• 한국강구조학회 논문집
• /
• 제13권2호
• /
• pp.201-210
• /
• 2001

본 연구에서는 편심 축력을 받는 가셋트-강관 접합부의 극한 내력을 파악하기 위하여 실험 및 유한요소해석을 수행하였다. 가셋트-강관 접합부의 내력에 영향을 주는 요소는 강관의 직경, 가셋트판 길이, 축력과 횡력의 비, 횡력에 의한 편심 등으로 이들이 주재의 좌굴내력에 미치는 영향을 정량적으로 파악하여 접합부 강도식을 제안하였다. 특히 횡력에 의한 편심이 주재에 작용할 때 이를 설계식에 반영하기 위하여 횡력을 등가의 모멘트 및 편심 축력으로 대치한 수치 모형을 제시하였다. 결과적으로 접합부의 작용하는 외력을 주주재 축력, 모멘트, 편심 축력으로 분해하고 각 외력에 대한 독립적인 극한내력을 구한후 이들의 상관 관계식을 구함으로써 접합부 극한강도식을 제시하였다.

• 한국지반공학회지:지반
• /
• 제3권3호
• /
• pp.21-30
• /
• 1987

말뚝머리에 수평력을 받는 단일주동말뚝의 극한수평저항력을 산정할 수 있는 몇몇 방법이 수평직 반반력, 말뚝길이 및 말뚝두부구속조건을 고려하여 확립제안된다. 말뚝의 이동에 의하여 주동말뚝 이 지반으로 부터 받게 되는 극한수평지반반력은 말뚝주변지반의 소성상태 및 말뚝형상을 고려하 는 것에 중점을 두어 유도한 산정이론식을 이용하여 산정될 수 있다. 말뚝은 짧은말뚝, 긴말뚝 등 으로 구분되며 이는 말뚝에 발생하는 최대횡모멘트와 항복모멘트의 비교에 의하여 구분된다. 말뚝 머리의 구속조건으로는 두부자유 및 두부요전구동의 두가지 경우가 취급된다. 실측치와의 비교에 의하면, 본이론에 의한 극한수평진항력은 Broms이론에 의한 이론치보다 더 잘 실측치에 접근하고 있음을 보여 준다.

• Steel and Composite Structures
• /
• 제14권2호
• /
• pp.173-190
• /
• 2013

The major objective of this paper is to evaluate the behavior and ultimate resisting capacity of circular CFT columns. To consider the confinement effect, proper material models with respect to the confinement pressure are selected. A fiber section approach is adopted to simulate the nonlinear stress distribution along the section depth. Material nonlinearity due to the cracking of concrete and the yielding of the surrounding steel tube, as well as geometric nonlinearity due to the P-${\Delta}$ effect, are taken into account. The validity of the proposed numerical analysis model is established by comparing the analytical predictions with the results from previous experimental studies about pure bending and eccentric axial loading. Numerical predictions using an unconfined material model were also compared to investigate the confinement effects on various loading combinations. The ultimate resisting capacities predicted by the proposed numerical model and the design guidelines in Eurocode 4 are compared to evaluate the existing design recommendation.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.52-60
• /
• 2002

Failure criterion is a parameter to represent the resistance to failure of locally wall thinned pipe, and it depends on material characteristics, defect geometry, applied loading type, and failure mode. Therefore, accurate prediction of integrity of wall thinned pipe requires a failure criterion adequately reflected the characteristics of defect shape and loading in the piping system. In the present study, the finite element analysis was performed and the results were compared with those of pipe experiment to develop a sound criterion for failure of internally wall thinned pipe subjected to combined pressure and bending loads. By comparing the predictions of failure to actual failure load and displacement, an appropriate criterion was investigated. From this investigation, it is concluded that true ultimate stress criterion is the most accurate to predict failure of wall thinned pipe under combined loads, but it is not conservative under some conditions. Engineering ultimate stress estimates the failure load and displacement reasonably for al conditions, although the predictions are less accurate compared with the results predicted by true ultimate stress criterion.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.319-336
• /
• 2021

To achieve a rational detail of the girder-abutment joints in composite integral bridges, and validate the performance of the joints with perfobond connectors, this paper proposes two innovative types of I-shaped steel girder-concrete abutment joints with perfobond connectors intended for the most of bearing capacity and the convenience of concrete pouring. The major difference between the two joints is the presence of the top flange inside the abutments. Two scaled models were investigated with tests and finite element method, and the damage mechanism was revealed. Results show that the joints meet design requirements no matter the top flange exists or not. Compared to the joint without top flange, the initial stiffness of the one with top flange is higher by 7%, and the strength is higher by 50%. The moment decreases linearly in both types of the joints. At design loads, perfobond connectors take about 70% and 50% of the external moment with and without top flange respectively, while at ultimate loads, perfobond connectors take 53% and 26% of the external moment respectively. The ultimate strengths of the reduced sections are suggested to be taken as the bending strengths of the joints.

• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.637-648
• /
• 2021

Nowadays, one of the practical, fast and easy ways to strengthen steel elements is the use of Carbon Fiber Reinforced Polymer (CFRP). Most previous research in the CFRP strengthening of steel members has carried out on straight steel members. The main difference between horizontal curved beams and straight beams under vertical load is the presence of torsional moment in the horizontal curved beams. In the other words, the horizontal curved beams are analyzed and designed for simultaneous internal forces included bending moment, torsional moment, and shear force. The horizontal curved steel beams are usually used in buildings, bridges, trusses, and others. This study explored the effect of the CFRP strengthening on the behavior of the horizontal curved square hollow section (SHS) steel beams. Four specimens were analyzed, one non-strengthened curved steel beam as a control column and three horizontal curved steel beams strengthened using CFRP sheets (under concentrated load and uniform distributed load). To analyze the horizontal curved steel beams, three dimensional (3D) modeling and nonlinear static analysis methods using ANSYS software were applied. The results indicated that application of CFRP sheets in some specific locations of the horizontal curved steel beams could increase the ultimate capacity of these beams, significantly. Also, the results indicated when the horizontal curved steel beams were under distributed load, the increase rate in the ultimate capacity was more than in the case when these beams were under concentrated load.

• Steel and Composite Structures
• /
• 제11권2호
• /
• pp.131-147
• /
• 2011

The aim of this work is to provide some insights into the elasto-plastic behaviour of plate girder web square and rectangular panels with centred and eccentric holes under both compression and in-plane bending moment. The numerical study was validated comparing the numerical results obtained for one simple steel plate configuration with the corresponding experimental results, obtained at the University of Padova, observing the influence of the initial out-of-plane imperfections on the force vs. displacement relationship and ultimate strength. Once validated the numerical approach, the effect of bending moment on the stability of the plate is studied and some differences with respect to the uniform compression load case are shown. The influence of dimension and position of the hole, the plate aspect ratio and the steel grade on elasto-plastic behaviour is observed. Some indications regarding the critical slenderness (at which transition from elastic to plastic collapse occurs) are given for square and rectangular plates with symmetric and eccentric holes having small, medium and large diameter.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권1호
• /
• pp.171-178
• /
• 1999

Despite of decrease in shear and moment strengths, most steel structural designers use web openings in beams because of economical benefit and requirement. The purpose of this study is to suggest the method of reinforcement of H-shape steel beams with a rectangular web opening. If shear predominates over bending, it is necessary to consider all possible combinations of shear force and bending moment acting at the opening. In this paper, the ultimate strength and behavior of perforated beams have been investigated according to parameters (ratio of M/V, opening width within opening height ratio D/h, various reinforcing types A/B/C/D/M/N/W). The results of this study are as follows ; 1. Deformation of H-shape steel beams with a rectangular web opening was greatly affected by not only bending but also shear. 2. SB1-2/3 series have little difference in the reinforced efficiency, but SB1-2E/3E series have difference in the reinforced efficiency according to the reinforcement type. 3. Efficiency of SB1-2E/3E series is determined by reinforcing types, which RB1-2E-B/M/C and RB1-3E-M/D/C specimens have good efficient. Reinforcing type of perforated beams chooses efficient method according to ratio of M/V and D/h.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.579-584
• /
• 1999

In evaluating the ultimate strength of a section for a concrete flexural member, the effect of member length is not usually considered, even though the strength tends to decrease with increase of member length. In this paper the influence of specimen length on flexural compressive strength of concrete was evaluated. For this purpose, a series of C-shaped specimens subjected to axial compression and bending moment were tested using four different length-to-depth ratios(from 1, 2, 3 and 4) of specimens with compressive strength of 58 MPa. Results indicate that the reduction in flexural compressive strength with increase of length-to-width ratios was apparent. A model equation was derived using regression analyses on the experimental data. It was also founded that the effect of specimen length on ultimate strain was negligible, but its effect of the ultimate load and the displacement at center of specimen was distinct. Finally more general model equation is also suggested.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.335-343
• /
• 2003

철근 콘크리트 보의 휨 해석 시 적용되는 콘크리트 압축연단의 극한변형률(${\varepsilon}$$_{cu}$) 과 등가응력블럭 계수(${\beta)$$_1$)는 1축 뿐 만 아니라 2축 휨 해석에도 적용될 수 있는 것으로 여러 실험결과를 통하여 검증되었다. 그러나 2축 휨을 받는 기둥 단면에서와 같이 압축영역이 비직사각형인 경우 극한변형률과 등가응력블럭 계수는 압축영역이 직사각형인 경우와 달라지게 되고, 이와 같은 압축영역 형태에 따른 콘크리트 응력분포 특성의 변화는 기둥과 같이 고축력을 받는 경우 단면의 휨 강도에 중요한 영향을 끼치게 된다. 그러나 ACI318-99에서 제시하는 기둥의 2축 휨 설계도표는 1축과 2축 휨 해석에 동일한 응력분포 특성치를 적용하여 산출되었다. 본 논문에서는 중립축 각도와 깊이에 따른 응력분포 특성을 파악하고 이를 합리적으로 수식화 함으로써 수정된 단면 소성해석 모델을 제시하였다. 또한 제시된 소성해석 모델을 적용한 기둥 단면해석 Program을 개발하고 해석 결과를 기존의 소성해석 모델 및 실험결과와 비교하였다.