outputs to track the generated trajectories. Digital simulations and experiments are performed on a pilot crane to demonstrate the performance of the proposed control algorithm.

• International Area Studies Review
• /
• v.14 no.3
• /
• pp.205-219
• /
• 2010

In general, industrial production involves large amounts of harmful by-product, causing serious pollution and ecological risk. Eco-efficiency, which indicates how efficient the economic activity is by considering both the environmental risks and economic performance, is a new concept for economic sustainability analysis and quantitative ecological risk analysis. Data envelopment analysis (DEA) has been widely used to examine eco-efficiency in recent years. Whereas traditional DEA models such as CCR and BCC model neglect undesirable outputs, this paper adopts a stochastic undesirable-output DEA model to measure the eco-efficiency of each province of China and Korea. The results indicate that whereas the eco-efficiency of the eastern region was the highest, that of the western region was the lowest. The reason may come from the negative external dis-economies of environment. And thus the governmental efforts for outreach on the underdeveloped regions should be promoted.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.1
• /
• pp.9-17
• /
• 2019

Purpose - Urban agglomeration construction is one of national strategic plans to accelerate the development of industrialization and urbanization in China, which has threatened the eco-environmental quality at the same time. This paper selected the urban agglomeration in the middle reaches of the Yangtze River as the research area. Research design, data, and methodology - The the slack-based measurement (SBM) model considering undesirable outputs is applied to measure the eco-efficiency of this urban agglomerations during 2006-2015. Results - The empirical results show that average eco-efficiency of the urban agglomeration in the middle reaches of the Yangtze River is 0.595. Regional ecological development is unbalanced. The highest eco-efficiency is recorded at Wuhan Metropolitan Area, and the lowest one is at the Changsha-Zhuzhou-Xiangtan City Group. Energy consumption and waste dust emissions are the key factors led to ecological inefficiency. Based on this, potentials for energy saving and waste dust reducing are calculated. Conclusions - Finally, this study provides policy implications targeted to promote the coordinating development of economy and eco-environment under the construction of urban agglomeration.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.783-793
• /
• 2020

The purpose of this study is to investigate whether the ECFA impacted the efficiency of banks in China and Taiwan from 2008 to 2017. This study follows Seiford and Zhu (2002), who recommend using the standard data envelopment analysis model to measure performance by increasing the desirable outputs and decreasing the undesirables. The finding was that overall technical efficiency increased from 2012 to 2017, reaching 0.575, 0.652, 0617, 0.689, 0.701 and 0.74, respectively. This result implies bank efficiency did indeed improve after China and Taiwan signed the ECFA cooperation agreement. The study found that the mean technical efficiency was 0.8756 in China, greater than Taiwan's mean of 0.3511, implying that Chinese banks experienced a greater increase in efficiency after signing the EFCA. One possible reason explored in this study is that China's economy is currently growing at the highest rate in the world, and the banks' efficiency has benefited from greater economic growth. This suggests that cross-strait sustained negotiations to consummate an agreement on trade in the services will be a very important mission in the future. This result also provides significant evidence suggesting that not accounting for undesirable output while estimating the evolution of the model may seriously distort efficiency results.

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.117-125
• /
• 2019

This study measured inefficiencies of Korean banks with weighted Russell directional distance function, WRDDM, for the years of 2004-2013. Checking contributions of inputs and outputs to these inefficiencies, we found that non-performing loan as undesirable output was the most influential factor. The annual average of inefficiencies of Korean banks was 0.3912, and it consisted of non-performing loan 0.1883, output factors 0.098 except non-performing loan, input factors 0.098. The annual average inefficiency went sharply up from 0.2995 to 0.4829 mainly due to the sharp increase of inefficiency of non-performing loan from 0.1088 to 0.2678 before and after 2007-2008 Global financial crisis. We empirically showed the non-performing loan needed to be considered since it was the most important factor among the influential factors of technical inefficiency such as manpower, total deposit, securities, and non-performing loan. This study had some limitation since we did not control financial environment factor in WRDDM.

• Environmental and Resource Economics Review
• /
• v.21 no.2
• /
• pp.211-235
• /
• 2012

This paper presents an alternative decomposition technique to identify the relative importance of factors associated with changes in $CO_2$ emissions by using directional distance function to model the joint production of desirable and undesirable outputs. The key feature of the proposed approach is the introduction of fossil and non-fossil fuel energy input efficiencies, productivity change and emission intensity change. For the 27 OECD countries as a whole, the empirical results indicate that economic growth is the most important contributor to $CO_2$ emissions increase, while efficiency change is the most important component to $CO_2$ emissions reduction between 1980 and 2007. For more extensive insights, this paper divided 3 groups according to the emission growth rate and find out that high emission countries show relatively low production efficiencies and technical changes contributing $CO_2$ emissions increase. The results also provide that more strict environmental regulations are needed to improve the pollution intensity in these countries.