• 기술사
• /
• 제15권1호
• /
• pp.7-13
• /
• 1982

지하통신용 케이블 보호용 관로로 사용되는 합성수지관의 안전수행문제는 점차 중요성이 인식되어지고 있어 이를 검토하기 위하여 유형별에 의한 역학적 실험을 실시하였다. 그 결과 본 연구에서는 매설 파이프가 받는 토압과 수압을 실험치와 이론치로 서로 비교하여 보았고 매설깊이 별에 의한 총압력을 계산하여 적정한 매설 보건을 추정하였으며 또한 재료 특성을 파악하여 충격효과 및 변형에 대한 두께와의 관계를 알았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.470-473
• /
• 2007

Geothermal heat exchanger(GHEX) is a major component of Geothermal heat pump system(GSHPs). In Common, We use the vertical type GHEX in Korea. But vertical type GHEX needs a high cost for installation, because of drilling the hole which has 200m depth at max. So, We suggest the use of horizontal type GHEX. When we construct buildins, We excavate the ground and we can install the horizontal type GHEX at the excavated underground. It's very cheap and convenient method compare to vertical type GHEX installation. This study is peformed to estimate the peformance of horizontal type GHEX and to analyze effects of heat exchanger types and undergroundwater. As the result, slinky type GHEX has a 66% efficiency compare to vertical type GHEX and mat type has a 201% efficiency at the undergroundwater zone.

• 터널과지하공간
• /
• 제6권4호
• /
• pp.287-297
• /
• 1996

Input data play an important role in numerical analyses. However, it is difficult to obtain appropriate data for many reasons. In order to overcome those difficulties, an automatic MPBX(Multi-Position Borehole Extensometer) monitoring system is developed. This system can be applied to the analyses of measured data which include evaluation of the stabiliyt, efficiency of construction and the validity of numerical analyses. At first, the MPBX among field measurement tools is considered in this study. Also, 3-dimension finite element analyses are carried out to verify the influence of geological conditions and excavation sequence on the MPBX displacement. The effect of geological conditons on the displacement can be estimated qualitatively qualitavely from the measured data by plotting displacement vs. depth.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.791-800
• /
• 2010

This paper presents the construction status and the conceptual designs of midium and high level radioactive waste disposal facilities from all around world. For the midium radioactive waste, a shallow disposal using trench or a deep depth disposal are adopted. However, these are rather focusing on the social and cultural point of view than the technical. Meanwhile, the high level radioactive waste is basically disposed in the deep underground. The corresponding ground conditions are usually dense and composed of sedimentary and crystalline rocks mainly with low permeability. A barrier system is made of canister which consists of copper, titanium, and tin. The inner and outer side of the canister are composed of different materials respectively.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.112-115
• /
• 2004

An analytical study is conducted using the Galerkin technique to determine the behaviour of thin fibre-reinforced composite pipes under soil pressure. Geometric nonlinearity and material linearity are assumed. It is assumed that the vertical and lateral soil pressures are proportional to the depth and the lateral displacement of the pipe respectively. It is also assumed that the radial shear stress is negligible because the ratio of the thickness to the radius of the pipe is very small. The calculation results are compared with the finite element analysis result.

• Nuclear Engineering and Technology
• /
• 제44권1호
• /
• pp.89-102
• /
• 2012

The buffer and backfill are important components of the engineered barrier system in a high-level waste repository, which should be constructed in a hard rock formation at a depth of several hundred meters below the ground surface. The primary function of the buffer and backfill is to seal the underground excavation as a preferred flow path for radionuclide migration from the deposited high-level waste. This study investigates the hydraulic conductivity and swelling pressure of Kyungju Ca-bentonite, which is the candidate material for the buffer and backfill in the Korean reference high-level waste disposal system. The factors that influence the hydraulic conductivity and swelling pressure of the buffer and backfill are analyzed. The factors considered are the dry density, the temperature, the sand content, the salinity and the organic carbon content. The possibility of deterioration in the sealing performance of the buffer and backfill is also assessed.

• 터널과지하공간
• /
• 제1권2호
• /
• pp.218-228
• /
• 1991

Natural stress measurements have been made at two sites at the depth of 280m from surface by means of stress relief overcoring methods using three directonal deformation gage. Attempts have been made to determine the state of natural stress in the rock and provide useful basic data to investigate the stress distribution and the determination of yield zone around powerhouse cavern. The magnitude and the direction of the miximum principal stress obstained from in-situ stress measurements is -96.1kgf/$\textrm{cm}^2$ and N38$^{\circ}$W, N35$^{\circ}$W respectively. Vertical stresses are in approximately agreement with the theoretical value. The ratio of measured to theoretical stresses are 85% at two sites. The ratio of average horizontal to vertical stresses(k=($\sigma$h)ave/$\sigma$v is 1.07.

• Geomechanics and Engineering
• /
• 제16권2호
• /
• pp.177-185
• /
• 2018

The subsidence mechanism of ground surface is a complex phenomenon when multiple seam coal mining operations are carried out. Particularly, the coal mining beneath karstic formations causes a very special form of subsidence. The subsidence causes elasto-plastic deformation of the karstic layers and the collapse of cavities leads to dolinization and/or sinkhole formation. In this study, a sinkhole with a depth of 90 m and a width of 25 m formed in Gelik district within the coal-basin of Zonguldak (NW, Turkey) induced by multiple seam coal mining operations in the past has been presented as a case-history together with two-dimensional numerical simulations and InSAR monitoring. The computational results proved that the sinkhole was formed as a result of severe yielding in the close vicinity of the faults in contact with karstic formation due to multiple seam longwall mining at different levels.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.61-69
• /
• 2008

The size of the construction projects become huge and complex, and the depth of excavation for the underground structures become deeper. Also the working area is not enough for loading materials and temporary facilities. This is the most case of recent construction projects in downtown area. Top-down is the most useful method for this kind of construction projects. Top-down construction method consists of supporting method, retaining wall type, foundation type and construction direction such as up-down or up-up. construction managers have to select sub-elements for top-down construction method in planning phase. This study is to suggest the sub-elements selection model for the top-down construction method, and the case study is conducted for evaluating this model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.315-317
• /
• 1999

Soil resistivity has a relation with the corrosion of underground buried structures as a water pipeline, gas pipeline and power cable casing. And it's a main factor in the cathodic protection and earth design. This paper presents soil resistivity maps each depth through measuring the soil resistivity in Kwachon, Kyonggi province. Also examines the soil resistivity characteristics on a change of temperature, moisture content and ion content in the laboratory.