• 한국유체기계학회 논문집
• /
• 제14권3호
• /
• pp.23-27
• /
• 2011

Due to a roots type medium vacuum pump is operated in condition of $1{\sim}10^{-3}$ torr vacuum, it could be applied for production and process of industrial parts, such as precise processing, vaporization, enrichment, separation, casting, metaling, welding, transportation. Therefore, the demand of this pump is increasing nowadays in our industrial markets of semiconductor, electric, electronic, automobile, material, environmental and transporting industries. However, the pumps are almost imported, because the domestic pumps are inferior in fields of vacuum range as under $10^{-1}$torr, relevant techniques(design, fabrication, casting, test, etc.) to the imported ones. In this study, essential parts of the development pump are designed with using of CFD and 3D decodes, FEM for analysing strength and deformation, generated heat, vibration and noise control, and are casted with using of mechanochemistry techniques for decreasing of weights, increasing of heat resistances and abrasion durability of materials for pump caing and impellers especially. Besides, in order to achieve ultimate vacuum around $10^{-3}$torr, this pump is composed of 6 stages, among which 1st stage is operated separately from remained stages. Additionally, a test rig for prototype pumps(300$m^3/h$ and 2,500$m^3/h$) is designed and procured as to apply for multi-staged rootz type vacuum pump, with modification of the test method recommended by KS B 6314 "Positive-displacement oil-sealed rotary vacuum pumps".

• Steel and Composite Structures
• /
• 제33권4호
• /
• pp.615-627
• /
• 2019

This paper aims to study the compressive behavior of circular hollow and concrete-filled steel tubular stub columns under simulated marine atmospheric corrosion. The specimens after salt spray corrosion were tested under axial compressive load. Steel grade and corrosion level were mainly considered in the study. The mechanical behavior of circular CFST specimens is compared with that of the corresponding hollow ones. Design methods for circular hollow and concrete-filled steel tubular stub columns are modified to consider the effect of marine atmospheric corrosion. The results show that linear fitting curves could be used to present the relationship between corrosion rate and the mechanical properties of steel after simulated marine atmospheric corrosion. The ultimate strength of hollow steel tubular and CFST columns decrease with the increase of corrosion rate while the ultimate displacement of those are hardly affected by corrosion rate. Increasing corrosion rate would change the failure of CFST stub column from ductile failure to brittle failure. Corrosion rate would decrease the ductility indexes of CFST columns, rather than those of hollow steel tubular columns. The confinement factor ${\xi}$ of CFST columns decreases with the increase of corrosion rate while the ratio between test value and nominal value shows an opposite trend. With considering marine atmospheric corrosion, the predicted axial strength of hollow steel tubular and CFST columns by Chinese standard agree well with the tested values while the predictions by Japanese standard seem conservative.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.315-328
• /
• 2019

This paper presents an investigation on bearing capacity, load-settlement behavior and safety factor of rock-soil slopes reinforced using geogrid-box method (GBM). To this end, small-scale laboratory studies were carried out to study the load-settlement response of a circular footing resting on unreinforced and reinforced rock-soil slopes. Several parameters including unit weight of rock-soil materials (loose- and dense-packing modes), slope height, location of footing relative to the slope crest, and geogrid tensile strength were studied. A series of finite element analysis were conducted using ABAQUS software to predict the bearing capacity behavior of slopes. Limit equilibrium and finite element analysis were also performed using commercially available software SLIDE and ABAQUS, respectively to calculate the safety factor. It was found that stabilization of rock-soil slopes using GBM significantly improves the bearing capacity and settlement behavior of slopes. It was established that, the displacement contours in the dense-packing mode distribute in a broader and deeper area as compared with the loose-packing mode, which results in higher ultimate bearing load. Moreover, it was found that in the loose-packing mode an increase in the vertical pressure load is accompanied with an increase in the soil settlement, while in the dense-packing mode the load-settlement curves show a pronounced peak. Comparison of bearing capacity ratios for the dense- and loose-packing modes demonstrated that the maximum benefit of GBM is achieved for rock-soil slopes in loose-packing mode. It was also found that by increasing the slope height, both the initial stiffness and the bearing load decreases. The results indicated a significant increase in the ultimate bearing load as the distance of the footing to the slope crest increases. For all the cases, a good agreement between the laboratory and numerical results was observed.

