• 한국초전도ㆍ저온공학회논문지
• /
• 제8권1호
• /
• pp.26-28
• /
• 2006

The development technique of digital logic using CMOS device is close reached several limitations These make technical needs that are ultra high speed superconductive systems based on CMOS silicon digital computing technique. Comparing digital logic based on silicon CMOS, the computing technique based on ultra high speed superconductive systems has many advantages which are ultra low power consumption, ultra high operation speed. etc. It is estimated that features like these increasingly improve the possibility of ultra low power and ultra superconductive systems. In this paper digital logics of current CMOS technique and RSFQ superconductive technique are compared with and analyzed.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.849-853
• /
• 2014

In micro-scale electromechanical systems, the power to perform accurate position sensing often greatly exceeds the power needed to generate motion. This paper explores the implications of sampling rate and amplifier noise density selection on the performance of a system identification algorithm using a capacitive sensing circuit. Specific performance objectives are to minimize or limit convergence rate and power consumption to identify the dynamics of a rotary micro-stage. A rearrangement of the conventional recursive least-squares identification algorithm is performed to make operating cost an explicit function of sensor design parameters. It is observed that there is a strong dependence of convergence rate and error on the sampling rate, while energy dependence is driven by error that may be tolerated in the final identified parameters.

• 한국통신학회논문지
• /
• 제30권10C호
• /
• pp.992-998
• /
• 2005

본 논문에서는 고정밀 차량위치 추적 기반의 교통신호등 제어를 위한 저전송율 초광대역 무선통신 시스템에서의 Ultra Fast Acquisition 알고리즘을 연구하였다. 현재 CDMA에서 사용되는 acquisition방식으로는 저전송율 UWB시스템에서 회로가 복잡해지고 빠른 acquisition을 기대할 수 없기 때문에 새로운 Ultra Fast Acquisition방식이 필요하다. 기본적으로 Sequential Estimation방식을 사용하며 trinomial m-시퀀스를 사용하여 유비쿼터스 센서 네트워크용 U시스템에서 long PN code를 사용하는 경우에도 회로의 복잡도를 줄이고 FCC Emission limit을 만족시키면서, $1\~3{\mu}sec$이내의 acquisition을 가능하도록 설계하였다.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.199-204
• /
• 2021

Ultra-compact electric vehicles have narrow space for power conversion devices. This work presents schemes to achieve the high-power density of a low-voltage DC-DC converter (LDC): simplifying a converter structure by using sync-buck topology, applying a planar inductor using PCB winding, and applying a plate-type heat sink. The heat sink is placed between two PCBs, which increases the contact surface between the PCB and the heat-dissipating device. It enables the miniaturization of the converter to improve the conditions of heat radiation. The validity of the proposed scheme is verified through the experiment using a 500 W(12 V, 41.67 A) prototype with an input voltage range from 58 V to 84 V.

• 전기전자학회논문지
• /
• 제12권1호
• /
• pp.27-33
• /
• 2008

The demand of wireless communication is increased rapidly due to the development of wireless communication systems, and many people have the great interest about the "RF system". The trend of the RF audio system is to design the system with less power consumption. In this paper, we explain the Software Algorithm Design of RF systems that is suitable for low power consumption.

• 한국산업정보학회논문지
• /
• 제17권4호
• /
• pp.17-23
• /
• 2012

초저전력 설계나 에너지 수확 활용은 동적 전력과 정적 전력 사이의 균형을 이루는 점에 근접하는 문턱전압이하의 매우 낮은 전압에서 작동하는 디지털 시스템을 요구한다. 이런 동작 모드에서 일반적인 논리회로의 지연 변화는 매우 크게 된다. 따라서, 본 논문에서 MOSFET 나노 공정기술에서 전력소비를 줄이면서 여러 가지 공정 변이의 영향을 받지 않는 비동기 방식의 NCL (Null conventional logic)을 사용한 저전력 논리회로 설계 방법을 제안하고자 한다. 제안된 NCL 회로는 45nm의 공정기술에서 0.4V의 공급전압을 사용하였고, 각 NCL회로는 속도와 전력에 의해서 일반적인 동기식 회로와 비교되었다.

