Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Elasto-plastic behaviour of perforated steel plates subjected to compression and bending

  • Maiorana, Emanuele (Department of Structural and Transportation Engineering, University of Padova) ;
  • Pellegrino, Carlo (Department of Structural and Transportation Engineering, University of Padova) ;
  • Modena, Claudio (Department of Structural and Transportation Engineering, University of Padova)
  • Received : 2010.04.13
  • Accepted : 2011.02.14
  • Published : 2011.03.25
⟨ Previous Next ⟩

Abstract

The aim of this work is to provide some insights into the elasto-plastic behaviour of plate girder web square and rectangular panels with centred and eccentric holes under both compression and in-plane bending moment. The numerical study was validated comparing the numerical results obtained for one simple steel plate configuration with the corresponding experimental results, obtained at the University of Padova, observing the influence of the initial out-of-plane imperfections on the force vs. displacement relationship and ultimate strength. Once validated the numerical approach, the effect of bending moment on the stability of the plate is studied and some differences with respect to the uniform compression load case are shown. The influence of dimension and position of the hole, the plate aspect ratio and the steel grade on elasto-plastic behaviour is observed. Some indications regarding the critical slenderness (at which transition from elastic to plastic collapse occurs) are given for square and rectangular plates with symmetric and eccentric holes having small, medium and large diameter.

Keywords

References

  1. Azhari, M., Shahidi, A.R. and Saadatpour, M.M. (2005), "Local and post local buckling of stepped and perforated thin plates", Appl. Math. Model., 29(7), 633-52. https://doi.org/10.1016/j.apm.2004.10.004
  2. Bedair, O.K. (1997), "Influence of in-plane restraint on the buckling behaviour of plates under uniform compression, shear and in-plane bending", Comp. Meth. Appl. Mech. Eng., 148, 1-10. https://doi.org/10.1016/S0045-7825(97)00035-2
  3. Brown, C.J. (1990), "Elastic buckling of perforated plates subjected to concentrated loads", Comp. Struct., 36(6), 1103-9. https://doi.org/10.1016/0045-7949(90)90218-Q
  4. Brown, C.J., Yettram, A.L. and Burnett, M. (1987), "Stability of plates with rectangular holes", J. Struct. Eng., ASCE, 113(5), 1111-6. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:5(1111)
  5. Cheng, C.J. and Fan, X.J. (2001), "Nonlinear mathematical theory of perforated viscoelastic thin plates with its applications", Inter. J. Solids. Struct., 38(36), 6627-41. https://doi.org/10.1016/S0020-7683(00)00412-1
  6. Durban, D. and Zuckerman, Z. (1999), "Elasto-plastic buckling of rectangular plates in biaxial compression/ tension", Int. J. Mech. Sci., 41, 751-65. https://doi.org/10.1016/S0020-7403(98)00055-1
  7. El-Sawy, K.M. and Martini, M.I. (2001), "Effect of aspect ratio on the elastic buckling of uniaxially loaded plated with eccentric holes", Thin. Walled. Struct., 39(12), 983-98. https://doi.org/10.1016/S0263-8231(01)00040-4
  8. El-Sawy, K.M., Nazmy, A.S. and Martini, M.I. (2004), "Elasto plastic buckling of perforated plates under uniaxial compression", Thin. Walled. Struct., 42(8), 1083-101. https://doi.org/10.1016/j.tws.2004.03.002
  9. El-Sawy, K.M. and Martini, M.I. (2007), "Elastic stability of bi-axially loaded rectangular plates with a single circular hole", Thin. Walled. Struct., 45(1), 122-33. https://doi.org/10.1016/j.tws.2006.11.002
  10. G+D Computing (2005), Straus7 user's manual, Sydney.
  11. Komur, M.A. and Sonmez, M. (2008a), "Elastic buckling of rectangular plates under linearly varying in-plane normal load with a circular cutout", Mech. Res. Communications., 35, 361-71. https://doi.org/10.1016/j.mechrescom.2008.01.005
  12. Komur, M.A. and Sonmez, M. (2008b), "Elastic buckling of perforated plates subjected to linearly varying inplane loading". Struct. Eng. Mech., 28(3), 353-356 https://doi.org/10.12989/sem.2008.28.3.353
  13. Maiorana, E., Pellegrino, C. and Modena, C. (2008a), "Linear buckling analysis of perforated plates subjected to localised symmetrical load", Engi. Struct., 30(11), 3151-8. https://doi.org/10.1016/j.engstruct.2008.04.024
  14. Maiorana, E., Pellegrino, C. and Modena, C. (2008b), "Linear buckling analysis of unstiffened plates subjected to both patch load and bending moment", Eng. Struct., 30(12), 3731-8. https://doi.org/10.1016/j.engstruct.2008.07.002
  15. Maiorana, E., Pellegrino, C. and Modena, C. (2009a), "Non-linear analysis of perforated steel plates subjected to localised symmetrical load", J. Const. Steel. Res., 65(4), 959-64. https://doi.org/10.1016/j.jcsr.2008.03.018
  16. Maiorana, E., Pellegrino, C. and Modena, C. (2009b), "Elastic stability of plates with circular and rectangular holes subjected to axial compression and bending moment", Thin.Walled. Struct., 47(3), 241-55. https://doi.org/10.1016/j.tws.2008.08.003
  17. Maiorana, E., Pellegrino, C. and Modena, C. (2009c), "Imperfections in steel girder webs with and without perforations under patch loading", J. Constr. Steel. Res., 65(5), 1121-9. https://doi.org/10.1016/j.jcsr.2008.10.007
  18. Narayanan, R. and Chow, F.Y. (1984), "Ultimate capacity of uniaxially compressed perforated plates", Thin. Walled. Struct., 2(3), 241-64. https://doi.org/10.1016/0263-8231(84)90021-1
  19. Narayanan, R. and Darwish, I.Y.S. (1985), "Strength of slender webs having non central holes", Struct. Eng., 63B(3), 57-61.
  20. Pellegrino, C., Maiorana, E. and Modena, C. (2009), "Linear and non-linear behaviour of perforated steel plates with circular and rectangular holes under shear loading", Thin.Walled. Struct., 47(6-7), 607-616. https://doi.org/10.1016/j.tws.2008.11.001
  21. Roberts, T.M. and Azizian, Z.G. (1984), "Strength of perforated plates subjected to in-plane loading", Thin. Walled. Struct., 2(2), 153-64. https://doi.org/10.1016/0263-8231(84)90009-0
  22. Shanmugam, N.E., Thevendran, V. and Tan, Y.H. (1999), "Design formula for axially compressed perforated plates", Thin. Walled. Struct., 34(1), 1-20. https://doi.org/10.1016/S0263-8231(98)00052-4
  23. Shanmugam, N.E., Lian, V.T. and Thevendran, V. (2002), "Finite element modelling of plate girders with web openings", Thin. Walled. Struct., 40(5), 443-64. https://doi.org/10.1016/S0263-8231(02)00008-3

Cited by

  1. Buckling behavior of strengthened perforated plates under shear loading vol.13, pp.4, 2012, https://doi.org/10.12989/scs.2012.13.4.367
  2. Linear buckling analysis of welded girder webs with variable thickness vol.11, pp.6, 2011, https://doi.org/10.12989/scs.2011.11.6.505
  3. Elasto-Plastic Analysis of Cylindrical Vessel with Arbitrary Material Gradation Subjected to Thermo-Mechanical Loading Via DTM vol.44, pp.10, 2011, https://doi.org/10.1007/s13369-019-03910-x