• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.393-400
• /
• 2014

Structures are often subject to vehicle collision which can be accidental or terrorist attack. Previous research shows that the damage in major columns may result in progressive collapse of a whole building. This study investigates the performance of a steel column standing on a reinforced concrete footing subjected to a vehicle collision. The size and the axial load of the steel column are determined based on the assumption that it is the first story corner column in a typical three-story building with six meter span length. The finite element model of a eight-ton single unit truck provided by the NCAC (National Crash Analysis Center) is used in the numerical analysis. The finite element analysis is performed using the LS-DYNA, and the results show that the behavior of the column subjected to car impact depends largely on the column-foundation connection detail.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.3
• /
• pp.194-204
• /
• 2016

Floating ring seals offer an opportunity to reduce leakage flows significantly in rotating machinery. Accordingly, they have been applied successfully to rotating machinery within the last several decades. For rocket turbopump applications, fundamental behavior and design philosophy have been revealed. However, further work is needed to explore the rotordynamic characteristics associated with rotor vibrations. In this study, rotordynamic forces for floating ring seals under rotor's whirling motions are calculated to elucidate rotordynamic characteristics. Comparisons between numerical simulation results and experiments demonstrated in our previous report are carried out. The three-dimensional Reynolds equation is solved by the finite-difference method to calculate hydrodynamic pressure distributions and the leakage flow rate. The entrance loss at the upstream inlet of the seal ring is calculated to estimate the Lomakin effect. The friction force at the secondary seal surface is also considered. Numerical simulation results showed that the rotordynamic forces of this type of floating ring seal are determined mainly by the friction force at the secondary seal surface. The seal ring is positioned almost concentrically relative to the rotor by the Lomakin effect. Numerical simulations agree quite well with the experimental results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.455-465
• /
• 2006

In this study, the effect of scour was evaluated by regional and geotechnical characteristics and back data were accumulate for the design against scour through the local erosion characteristics evaluation of the Inchon coast. The erosion characteristics for the undisturbed soil samples collected near the main locations at the Incheon 2nd bridge, the Hwangyeong bridge, and a coast road in Songdo, are determined quantitatively through the scour rate tests. On the basic soil properties test, the bed around the Inchon coast chiefly consists of fined grained soils, and the soil samples were classified as silty clay(ML) or clay(CL) under the Unified Soil Classification System. On the scour rate test, the critical shear stress increases when the undrained shear strength increases as of the general trend of fine grained soils, and the average scour rate for the maximum velocity by 100 year flood is 173mm/hr at the Incheon 2nd bridge, 67mm/hr at the Hwangyeong bridge and 10mm/hr at a coast road in Songdo, respectively. Comparing to the scour rate of coarse grained soil, that of the bed around the Inchon coast is turned out to be very low. Therefore, the relative ability of the bed around the Inchon coast to resist erosion is assumed to be very high.

• Composites Research
• /
• v.15 no.6
• /
• pp.8-15
• /
• 2002

In this work, the effect of biodegradable poly(butylene succinate)(PBS) in difunctional epoxy(21:P) resin was investigated in terms of rheological properties, cure kinetics, thermal stabilities, and mechanical interfacial properties. Rheological properties of the blend system were measured under isothermal condition using a rheometer. Cross-linking activation energies($\textrm{E}_c$) were determined from the Arrhenius equation based on gel time and curing temperature. The $\textrm{E}_c$ was increased in the presence of 10 wt% PBS as compared with neat 2EP. From the DSC results of the blends, the cure activation energies($\textrm{E}_a$) showed a similar behavior with $\textrm{E}_c$ due to the increased intermolecular interaction between 2EP and PBS. The decomposed activation energies($\textrm{E}_t$) for the thermal stability derived from the integral method of Horowitz-Metzger equation, were also increased in 10 wt% PBS. In addition, 20 wt% PBS showed the highest critical stress intensity factor($\textrm{E}_{IC}$). which was explained by increasing the fracture toughness of the 2EP/PBS blend systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.911-917
• /
• 2010

In this study, we performed structural and fatigue analyses of the engine exhaust manifold that was subjected to thermo-mechanical cyclic loading. The methodologies used in this study are based on an approach in which the techniques for modeling the exhaust system, the temperature-dependent properties of the material, and thermal cyclic loading are taken into consideration and a reliable strategy is adopted for failure prediction. An application example shows that at an elevated temperature, considerable compressive plastic deformation is observed and that at a low temperature, tensile stresses remain in those parts of the test exhaust manifold where failure is observed. In order to predict fatigue life, mechanical damage is determined on the basis of the stress.strain hysteresis loops by using the classical Coffin.Manson equation and by adopting a method in which the dissipated plastic energy is taken into consideration.

• Asian Journal of Turfgrass Science
• /
• v.3 no.2
• /
• pp.77-82
• /
• 1989

This experiment was carried out to determine the value of turfgrass clippings as a source of protein for animal feed. Levels of crude protein(CP) and in vitro dry matter digestibility(JVDMD) were determined for Korean lawngrass (Zoysia Japonica Steud.) under three levels of nitrogen fertilizer ( 0 , 350 and 700kg ha year and three levels of mowing interval between cuts (lO, 20, and 30 days). Sampling was done on the three-year old turffield on which nitrogen and mowing treatments were Imposed. Clippings were collected after mowing, and CP levels were calculated from a measurement of total N(CP = N >< 6.25) l)y Auto-analyser system-2 procedure and IVDMD by Maeng's method which was partly modified with Tilley and Terry's procedure. With the increased nitrogen legime the CP content of leaf clippings varied from 6.6 to 13.6% and that Of stem clippings from 4 to 10.3%. The CP levels of clippings were directly proportional to the N fertilization rate. The highest CP content was recorded in early July when it was 14.1% at 35OkgN ha -and I 18.l%kgN ha-1 with 10-wcek mowing interval. Mowing interval had little effect on the CP content in both leaf and stem clippings. The level of IVDMD in the Korean lawngrass clippings varied with mowing interval. The highest level measured was 47%, hut this varied during the growing season and occurred in the following order : early summer > summer > fall. This experiment has shown that Korean lawngrass clippings can he helpful source of protein for use in some animal feeds and that a high concentration of CP can occur depending upon N fertllizer and that of I VDM I) upon mowing practices.