• Geomechanics and Engineering
• /
• 제28권6호
• /
• pp.599-611
• /
• 2022

Tendon reinforced cemented soil is applied extensively in foundation stabilisation and improvement, especially in areas with soft clay. To solve the deterioration problem led by steel corrosion, the glass fiber-reinforced polymer (GFRP) tendon is introduced to substitute the traditional steel tendon. The interface bond strength between the cemented soil matrix and GFRP tendon demonstrates the outstanding mechanical property of this composite. However, the lack of research between the influence factors and bond strength hinders the application. To evaluate these factors, back propagation neural network (BPNN) is applied to predict the relationship between them and bond strength. Since adjusting BPNN parameters is time-consuming and laborious, the particle swarm optimisation (PSO) algorithm is proposed. This study evaluated the influence of water content, cement content, curing time, and slip distance on the bond performance of GFRP tendon-reinforced cemented soils (GTRCS). The results showed that the ultimate and residual bond strengths were both in positive proportion to cement content and negative to water content. The sample cured for 28 days with 30% water content and 50% cement content had the largest ultimate strength (3879.40 kPa). The PSO-BPNN model was tuned with 3 neurons in the input layer, 10 in the hidden layer, and 1 in the output layer. It showed outstanding performance on a large database comprising 405 testing results. Its higher correlation coefficient (0.908) and lower root-mean-square error (239.11 kPa) were obtained compared to multiple linear regression (MLR) and logistic regression (LR). In addition, a sensitivity analysis was applied to acquire the ranking of the input variables. The results illustrated that the cement content performed the strongest influence on bond strength, followed by the water content and slip displacement.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.331-340
• /
• 2008

본 연구는 상부 플랜지가 없는 I형 강재 거더, 즉 역T형의 강재 거더의 일부를 콘크리트에 매립한 역T형강-콘크리트 합성바닥판의 구조거동을 실험적 연구를 통해 분석하여 이를 토대로 새로운 개념의 교량 바닥판 상세를 제안하고자 실시하였다. 이를 위해 기존의 철근콘크리트 바닥판과 강합성 바닥판 시험체를 제작하여 정적 휨파괴 시험을 실시하였다. 이로부터 극한 및 최대하중을 평가하였으며, 전단홀 관통 철근의 적용 유무에 따른 구조거동의 변화를 분석하였다. 실험 결과 전단홀 관통 철근을 적용할 경우에는 충분한 전단강도가 확보되어 전형적인 인장파괴 형태를 나타내고, 극한 및 최대하중 모두 철근콘크리트 바닥판보다 높아지는 것을 알 수 있었다. 또한 철근콘크리트 바닥판보다 강합성 바닥판의 처짐이 크게 발생하는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.165-182
• /
• 2024

Grouted sleeve splice (GSS) is an effective type of connection applied in the precast concrete structures as it has the advantages of rapidly assembly and reliable strength. To decrease the weight and cost of vertical rebar connection in precast shear walls, a light-weight sleeve is designed according to the thick-cylinder theory. Mechanical behaviour of the light-weighted GSS is investigated through experimental analysis. Two failure modes, such as rebar fracture failure and rebar pull-out failure, are found. The load-displacement curves exhibit four different stages: elastic stage, yield stage, strengthening stage, and necking stage. The bond strength between the rebar and the grout increases gradually from outer position to inner position of the sleeve, and it reaches the maximum value at the centre of the anchorage length. A finite element model predicting the mechanical properties of the light-weighted GSS is developed based on the Concrete Damage Plasticity (CDP) model and the Brittle Cracking (BC) model. The effect of the rebar anchorage length is significant, while the increase of the thickness of sleeve and the grout strength are not very effective. A model for estimating ultimate load, including factors of inner diameter of sleeves, anchorage length, and rebar diameter, is proposed. The proposed model shows good agreement with various test data.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.71-86
• /
• 1999

본 연구는 국내 11 네일링 현장을 대상으로 경사계와 변형률계의 계측자료를 이용하여 쏘일네일링 벽체의 변위와 네일의 인장력을 고찰하였다. 연구결과 최대수평변위량은 시공과정이 양호한 현장의 경우와 불량한 경우 각각 굴착깊이(H)의 0.2%, 0.3%이하로 나타났으며, 벽체의 최대수평변위 발생위치는 지표면으로부터 굴착심도의 약 5~l5%이내의 벽체상단에서 발생하였다. 최종굴착깊이$(H_f)$와 네일의 길이(L)와의 길이비 R이 0.5이하, 0.5~0.6, 0.6~0.7인 경우 최대수평변위가 각각 굴착깊이(H)의 0.4%, 0.3%, 0.2%로 나타났다. 그러나 길이비 R이 0.7이상인 경우에는 최대수평변위가 굴착깊이의 약0.3%로 증가하는 것으로 나타났으며 이러한 결과는 굴착깊이가 얕고, 토사층 부분이 많았기 때문으로 판단된다. 최대인장력을 무차원화한 K값은 지표면으로부터 최종굴착깊이$(H_f)$의 $0.6H_f$까지는 0.8이하로 나타났으며, $0.6H_f$에서부터 최종굴착면까지 선형적으로 감소하는 것으로 나타났다. 그리고 최종굴착완료시 네일의 최대 인장력$(T_{max)$이 네일의 항복인장력$(T_{\sigmay)$에 최대 60%까지 도달하는 것으로 나타났다.

