• Nuclear Engineering and Technology
• /
• v.23 no.4
• /
• pp.420-425
• /
• 1991

The Rb charge exchange cell is constructed as the He- ion source of the SNU 1.5- MV Tandem Van do Graaff accelerator. The characteristic experiment is carried out in order to determine the optimum operational conditions of the cell. The $He^{+}$ ion beam with the energy of 1~10 keV, extracted from the duoplasmatron ion source, is passed through the Rb vapor to become He- ions by the two step charge exchange reaction, i.e., $He^{+}\;+\;Rb\;{\rightarrow}\;He^{\circ\ast}\;+\;Rb^{+}\;and\;He^{\circ\ast}\;+\;Rb\;{\rightarrow}\;He^{-}\;+\;Rb^{+}$. From the experimental results, it is found that the maximum fractional yield of $He^{-}$ ions is produced at He+ ion energy of 7 keV. The optimum temperatures of the oven and the canal are determined to be $370\;^{\circ}C{\;}and{\;}95^{\circ}C$ respectively. Under the optimum operational condition the maximum fractional yield of $He^{-}$ ions is $2.42\pm0.02%$ This charge exchange cell is proved to be an effective system for the production of He- ions.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1964-1969
• /
• 2019

The safety and efficiency of nuclear reactors largely depend on the monitoring and control of nuclear radiation. Due to the unique nuclear-physical characteristics, Hf is one of the most promising materials for the manufacturing of the control rods and the emitters of neutron detectors. It is proposed to use the Compton neutron detector with the emitter made of Hf in the In-core Instrumentation System (ICIS) for monitoring the neutron field. The main advantages of such a detector in comparison the conventional β-emission sensors are the possibility of reaching of a higher cumulative radiation dose and the absence of signal delays. The response time of the detection is extremely important when a nuclear reactor is operating near its critical operational parameters. Taking Hf as an example, the general principles for calculating the chains of materials transformation under neutron irradiation are reported. The influence of ^179m1Hf on the Hf composition changing dynamics and the process of transmutants' (Ta, W) generation were determined. The effect of these processes on the absorbing properties of Hf, which inevitably predetermine the lifetime of the detector and its ability to generate a signal, is estimated.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.47-51
• /
• 2010

A powder, containing 80 percent of blue cobalt aluminate $(CoAl_2O_4)$ crystallites, was synthesized at $210 ^{\circ}C$ using a (metal nitrate-malonic acid-ammonium hydroxide-ammonium nitrate) system. The optimal amount of concentrated ammonia water and initial decomposition temperature were determined for the blue $CoAl_2O_4$ crystallites preparation. Three $CoAl_2O_4$ precursor pastes, corresponding to the various amounts of concentrated ammonia water, were prepared by evaporating the initial solutions in an electric furnace fixed at $80 ^{\circ}C$ under a vacuum of 25 torr. The initial solution was used to dissolve the starting materials. The powder with the maximum content (80%) of blue $CoAl_2O_4$ crystallites was prepared when the prepared precursor was decomposed at $210 ^{\circ}C$. The blue $CoAl_2O_4$ crystallite content in the prepared sample decreased with increasing initial decomposition temperature. For 0.2 mole of the $Al^{3+}$ ion, the chemical compositions of the precursor corresponded to molar ratios of 0.4, 1.40, 2.56 and 2.00 for the $Co^{2+}$ ion, malonic acid, ammonia and ammonium nitrate per mole of the $Al^{3+}$ ion, respectively. The blue $CoAl_2O_4$ crystallite content in the sample decreased with the amount of ammonia deviated from the optimal value. The characteristics of the powders were examined using X-ray diffraction, optical microscopy, Fourier transformation infrared spectroscopy and the Brunauer-Emmett-Teller technique.

