• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.118-120
• /
• 2000

Currently, x-ray is mostly used for the diagnosis of dental cavity and osteoporosis. The osteoporosis is broadly defined as a decrease in the amount of bone mass per unit volume of the bone. Clinically the manifestation of low bone mass presents a clinical problem to the general population as an increase in fracture risk and especially in aging population[1]. Although the amount of the irradiated x-ray to the human body for the clinical diagnosis is relatively small, the exposition of the x-ray to the human body should be minimized as much as possible, since the x-ray is an ionizing radiation. To investigate other possible systems replacing X-ray, ultrasonic imaging and MRI(Magneto-Resonance-Imaging) systems were studied. Unfortunately, an effective and safe diagnosis tool for detecting the dental cavity and the osteoporosis is currently lacking. (omitted)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.573-584
• /
• 2012

Breast and prostate tumors or cancers tend to be stiffer than the surrounding normal tissue. However, the difference in echogenicity between cancerous and normal tissues is not clearly distinguishable in ultrasound B-mode imaging. Thus, imaging the stiffness contrast between the two different tissue types helps to diagnose lesions quantitatively, and such a method of imaging the elasticity of human tissue is termed ultrasound elasticity imaging. Recently, elasticity imaging has become an effective complementary diagnostic modality along with ultrasound B-mode imaging. This paper presents various elasticity imaging methods that have been reported up to now and describes their characteristics and principles of operation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.119-127
• /
• 2014

An epoxy coating applied to the concrete surface of a containment building deteriorates in hazardous environments such as those containing radiation, heat, and moisture. Unlike metals, the epoxy coating on a concrete liner absorbs and discharges moisture during the degradations process, so it has a different density and volume during service. In this study, acoustic impedance was adopted for characterizing the degradation of a glass-reinforced epoxy coating using the acoustic reflection coefficient (reflectance) on a rough epoxy coating. For estimating the acoustic reflectance on a wavy epoxy coating surface, a probabilistic model was developed to represent the multiple irregular reflections of the acoustic wave from the wavy surface on the basis of the simulated annealing technique. A number of epoxy-coated concrete specimens were prepared and exposed to accelerated aging conditions to induce an artificial aging degradation in them. The acoustic impedance of the degraded epoxy coating was estimated successfully by minimizing the error between a waveform calculated from the mathematical model and a waveform measured from the surface of the rough coating.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.241-245
• /
• 2000

In this case report, I discussed the diagnosis and treatment of two pregnant women with temporomandibular disorders(TMD) who visited the Department of Oral Medicine, PNUH. Also, I reviewed some investigations of diagnosis and treatment of TMD in pregnant women. The obtained results were as follows; 1. No single X-ray diagnostic procedure for TMD results in radiation dose that threatens the well-being of the developing embryo and fetus. 2. Most non-steroidal anti-inflammatory drugs(NSAIDs) have commonly used because these drugs are considered to be nonteratogenic, but these agents are not recommended for routine use after 3rd trimester. 3. Electro-acupuncture stimulation therapy(EAST) is contraindicated for 1st trimester, and ultrasonic deep heat therapy, microwave deep heat therapy, low level laser therapy, myo-monitor are not contraindicated for pregnant women but clinician must consider some risk of adverse fetal effects. 4. The occlusal stabilization splint may be used for pregnant women, if it is fabricated indirectly. 5. Surgical treatment is contraindicated for pregnant women.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.122-125
• /
• 2004

