• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1221-1228
• /
• 2016

In this paper, we propose a modified rhombus slot UWB(Ultra Wide Band) antenna with fork-shaped feeding structure. The proposed antenna is modified rhombus slot structure and fork-shaped feeding structure to get ultra-wideband characteristics for UWB communication. Modified rhombus slot structure consists of slot shaped which eliminated upper and lower part of the basic rhombus slot. The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $34mm(W_1){\times}34mm(L_1){\times}1mm(t)$, and its slot antenna size is $30mm(W_2){\times}16.75mm(L_3+L_4)$. After carrying out the simulation of each parameters, optimized values are obtained. From the fabricated and measured results, return loss of the proposed antenna satisfied Return Loss -10dB in 3.1 ~ 10.6 GHz. And measured results of gain and radiation patterns characteristics displayed for operating bands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.951-957
• /
• 2003

The analysis of RF performance requirement conditions on communication system is critical indicator to predict the performance of system. UWB(Ultra Wide Band) system which the standard is not established yet is difficult to derive the precise system performance requirement condition. Also, there are differences between conventional UWB system and multi-band system about RF performance requirement condition. In this thesis, the differences are analyzed and performance requirement conditions of multi-band UWB system are described on the basis of the differences. Throughput, maximum transmit power, and sensitivity of multi-band UWB system is varied with respect to the number of Sub-Bands. In addition, because of Multi-path effect, if PRF(Pulse Repetition Frequency) is changed, the Multi-path link margin is happened to compensate for Multi-path Energy Loss which is contributed by increasing of the Link Margin. According to Multi-path Margin, the variation of the resistance with respect to sensitivity and interference signal is observed and analyzed through the simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2518-2525
• /
• 2015

In this paper, we propose a UWB(Ultra Wide Band) antenna with CPW(Coplanar Waveguide) structure notched the 802.11a(5.15 ~ 5.825 GHz) band by using the U shaped slot. The proposed antenna not only shows Ultra-Wideband characteristic(3.1 ~ 10.6 GHz) suitable for UWB communications but has partially notched-band characteristic to reject 5 GHz WLAN band(5.15 ~ 5.825 GHz). The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $30mm(W){\times}20mm(L){\times}1mm(t)$. Fabricated antenna satisfied $VSWR{\leq}2$ in 3.1 ~ 10.6 GHz except for the band rejection of 5.15 ~ 5.825 GHz. And measured results of gain and radiation patterns characteristics displayed determined for operating bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1159-1164
• /
• 2006

Broadband antennas have late-time ringing by multi-reflections between feed points and 0pen ends of the antennas, which indicates the narrowband nature of the antenna. The resistive loading has been used to reduce the late time ringing that is important for ground penetrating radar and resonance detection systems in order to prevent masking of target. In this paper, we design an ultra wide band antenna with resistive loading technique to reduce the internal reflections within the antenna.. The designed antenna is implemented and tested to show inIproved characteristics.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.54-61
• /
• 2001

In conventional Ultra Wide Band(UWB) system, it uses Pulse Positioning Modulation Method to modulate data signal. In this paper, however, we derive power spectral density characteristic of time hopped antipodal signal using stochastic process. UWB signal employes Gaussian monopulse and Rayleigh monopulse which pulse width is 0.5 nsec and interval is 5 nsec. But comb line which produces unintentionally could be evidently reduced by the time hopped code, so this code be used to channelize for multiple access and minimize to different communication system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.102-108
• /
• 2006

In this paper, we propose an interference cancellation(IC) scheme using a partial Rake(PRAKE) combining in ultra-wideband(UWB) multipath fading channels. In this IC scheme, differently from the conventional transmitter model, which employs a guard interval between each frame, the guard interval is employed between each slot for estimating the multiple access interference(MAI). The UWB systems using the proposed IC scheme have little performance degradation without regard to the number of user, while the conventional UWB systems have a significant performance degradation according to the number of user. In order to reduce the receiver complexity, the PRAKE combining of post-canceled signal and the partial user IC scheme are also proposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.34-40
• /
• 2001

Ultra Wide Band (UWB) system uses wide band signal, which power spectral density is over all band, It likes as a noise floor, so UWB system can be used without interfering with other communication system. For the first time, we adopted Rayleigh mono pulse antipodal signal which had symmetric characteristic and zero mean. With the power spectral density using stochastic process, we knew that the antipodal signaling scheme removed discrete spectrum and concluded that this had much better spectral suppression, probability of error and data rate than PPM (Pulse Positioning Modulation).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1085-1090
• /
• 2010

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Cellular CDMA and Korean PCS. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a Cellular CDMA and K-PCS digital transmission system. The average frame error rate degradation of each system arc presented. From these experimental results, we show that in all practical cases UWB system can coexist with Cellular CDMA and K-PCS terminal without causing any dangerous interference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.909-916
• /
• 2008

In this paper, we propose and analyze M-ary pulse order time hopping multiple access ultra wideband (PO-THMA UWB) system using modified Hermite polynomial (MHP). The MHP pulses have a mutually orthogonal property between different ordered pulses and that property makes simultaneous transmission at the same time slot regardless of collision in the THMA-UWB system. Therefore, we derive the cross-correlation furlction of MHP pulses and analyze the BER of the proposed system and show that the BER performance and the transmission capacity are improved dramatically when compared with those of conventional THMA-UWB system.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.383-388
• /
• 2009

In this paper, we focus on the retransmission following transmission failure in impulse radio ultra wideband (IR-UWB). The reasons of transmission failure are classified and a new 'selfish' retransmission protocol is proposed because time hopping can support multiple transmissions at the same time. Selfish retransmission protocol retransmits packets immediately without any kind of timeout or channel observation. Simulation results show that the proposed protocol improves throughput up to 50% and decreases retransmission delay also up to 70%, compared to a conventional retransmission system in IR-UWB.