• Journal of Ginseng Research
• /
• v.40 no.4
• /
• pp.453-461
• /
• 2016

Background: This study aims to describe the characterization of Paenibacillus polymyxa GBR-1 (GBR-1) with respect to its positive and negative effects on plants. Methods: The morphological characteristics of GBR-1 were identified with microscopy, and subjected to Biolog analysis for identification. Bacterial population and media optimization were determined by a growth curve. The potential for GBR-1 as a growth promoting agent, to have antagonistic activity, and to have hydrolytic activity at different temperatures was assessed. The coinoculation of GBR-1 with other microorganisms and its pathogenicity on various stored plants, including ginseng, were assessed. Results: Colony morphology, endospore-bearing cells, and cell division of GBR-1 were identified by microscopy; identification was performed by utilizing the Biolog system, gas chromatography of fatty acid methyl esters (GC-FAME). GBR-1 showed the strongest antagonistic activity against fungal and bacterial pathogens. GBR-1 cell numbers were relatively higher when the cells were cultured in brain heart infusion (BHI) medium when compared with other media. Furthermore, the starch-hydrolytic activity was influenced by GBR-1 at higher temperature compared to low temperatures. GBR-1 was pathogenic to some of the storage plants. Coinoculation of GBR-1 with other pathogens causes differences in rotting on ginseng roots. A significant growth promotion was observed in tobacco seedlings treated with GBR-1 suspensions under in vitro conditions, suggesting that its volatile organic compounds (VOCs) might play a role in growth promotion. Conclusion: The results of this study indicate that GBR-1 has both positive and negative effects on ginseng root and other stored plants as a potential biocontrol agent and eliciting in vitro growth promotion.

• Journal of Ginseng Research
• /
• v.44 no.4
• /
• pp.563-569
• /
• 2020

Background: White ginseng consists of the roots and rhizomes of the Panax species, and red ginseng is made by steaming and drying white ginseng. While red ginseng has both polar and nonpolar ginsenosides, previous studies showed white ginseng to have only polar ginsenosides. Because nonpolar ginsenosides are formed through the manufacture of red ginseng from white ginseng, researchers have generally thought that nonpolar ginsenosides do not exist in white ginseng. Methods: We developed a simultaneous quantitative method for six nonpolar ginsenosides in white ginseng using reverse-phase high-performance liquid chromatography coupled with integrated pulsed amperometric detection. The nonpolar ginsenosides of white ginseng were extracted for 4 h under reflux with 50% methanol. Results: Using the gradient elution system, all target components were completely separated within 50 min. Nonpolar ginsenosides were determined in the rhizome head (RH), main root (MR), lateral root, and hairy root (HR) of 6-year-old white ginseng samples obtained from several regions (Geumsan, Punggi, and Kanghwa). The total content in the HR of white ginseng was 37.8-56.8% of that in the HR of red ginseng. The total content in the MR of white ginseng was 5.9-24.3% of that in the MR of red ginseng. In addition, the total content in the RH of white ginseng was 28.5-35.8% of that in the HR of red ginseng Conclusion: It was confirmed that nonpolar ginsenosides known to be specific components of red ginseng were present at substantial concentrations in the HR or RH of white ginseng.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.228-236
• /
• 2016

Extraordinarily the establishment of towing tank has been initiated after the allocation of space at the basement floor of existing building through remodeling procedure. Therefore the asymmetric tank should be unavoidably determined by compromising with the allowable space and existing building structure. Consequently the shape of towing carriage ought to be selected as a cantilever type to match with the given environmental conditions. Finally the major role of the towing tank has been configured on the fundamental research work for the high speed marine vehicles. Due to the limited length of towing tank, it is appeared that the carriage should accelerated with 1.2m/sec² which is equivalent to twice of the maximum acceleration in ordinary practices on design application of carriage. In such a condition the exerted total power of motor could not be converted to traction force of the carriage without slip for the acceleration. To overcome these difficulties the contact pressure of a horizontal traction wheel to rail has been reinforced by the elastic recovery force of springs on supporting rollers. It is believed that the design experience of the high speed towing carriage under unusual circumferential condition and acceleration barrier could be utilized not only on the design of high speed towing carriage but also on the improvement of existing facilities.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.10
• /
• pp.1463-1470
• /
• 2010