• Smart Structures and Systems
• /
• 제10권3호
• /
• pp.271-298
• /
• 2012

Researchers have made significant progress in recent years towards realizing effective structural health monitoring (SHM) utilizing wireless smart sensor networks (WSSNs). These efforts have focused on improving the performance and robustness of such networks to achieve high quality data acquisition and distributed, in-network processing. One of the primary challenges still facing the use of smart sensors for long-term monitoring deployments is their limited power resources. Periodically accessing the sensor nodes to change batteries is not feasible or economical in many deployment cases. While energy harvesting techniques show promise for prolonging unattended network life, low power design and operation are still critically important. This research presents the WiSeMote: a new, fully integrated ultra-low power wireless smart sensor node and a flexible base station, both designed for long-term SHM deployments. The power consumption of the sensor nodes and base station has been minimized through careful hardware selection and the implementation of power-aware network software, without sacrificing flexibility and functionality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2002

Ultra-wide bandwidth (UWB) detection method has been widely used as a front end detection scheme for the ultra-high frequency (UHF) partial discharge (PD) monitoring systems. A broad-band video detector module was developed and characterized for the UHF UWB PD detection systems. The useable bandwidth of the module is more than 2 GHz and it is optimized for 50-ohm systems. The detection sensitivity and dynamic range of the module were characterized by using a known ns-width RF pulses of GHz range. The dynamic range is more than 6-decades and the module can detect pulsed RF signals down to 1 nW. The detector module can eliminate expensive equipment such as high speed oscilloscopes and radio frequency (RF) spectrum analyzers. Therefore, it enables one to use slow speed data acquisition systems for the PD monitoring at the UHF range. The detector module was used to detect real PDs of about <3 pC. The module converts the UWB PD signals into a low-bandwidth video signal with a high signal-to-noise ratio.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.163-172
• /
• 2004

Ultra Wide Bandwidth (UWB) spread-spectrum techniques will playa key role in short range wireless connectivity supporting high bit rates availability and low power consumption. UWB can be used in the design of wireless local and personal area networks providing advanced integrated multimedia services to nomadic users within hot-spot areas. Thus the assessment of the possible interference caused by UWB devices on already existing narrowband and wideband systems is fundamental to ensure nonconflicting coexistence and, therefore, to guarantee acceptance of UWB technology worldwide. In this paper, we study the coexistence issues between an indoor UWB-based system (hot-spot) and outdoor point to point (PP) links and Fixed Wireless Access (FWA) systems operating in the 3.5 - 5.0 GHz frequency range. We consider a realistic UWB master/slave system architecture and we show through computer simulation, that in all practical cases UWB system can coexist with PP and FWA without causing any dangerous interference.

• 한국컴퓨터정보학회논문지
• /
• 제29권3호
• /
• pp.75-81
• /
• 2024

본 논문은 딥러닝 모델이 포함된 TinyML(Tiny Machine Learning)를 초저전력 시스템에 탑재하여, 층간소음 문제를 실시간으로 처리하는 방법을 제시한다. 이 방법이 가능한 이유는 딥러닝 모델 경량화 기술로 인해 컴퓨팅 리소스가 작은 시스템도 자체적으로 추론을 수행 할 수 있기 때문이다. 기존에 층간소음 문제를 해결하기 위해 제시됐던 방법은 센서에서 수집한 데이터를 서버로 보내어 데이터를 분석한 후에 처리하는 방법 이었다. 하지만 이러한 중앙 처리 방법은 구축 비용이 비싸고 복잡하며, 실시간 처리가 어려운 문제가 있다. 이러한 한계점을 본 논문에서는 TinyML을 사용한 On-Sensor AI(Artificial Intelligent) 로 해결하였다. 본 논문에서 제시한 방법은 시스템 설치가 간단하고 저비용 이면서 문제를 실시간적으로 처리할 수 있다.