• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.97-101
• /
• 2007

We have developed a Edge Position Controller (EPC) using a ultrasonic sensor and applied to a fabric machine as a web guide system. Hardware devices composed of a ultrasonic transmitter-receiver sensor module and microprocessor-based sensor signal processing system are developed to realize the proposed system. We evaluated the control characteristics of the EPC and the performance of the system was good enough to apply the actual system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.956-961
• /
• 2007

We propose a new distance measurement method and local positioning system for the autonomous mobile robots localization. The distance measurement method is able to measure long-range distances with a high accuracy by using ultrasonic sensors. The time of flight of the ultrasonic waves include various noises is calculated accurately by the proposed period detecting method. The proposed local positioning system is composed of four ultrasonic transmitters and one ultrasonic receiver. The ultrasonic transmitter and receiver are separated but they are synchronized by RF (Radio frequency) signal. The proposed system using ultrasonic waves is represented as USAT(Ultrasonic Satellite System). USAT is able to estimate the position using the least square estimation. The experimental results show that the proposed local positioning system enables to estimate the absolute position precisely.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1847-1852
• /
• 2003

Ultrasonic motors have many excellent performances. A variety of ultrasonic motors has been developed and used as an actuator in motion control systems. However, this motor has nonlinear characteristics. Therefore, it is difficult to achieve the precise position control system incorporating with the ultrasonic motor. This paper describes a position control scheme for traveling-wave type ultrasonic motor using a pseudo-derivative control with feedforward gains (PDFF) controller designed by the coefficient diagram method (CDM). The PDFF control system satisfies both the tracking and regulation performances, which are the most important for the precise position control system. The CDM is shown to be an efficient and simple method to design the parameters of PDFF controller. The effectiveness of the proposed control system is demonstrated by experiments.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.253-261
• /
• 2004

The machining technology for the brittle materials such as ceramics are applied to the fields of MEMS(micro electromechanical system) by the progress of new machining technologies such as Etching, Diamond machining, Micro drilling, EDM(Electro discharge machining), ECDM(Electro discharge machining), USM(Ultrasonic machining), LBM(Laser beam machining), EBM(Electron beam machining). Especially, the USM technology can be applied to the dieletric brittle materials such as silicon, borosilicate glass, silicon nitride, quartz and ceramics with high aspect ratio. The micro machining system with machining force controlled position servo is developed in this paper and the optimized ultrasonic machining algorithm is constructed by the force controlled position servo control. The load cell is adapted in the force measuring and the servo control algorithm, suit for the ultrasonic machining characteristics, is estabilished with using the PID auto-tunning functions at the PMAC system which is generally adapted in the field of robot industries. The precision force signal amplifier is constructed with high precision operational amplifier AD524. The vacuum adsorption chuck which is made of titanum and internal flow line is engraved, is used in the workpiece fixing. The mahining results by USM shows that there are some deviation between the force command and the actual machining force that the servo control algorithm should be applied in the machining procedures. Therefore, the constant force controlled position servo system is developed for the micro USM system and by the examination machining process in USM, the stable USM system is realized by tracking the average value of machining force.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1155-1160
• /
• 2007

This paper presents position error for the robot localization system using the ultrasonic wave. The distance between the receiver and a beacon can be computed by using the difference between times of flight. The distance information measured by ultrasonic wave has errors. The position is calculated by distances, and this error is caused by distance errors. The position error is different from receiver¡s position. And the position is also calculated by beacon location. This paper calculates worst case position error within measuring area, and finds beacons location to reduce the position error.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.5
• /
• pp.725-731
• /
• 2013

In This paper, through simulation, proposes a system which makes it possible for freely moving multiple agents with ultrasonic receivers to estimate their own position by themselves using the ultrasonic signals sequentially emitted from multiple ultrasonic transmitters. This system possesses an advantage that there is no limit in the number of agents existing in the space covered by more than three transmitters fixed at proper locations. Hence, the proposed system can be utilized effectively in position tracking control of multiple robotic agents system and motion capturing system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1117-1124
• /
• 2010

This paper presents a foot movement tracking system using ultrasonic sensors and inertial sensors, where the position and velocity of foot are computed using inertial sensors and ultrasonic sensors mounted on a shoe. A foot movement can be estimated using an inertial navigation algorithm only; however, the error tends to increase due to biases of gyroscopes and accelerometers. To reduce the error, a localization system using ultrasonic sensors is additionally used. In the localization system using ultrasonic sensors, the position is continuously calculated in the absolute coordinate. An indirect Kalman filter is used to combine inertial sensors and ultrasonic sensors. Through experiments, it is shown that the proposed system can track a foot movement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.775-781
• /
• 2011

For the measurement of absolute position of mobile robot in indoor environments, the ultrasonic positioning systems using ultrasound have been researched for several years. Most of these ultrasonic positioning systems to avoid interference between the ultrasound are used for sequential transmitting. However, due to the use of sequential transmitting, the positions of transmitter to receive an ultrasound will change when the mobile robot moves. Therefore the accuracy of positioning is reduced. In this paper, the new position estimation algorithm with weighting factor according to the time of receipt is proposed. By applying the proposed algorithm to existing Ultrasonic Satellite System(USAT), the improved USAT is configured. The positioning performance of the improved USAT with the proposed position estimation algorithm are verified by experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.955-961
• /
• 2006

The global ultrasonic system for the self-localization of a mobile robot consists of several ultrasonic transmitters fixed at some reference positions in the global coordinates of robot environment. By activating the ultrasonic transmitters, the mobile robot is able to get the distance to the ultrasonic transmitters and compute its own position in the global coordinate. Due to the limitation on the ultrasonic signal strength and beam width as well as the environmental obstacles however, the ultrasonic signals from some generator may not be transmitted to the robot. Thus, instead of activating the all ultrasonic transmitters, it is necessary to select some ultrasonic generators to activate based on the current robot position. In this paper, we propose a selective activation algorithm for self-localization with the global ultrasonic system. The selective activation algorithm gets the meaningful ultrasonic data at every sampling instants, which results in the faster and more accurate response of the self-localization than the conventional sequential activation. Through the self-localization and path following control, we verify the effectiveness of the proposed selective activation algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.209-218
• /
• 2001

Ultrasonic motors are newly developed motors which are expected to be useful as actuators in many practical systems such as robot arms or manipulators because of several advantages against the electromagnetic motors. However, the precise control of the ultrasonic motor is generally difficult due to the absence of appropriate and rigorous mathematical model. Furthermore, owing to heavy nonlinearity, the position control of a pendulum system driven by the ultrasonic motor has a problem that control method using multiple neural network controllers based on a fuzzy inference system that can determine the initial position of the pendulum in the beginning of control operation. In addition, and appropriate neural network controller that has been learned to operate well at the corresponding initial position is adopted by switching schemes. The effectiveness of the proposed method was verified and evaluated from real experiments.