• Smart Structures and Systems
• /
• v.26 no.1
• /
• pp.89-102
• /
• 2020

Shape memory alloy (SMA)-based Superelasticity-assisted Slider (SSS) is proposed as an engineering solution to practically exploit the well-accepted advantages of both sliding isolation and SMA-based recentering. Self-centering capability in SSS is provided by austenitic SMA cables (or wire ropes), recently attracting a lot of interest and attention in earthquake engineering and seismic isolation. The cables are arranged in various novel and conventional configurations to make SSS versatile for aseismic design and retrofit of structures. All the configurations are detailed with thorough technical drawings. It is shown that SSS is applicable without the need for Isolation Units (IUs). IUs, at the same time, are devised for industrialized applications. The proof-of-concept study is carried out through the examination of mechanical behavior in all the alternative configurations. Force-displacement relations are determined. Isolation capabilities are predicted based on the decreases in seismic demands, estimated by the increases in effective periods and equivalent damping ratios. Restoring forces normalized relative to resisting forces are assessed as the criteria for self-centering capabilities. Lengths of SMA cables required in each configuration are calculated to assess the cost and practicality. Practical implementation is realized by setting up a small-scale IU. The effectiveness of SSS under seismic actions is evaluated using an innovative computer model and compared to those of well-known Isolation Systems (ISs) protecting a reference building. Comparisons show that SSS seems to be an effective IS and suitable for earthquake protection of both structural and non-structural elements. Further research aimed at additional validation of the system are outlined.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.138-149
• /
• 2016

Quality function deployment (QFD) is a widely adopted customer-oriented product development methodology by translating customer requirements (CRs) into technical attributes (TAs), and subsequently into parts characteristics, process plans, and manufacturing operations. A main activity in QFD planning process is the determination of the target levels of TAs of a product so as to achieve a high level of customer satisfaction using the data or information included in the houses of quality (HoQ). Gathering the information or data for a HoQ may involve various inputs in the form of linguistic data which are inherently vague, or human perception, judgement and evaluation for the information and data. This research focuses on how to deal with this kind of impreciseness in QFD optimization. In this paper, it is assumed as more realistic situation that the values of TAs are taken as discrete, which means each TA has a few alternatives, as well as the customer satisfaction level acquired by each alternative of TAs and related cost are determined based on subjective or imprecise information and/or data. To handle these imprecise information and/or data, an approach using some basic definitions of fuzzy sets and the signed distance method for ranking fuzzy numbers is proposed. An example of a washing machine under two-segment market is provided for illustrating the proposed approach, and in this example, the difference between the optimal solution from the fuzzy model and that from the crisp model is compared as well as the advantage of using the fuzzy model is drawn.

• Toxicological Research
• /
• v.20 no.1
• /
• pp.43-47
• /
• 2004

In order to investigate the safety of a water extract (ADP) of 1 : 1 mixture of Anemarrhena rhizoma and Phellodendron cortex for alleviating benign prostate hyperplasia, genotoxicity studies in bacterial and mammalian cell assay systems, namely, the Ames bacterial reverse mutation and chromosomal aberration assays were performed. As shown by the results of the Ames bacterial reversion assay, ADP in the range of 625-5000 $\mu\textrm{g}$/plate did not induce mutagenicity in Salmonella typhimurium TA 98, TA 100, TA 1535 and TA 1537 strains in the absence or in the presence of S9 (the microsomal fraction of rat liver homogenate) metabolic activation. The $IC_{50}$ (50% cell growth inhibition concentration) values of ADP for the chromosomal aberration assay were determined; these were 2425 $\mu\textrm{g}$/ml in the absence and 8126 $\mu\textrm{g}$/ml in the presence of S9 metabolic activation in Chinese hamster lung (CHL) fibroblast cell culture. No chromosomal aberration was observed in CHL cells treated with ADP at 2425, 1212.5 and 606.25 $\mu\textrm{g}$/ml in the absence, or at 8126, 4063 and 2031.5 $\mu\textrm{g}$/ml in the presence of S9 metabolic activation. These results show that under the conditions used, ADP does not harmfully affect the bacterial or mammalian cell system at the gene level.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.643-654
• /
• 2006

Thispaper presents the results of an experimental investigation into the fire performances ofsimply supported iTECH composite beams using an ISO834 standard fire. There are very few independent studies on the fire resistance of composite steel and concrete structures of various designs. The iTECH composite beam system has been used in construction, but nothing is known about its influence in a fire. To evaluate the fire resistance performanceof the iTECH beam, a test was conducted for 4.7m-span-length iTECH beams under given conditions in a laboratory. The fire resistance performance of unprotected coatings of the iTECH beam has been examined, and a longer period of fire resistance was achieved by increasing the beam coating's section size and decreasing its load ratio. Coatings for the fire protection of iTECH beams reduce the rate of temperature rise of the beam in case of fire, and the required thickness of spray-on fire protection coatings can be determined by means of tests.