E. coli has long been widely used as a host system for the manufacture of recombinant proteins intended for human therapeutic use. When considering the impurities to be eliminated during the downstream process, residual host cell DNA is a major safety concern. The presence of residual E. coli host cell DNA in the final products is typically determined using a conventional slot blot hybridization assay or total DNA Threshold assay. However, both the former and latter methods are time consuming, expensive, and relatively insensitive. This study thus attempted to develop a more sensitive real-time PCR assay for the specific detection of residual E. coli DNA. This novel method was then compared with the slot blot hybridization assay and total DNA Threshold assay in order to determine its effectiveness and overall capabilities. The novel approach involved the selection of a specific primer pair for amplification of the E. coli 16S rRNA gene in an effort to improve sensitivity, whereas the E. coli host cell DNA quantification took place through the use of SYBR Green I. The detection limit of the real-time PCR assay, under these optimized conditions, was calculated to be 0.042 pg genomic DNA, which was much higher than those of both the slot blot hybridization assay and total DNA Threshold assay, where the detection limits were 2.42 and 3.73 pg genomic DNA, respectively. Hence, the real-time PCR assay can be said to be more reproducible, more accurate, and more precise than either the slot blot hybridization assay or total DNA Threshold assay. The real-time PCR assay may thus be a promising new tool for the quantitative detection and clearance validation of residual E. coli host cell DNA during the manufacturingprocess for recombinant therapeutics.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.770-775
• /
• 2006

Biofilters packed with various materials commonly show problems such as low performance and clogging in a long-term operation. Recently, a bioactive foam reactor(BFR) using surfactants has been suggested to ensure efficient and stable VOCs removal performance. This study was mainly conducted to investigate the feasibility of the BFR system using styrene as a model compound. An abiotic md a biotic tests were conducted to estimate a mass transfer coefficient($K_La$) and a specific substrate utilization coefficient(k) for the BFR, showing the rate of mass transfer was greater in the BFR than in other diffuser systems. A dynamic loading test also indicated that the performance of the BFR was stable under a shock loading condition. Furthermore, the maximum elimination capacity of the BFR was determined to be 109 $g/m^3/hr$ for styrene, which was much higher than those for biofilter systems generally reported in the literature. Overall, the experimental results suggest that the BFR be a potential alternative to the conventional packed-bed biofilters.

• Journal of Arbitration Studies
• /
• v.23 no.2
• /
• pp.81-113
• /
• 2013

The World Trade Organization (WTO) offers remedies for non-compliance by the introduction of compensation or retaliation in the Dispute Settlement Understanding (DSU). There are no the provisions under the WTO DSU and it seems unclear what retaliation is attempting to achieve. Therefore, it is unclear whether the goal of WTO retaliation is to induce compliance or to restore the balance between the rights and the obligations of WTO members. It has been claimed the WTO has a strong dispute settlement system by providing retaliation when the recommendations and rulings of Dispute Settlement Body (DSB) are not complied with. But this seems to be inadequate to bring about effective and timely compliance. Especially there is a problem with free riding by a violating member because the level of retaliation is determined from the expiration of a reasonable period of time, providing an incentive to delay compliance. Also the level of the suspension of concessions or other obligations authorized by the DSB is equivalent to the level of nullification or impairment, according to DSU Article 22.4. However, if the member concerned objections to the level of the suspension proposed, the matter shall be referred to arbitration. The arbitrator shall not examine the nature of the suspension of concessions or other obligations to be suspended but shall determine whether the level of such suspension is equivalent to the nullification or impairment. The arbitrator makes an assessment standard of equivalence by comparing the suspension of concessions or other obligations and the nullification or impairment calculated in terms of the amount of trade. But it is necessary that other standards replace the quantitative standards when the level of the nullification or impairment cannot be quantified by concrete damages.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.8
• /
• pp.119-125
• /
• 2010

This paper proposes a new solution about physical problem of autonomous mobile robots system using ultrasonic sensors. An mobile robot uses several sensors for recognition of its circumstance. However, such sensor data are not accurate all the time. A means of removing the noise that sensor data contains constantly, It is possible for simulation to estimate its circumstance based on ultrasonic sensor data by learning algorithm SVR(Support Vector Regression). To use SVR, it is being selected parameter and kernel which are the component of SVR. Selecting the component of SVR, the most accurate parameter data was selected through the tests because it is not existed determined data. In addition, choosing the kernel uses RBF(Radial Basis Function) kernel which is the most generalized. This paper proposes SVR based algorithm to compensate for the above demerits of ultrasonic sensor through the experimentation under three different environments.