• 한국지반공학회논문집
• /
• 제29권7호
• /
• pp.17-36
• /
• 2013

본 연구에서는 해상 교량 현장과 초고층빌딩 현장에서 실시한 암반에 근입된 대구경 현장타설말뚝의 양방향 재하시험(총 4개 현장, 13개 말뚝) 결과를 분석하여 연암에서의 주면마찰력과 선단지지력 산정을 위한 경험식을 제안하였다. 양방향 재하시험을 위하여 각 시험 말뚝의 정 중앙 위치에서 시추 및 지반조사가 이루어졌으며, 각 말뚝에 부착한 계측장치로부터 얻은 데이터를 이용하여 주면의 f-w 곡선과 선단의 q-w 곡선을 작성하였다. 이 곡선들로부터 - 지반조사결과들과 주면마찰력 및 선단지지력에 대한 다중회귀분석을 실시하여 - 변위에 따른 극한 주면마찰력과 선단지지력 산정식을 제안하였으며, 이 결과를 기존의 경험식들과 비교 분석하였다. 변위가 증가할수록 지지력이 증가하는 국내 암반의 f-w 곡선과 q-w 곡선의 특성상, 다양한 말뚝 변위기준에 따라 제안한 경험식들이 변위와 무관하게 일정한 극한값으로 제안된 기존의 경험식들보다 더 합리적인 것으로 판단된다. 본 연구의 제안식들 중에서 일축압축강도의 함수로 나타낸 주면마찰력 및 선단지지력에 대한 제안식이 다른 지반정수들에 의한 경험식보다 좋은 상관관계를 보여주는 것으로 나타났다.

• Wind and Structures
• /
• 제28권2호
• /
• pp.71-87
• /
• 2019

The yaw and interference effects of blades affect aerodynamic performance of large wind turbine system significantly, thus influencing wind-induced response and stability performance of the tower-blade system. In this study, the 5MW wind turbine which was developed by Nanjing University of Aeronautics and Astronautics (NUAA) was chosen as the research object. Large eddy simulation on flow field and aerodynamics of its wind turbine system with different yaw angles($0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$) under the most unfavorable blade position was carried out. Results were compared with codes and measurement results at home and abroad, which verified validity of large eddy simulation. On this basis, effects of yaw angle on average wind pressure, fluctuating wind pressure, lift coefficient, resistance coefficient,streaming and wake characteristics on different interference zone of tower of wind turbine were analyzed. Next, the blade-cabin-tower-foundation integrated coupling model of the large wind turbine was constructed based on finite element method. Dynamic characteristics, wind-induced response and stability performance of the wind turbine structural system under different yaw angle were analyzed systematically. Research results demonstrate that with the increase of yaw angle, the maximum negative pressure and extreme negative pressure of the significant interference zone of the tower present a V-shaped variation trend, whereas the layer resistance coefficient increases gradually. By contrast, the maximum negative pressure, extreme negative pressure and layer resistance coefficient of the non-interference zone remain basically same. Effects of streaming and wake weaken gradually. When the yaw angle increases to $45^{\circ}$, aerodynamic force of the tower is close with that when there's no blade yaw and interference. As the height of significant interference zone increases, layer resistance coefficient decreases firstly and then increases under different yaw angles. Maximum means and mean square error (MSE) of radial displacement under different yaw angles all occur at circumferential $0^{\circ}$ and $180^{\circ}$ of the tower. The maximum bending moment at tower bottom is at circumferential $20^{\circ}$. When the yaw angle is $0^{\circ}$, the maximum downwind displacement responses of different blades are higher than 2.7 m. With the increase of yaw angle, MSEs of radial displacement at tower top, downwind displacement of blades, internal force at blade roots all decrease gradually, while the critical wind speed decreases firstly and then increases and finally decreases. The comprehensive analysis shows that the worst aerodynamic performance and wind-induced response of the wind turbine system are achieved when the yaw angle is $0^{\circ}$, whereas the worst stability performance and ultimate bearing capacity are achieved when the yaw angle is $45^{\circ}$.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.57-69
• /
• 1999

오염된 연약지반에 편재하중이 작용하는 경우에 있어서 지반의 소성화에 따른 지지력 결정을 위하여 기존의 이론적인 배경을 고찰하고, 이러한 오염된 연약지반에서 편재하중에 의한 지반의 지지력과 변형에 대한 거동을 연구하기 위하여 모형실험을 통한 실측치를 이용하여 서로 비교.분석하였다. 모형실험은 모형 재하장치인 토조와 재하틀 및 재하판을 제작하여 토조안에 함수비를 일정하게 유지한 상태에서 자연지반의 시료와 오염물질을 점진적으로 증가시킨 지반시료에 일정한 시간간격으로 편재하중을 증가시키면서 침하량과 측방변위량 및 융기량 등을 관찰하였다. 그 결과 한계하중은 실험값이 $Tschebotarioff(q_{cr}=3.0_{Cu)$의 제안값과 $Meyerhof(q_{cr}=(B/2H+\pi/2_{Cu})$의 제안값에 근접하여 $q_{cr}=2.78_{Cu$값을 나타냈고, 극한하중은 Prandtl의 제안값에 근접하여 $q_{ult}=4.84_{Cu}$의 값을 나타냈다