In radiotherapy of tumors in liver, enough planning target volume (PTV) margins are necessary to compensate breathing-related movement of tumor volumes. To overcome the problems, this study aims to obtain patients' body movements by using a moving phantom and an ultrasonic sensor, and to develop respiration gating techniques that can adjust patients' beds by using reversed values of the data obtained. The phantom made to measure patients' body movements is composed of a microprocessor (BS II, 20 MHz, 8K Byte), a sensor (Ultra-Sonic, range 3 cm ${\sim}$3 m), host computer (RS232C) and stepping motor (torque 2.3Kg) etc., and the program to control and operate it was developed. The program allows the phantom to move within the maximum range of 2 cm, its movements and corrections to take place in order, and x, y and z to move successively. After the moving phantom was adjusted by entering random movement data(three dimensional data form with distance of 2cm), and the phantom movements were acquired using the ultra sonic sensor, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using guinea pigs, the real-time respiration gating techniques were drawn by operating the phantom with the reversed values of the data. The result of analyzing the acquisition-correction delay time for the three types of data values and about each value separately shows that the data values coincided with one another within 1% and that the acquisition-correction delay time was obtained real-time (2.34 ${\times}$ 10$^{-4}$sec). This study successfully confirms the clinic application possibility of respiration gating techniques by using a moving phantom and an ultra sonic sensor. With ongoing development of additional analysis system, which can be used in real-time set-up reproducibility analysis, it may be beneficially used in radiotherapy of moving tumors.

• Clean Technology
• /
• v.19 no.3
• /
• pp.264-271
• /
• 2013

In this study, we optimized the removal condition of contaminants attached on the scrap surface to recycle the scrap generated from the Zr alloy tube manufacturing process back to the nuclear grade. The main contaminant is remnant of watersoluble cooling lubricant that is used in the pilgering manufacture during the tube production, and it is assumed to be compressed and carbonized on the surface of tube. Zirlo alloy tube of ${\phi}9.50mm$, which has high occurrence frequency of scrap, was selected as the object to be cleaned, and cleaning abilities of reagents were evaluated by measuring the characteristics of contaminants remained and by analyzing the surface of the tube after cleaning process. For evaluation of each cleaning agent, we selected two types of sodium hydroxide series and three types of potassium hydroxide series. Furthermore, to confirm dependence on tempe-rature and ultrasonic intensities, cleaning at the room temperature, $40^{\circ}C$, and $60^{\circ}C$ was conducted, and results showed that higher the cleaning temperature and higher the ultrasonic intensity, better the cleaning effect. As a result of the bare-eye inspection, while the use of sodium hydroxide provided satisfactory condition on the tube surface, the use of potassium hydroxide series provided satisfactory condition on the tube surface only when the ultrasonic intensity was over 120 W. In the cleaning effect analysis using the gravimetric method, cleaning efficiency of sodium hydroxide series was as high as 97.6% ($60^{\circ}C$, 120 W), but since the tube surface condition was poor after the use of potassium hydroxide, the gravimetric method was not appropriate. In the analytical result of surface contaminants on the tube surface, C, O, Ca, and Zr were detected, and mainly C and O dominated the proportion of contaminants. It was also found that the degree of cleaning on the tube affected the componential ratio of C and O; if the degree of cleaning is high, or if cleaning is well-conducted, the proportion of C is decreased, and the proportion of O is increased. Based on these results, optimal cleaning for application in the industry can be expected by categorizing cleaning process into three steps of Alkali cleaning, Rinsing, and Drying and by adjusting cleaning parameters in each step.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.504-509
• /
• 2016

Defects in dissimilar metal welds are reported to be on the increase during the operating lifespan and aging of nuclear power plants. In Korea, reported cases of defects due to dissimilar metal welds include the drain nozzle of a steam generator and RCS hot tube sampling nozzles. Therefore, there is an urgent need to develop a reliable automated nondestructive inspection technique and a system for the inspection of dissimilar metal welds of small diameter nozzles in a high radiation area of a nuclear power plant. In this study, to ensure effective defect inspection of small diameter nozzles (RCS high-temperature tube sampling nozzle) of a nuclear power plant, three different methods were developed. These include: (1) optimum inspection probe design by beam simulation, (2) multi-directions UT optimum inspection technique for the inspection of small diameters of different welded parts, and (3) remote control automatic inspection system. The developed technique and systems have been verified to be suitable for use in the inspection of defects in smaller diameter nozzles in nuclear power plants.

