• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.23-26
• /
• 2002

Two modes of shock waves propagating in He II (superfluid helium), this is a compression and a thermal shock waves, were studied experimentally by using superconductive temperature sensors, piezo pressure transducers and Schlieren visualization method with an ultra-high-speed video camera (40,500 pictures/sec). The shock waves are induced by a gas dynamic shock wave impingement upon a He II free surface. It is found that the shock Mach number of a transmitted compression shock wave is up to 1.16, and the shock Mach number of a thermal shock wave coincides well with the second sound velocity under each compressed He II state condition. The temperature rise ratio of an induced thermal shock wave to that of an incident gas dynamic shock wave was found to be very small, as small as 0.003 at 1.80K.

• 대한의용생체공학회:의공학회지
• /
• 제15권3호
• /
• pp.275-280
• /
• 1994

In the case of the image reconstruction from unknown projection data such as imaging the object with opaque obstructions, conventional reconstruction algorithms may reconstruct a degraded image. In this paper, a new method for the estimation of the unknown projection data based on known projection data and the bandwidth of projection data is proposed. The proposed method successfully estimates the unknown projection data through iterative transformation between projection space and frequency space using the known projection data and the bandwidth of the projection data. Computer simulation shows that the proposed method significantly improves image quality and convergence behavior over conventional algorithms. In addition, the proposed method is successfully applied to ultrasound attenuation CT using a sponge phantom.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1217-1220
• /
• 1987

We have developed a Ultra Sound Pulsed Doppler System with two-dimensional M-mode image and Spectrum analyzer. The image of the M-mode is composed of time and depth axes. The Spectrum analyzer shows the spectrum of Doppler signal which represents the velocity component of time dependent blood-flow behavior. The spectrogram using Spectrum analyzer is composed of frequency and amplitude axes. The outputs of the system are audio signals, velocity curves, velocity profiles, M-mode images and spectrogram.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1176-1181
• /
• 2010

This paper proposes three positioning algorithms using TOA measurements: 1) The well-known linearization method using Taylor series, 2) a modified Savarese method considering measurement noise, which does not need linearization, and 3) a modified Bancroft method where TOA measurements instead of pseudorange measurements are considered. Furthermore, through an error analysis, for Savarese method, divergence of altitude is anticipated if the transmitters are located at the same height. To prevent height divergence, the Savarese method is modified again for receivers which assumed moving on the even plane. Error analysis also shows the relationship between Bancroft and Savarese method. From the analysis it is expected that the performance of Savarese method is worse than Bancroft method because of error amplification during difference operation. Experiments using real TOA measurement from the time difference of ultra sound and RF validate the proposed methods and show that analysis is correct.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 춘계 종합학술대회 논문집
• /
• pp.535-539
• /
• 2004

This paper is concerned with structurizing contents of the ergonomic resources and constructing DB of these resources. Through this internet system developed using ultra 2 DB Server, Sun Solaris(UNIX) OS, UniSql DBMS, Apache Web server, the interface (www.gamsung.or.kr), by which ergonomic resources can be provided, has been completed. Information retrieval concerning ergonomic resources produced by the project "Business of Development in Technology of Human Sensibility Ergonomics" is possible. For example, 35 reports and 262 ergonomic characteristics issued from the first step of this project, 255 ergonomic characteristics issued from the second step. In addition, there are also voice data, sound data, expression data, questionnaire data, sensibility data, and information about researchers, manufactories, references.

• Restorative Dentistry and Endodontics
• /
• 제11권1호
• /
• pp.11-18
• /
• 1985

The purpose of this study was to observe the facial, lingual and gingival walls of the cavity walls with various kinds of cutting tools. Class II cavities were prepared in newly extracted sound humen mandibular 1st left premolars, and observed in Sanning electron microscope. Diamond point (#201) and Tungsten Carbide burs (#170L) were used in ultra high speed handpieces (rpm 200000), and Tungsten Carbide bur (#702) and Steel bur (#560) were used in conventional handpieces (rpm 6000). All cavities were prepared under water spray, except for some which were finished with a dry abrasive stone (#57). Some cavities were finished with chisels (#41, 42, 83). The following results were obtained. 1. The cavity walls prepared with Diamond point were rougher than the cavity walls with Carbide burs and Steel burs. 2. The chisels were produced the smoothest surface. 3. The cavity walls which were prepared with cutting blades rotated toward enamel surface from outside, were smoother than cavity walls which were prepared with cutting blades rotated toward outside from the enamel surface.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.168-171
• /
• 1997

The purpose of this study is the development of PBL(problem-based learning) system using visual C++5.0 as a window-based application program. A patient who complains of weight loss was used in PBL case. Initial frame is made by dialog-based in MFC(microsoft foundation class). Also, sample medical images are composed of ultra-sound, chest PA, Thyroid scan, otherwise. we will make this program as CD-ROM and the internet application or computer assisted learning and continuous medical education.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.421-425
• /
• 2016

Micro-EDM is one of the recent fine-machining technologies. Micro-EDM is widely used in precision processes because products manufactured via EDM are free from workpiece hardness. However, the debris produced during the process cause many problems such as reduced precision of the process. The first solution of this problem involves using the milling hole process. Micro-EDM hole process involves an electrode moving rapidly in the vertical direction via a servo system to disperse debris. However, this process can cause reduced work efficiency owing to contact between the electrode and workpiece. In this study, ultrasonic vibration is added to micro-EDM channel machining. Ultrasonic vibration removes the debris during machining and enables precision machining. Consequently, a clean work environment for the subsequent processes is maintained.

• 대한의용생체공학회:의공학회지
• /
• 제12권3호
• /
• pp.209-214
• /
• 1991

Digital fetal monitoring system based on the personal computer combined with the digital signal processing (DSP) board was implemented. The DSP board acquires and digitally processes ultra- sound fetal Doppler signal for digital signal conditioning, rectification, low -pass filtering, autocorrealtion function calculation and its peak detection. The personal computer interfaced with the DSP board is in charge of graphic display, hardcopy, data transmission and on -line analysis of fetal heart rate change including on - line warning system, base -line estmation, acceleration, deceleration and variability. It is one of the most suitable situation to apply the DSP chip for siganl conditioning, digital filtering of ultrasound fetal Dopier signal and fetal heart rate estimation using autocorrelation technique .

• 대한임상전기생리학회지
• /
• 제2권1호
• /
• pp.39-48
• /
• 2004

The study was to determine the effect of local anesthetics phonophoretic. Emla 5%(lidocaine+prilocaine) cream make use of medicines. Phonophoretic the application of a ultra sound(I group), application an ointment(II group). Forty college student between the age of man $22.85{\pm}3.31$ woman $21.05{\pm}2.12$, weight of man $70.70{\pm}9.43\;kg$ woman $50.65{\pm}5.13\;kg$, height of man $17.6{\pm}5.43\;cm$ woman $161.20{\pm}4.34\;cm$ were in this study. The results was as follows. There was statistical difference between I group($49.25{\pm}10.83$) and II group($58.90{\pm}10.83$) for the timing of local anesthetics(p<.05).