• Journal of Korean society of Dental Hygiene
• /
• v.5 no.1
• /
• pp.1-13
• /
• 2005

The study aimed to estimate the importance of job tasks, job training requirement and work satisfaction felt by dental hygienists to help dental hygienists work efficiently and effectively. A total of 142 dental hygienists working in dental hospitals located in J participated in the study. A SPSS 10.10 for Windows was used for statistical analysis. The statistical significance was defined as ${\alpha}$=.05. The results of the study are summarized as follows: 1. The mean score for the importance of job tasks was 4.09. The respondents considered dental clinic management and assistance to dentists the most important among their job descriptions showing the mean score of 4.44. The need for job training was 4.15 in average. The respondents wanted to have training on how to make a dental health insurance claim to receive payment other than any training with the mean score of 4.42. The work satisfaction of the respondents was 3.65 in average. The respondents were most satisfied with their work in dental assistance. 2. By the category of job tasks, the levels of importance of job tasks, job training requirement and work satisfaction were higher in plague removal with an ultrasonic scaler related to clinical oral prophylaxis, pit and fissure sealants related to preventive dental treatment and instruction in the correct usage of toothbrush related to public dental health education 3. In dealing with dental radiation machines, the radiation protection was considered the most important. While the training for periapical radiography was most needed, the respondents were satisfied with working in the same area. The levels of job importance, training requirement and work satisfaction were high in preventive dental care in the community performed in relation to the public dental health care. 4. In the dental health insurance claim category, the levels of importance of job task, training requirement and work satisfaction were higher in insurance claiming. The levels of job importance and training requirement were high in dental clinic management and assistance to dentists performed for preventive dental treatment. The work satisfaction was higher in maintaining medical chart records. The levels of job importance, training requirement and work satisfaction were higher in dental assistance in relation to dental protection. 5. There was significant relationship between the level of importance and work experience. Those with a longer period of work experience had higher levels of job importance in dental health insurance claim, dental clinic management and assistance to dentists and the overall task(pE0.05). 6. A significant relationship was observed between the need for job training in dental cleaning and preventive dental treatment and work experience. Those with more than 8 years of work experience demonstrated that job training is most needed(pE0.05). 7. The work satisfaction level was higher in the group with more than 8 years of work experience, compared with those in other work experience periods(pE0.05). 8. A positive correlation was seen between the level of importance and the need for job training among three variables.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.3
• /
• pp.309-314
• /
• 1994

Liposarcoma is one of the most common malignant mesenchymal neoplasm, comprising approximately 15% of all soft tissue sarcoma. This is a tumor with an incidence peak between age 40 and 60 years, and is slightly more common in men than women. Although all body region may be involved, the most frequent sites are lower extremities and retroperitoneum but rare in the head and neck region. Liposarcoma can be classified to four subtypes ; myxoid, well-differentiated, round-cell, pleomorphic. The myxoid type is the most common and accounts for almost one half of all liposarcoma. Wide surgical excision with or without radiation therapy has been used to manage this lesion. We report a case of 50-year old man with soft tissue swelling on the left cheek, previously diagnosed as myxoid liposarcoma in the left lower extremity. After radiologic and ultrasonic study and surgical excision with biopsy, the lesion of cheek was diagnosed as myxoid liposarcoma with round cell differentiation.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.2
• /
• pp.68-71
• /
• 2006

Active thermography has been used for several years in the field of remote non-destructive testing. It provides thermal images for remote detection and imaging of damages. Also, it is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. For energy deposition, it use external heat sources (e.g., halogen lamp or convective heating) or internal heat generation (e.g., microwaves, eddy current, or elastic wave). Among the external heat sources, the ultrasound is generally used for energy deposition because of defect selective heating up. The heat source generating a thermal wave is provided by the defect itself due to the attenuation of amplitude modulated ultrasound. A defect causes locally enhanced losses and consequently selective heating up. Therefore amplitude modulation of the injected ultrasonic wave turns a defect into a thermal wave transmitter whose signal is detected at the surface by thermal infrared camera. This way ultrasound thermography(UT) allows for selective defect detection which enhances the probability of defect detection in the presence of complicated intact structures. In this paper the applicability of UT for fast defect detection is described. Examples are presented showing the detection of defects in PCB material. Measurements are performed on various kinds of typical defects in PCB materials (both Cu metal and non-metal epoxy). The obtained thermal image reveals area of defect in row of thick epoxy material and PCB.