• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.2 s.314
• /
• pp.47-59
• /
• 2007

Recently, Healthcare system has not been standardized and has been developed as an embedded system lacking interoperability. We are finally going to face such problems as having excessive load in using network caused by the uncontrolled spread of system and un-guaranteed interoperability among the heterogeneous systems. We suggest the possibility that OSGi and JADE can be accepted as a solution for the above problems.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.101.2-101.2
• /
• 2012

Shocks are ubiquitous in astrophysical plasmas: bow shocks are formed by the interaction of solar wind with planetary magnetic fields, and supernova explosions and jets produce shocks in interstellar and intergalactic spaces. The global morphologies of these shocks are usually described by a set of magnetohydrodynamic (MHD) equations which tacitly assumes local thermal equilibrium, and the resulting Rankine-Hugoniot shock jump conditions are applied to obtain the relationship between the upstream and downstream physical quantities. While thermal equilibrium can be achieved easily in collisional fluids, it is generally believed that collisions are infrequent in astrophysical settings. In fact, shock widths are much smaller than collisional mean free paths and a variety of kinetic phenomena are seen at the shock fronts according to in situ observations of planetary shocks. Hence, both the MHD and kinetic equations have been adopted in theoretical and numerical studies to describe different aspects of the physical phenomena associated with astrophysical shocks. In this paper, we present the results of 3D relativistic particle-in-cell (PIC) simulations for ion-electron plasmas, with focus on the shock structures: when a jet propagates into an unmagnetized ambient plasma, a shock forms in the nonlinear stage of the Weibel instability. As the shock shows the structures that resemble those predicted in MHD systems, we compare the results with those predicted in the MHD shocks. We also discuss the thermalization processes of the upstream flows based on the time evolutions of the phase space and the velocity distribution, as well as the wave spectra analyses.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.364-370
• /
• 2008

In this paper, we proposed new sensor network architecture with autonomous robots based on beacon mode and implemented real time monitoring system in real test-bed environment. The proposed scheme offers beacon based real-time scheduling for reliable association process with parent nodes and dynamically assigns network address by using NAA (Next Address Assignment) mechanism. For the large scale multi-sensor processing, our real-time monitoring system accomplished the intelligent database processing, which can generate not only the alert messages to the civilians but also process various sensing data such as fire, air, temperature and etc. Moreover, we also developed mobile robot which can support network mobility. Though the performance evaluation by using real test-bed system, we illustrate that our proposed system demonstrates promising performance for emergence monitoring systems.

• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.169-175
• /
• 2010

Urinalysis is an important clinical test to diagnose urinary diseases, and dipstick method with visual inspection is widely applied in practice. Automated optical devices recently developed have disadvantages of long measurement time, big size and heavy weight, accuracy degradation with time, etc. The present study proposed a new computer scanning technique, in which the test strip and the standard chart were simultaneously scanned to remove any environmental artifacts, followed by automated differentiation with the minimum distance algorithm, leading to significant enhancement of accuracy. Experiments demonstrated an accuracy of 100 % in that all test results were identical with the human visual inspection. The present technique only uses a personal computer with scanner and shortens the test time to a great degree. The results are also stored and accumulated for later use which can be transmitted to remote locations through a network, thus could be easily integrated to any ubiquitous health care systems.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2014

In this paper, we propose a novel UE(User Equipment) position tracking algorithm of visible light signals, and analyze BER performance when optical beamforming scheme is applied in VLC(Visible Light Communications) system. The optical beamforming scheme as an interference mitigation method provides good optical channel conditions between UE(Rx) and LED light(Tx), and lead to better BER performance because UE is able to get a better RSSI(Received Signal strength indication) value. For the system BER, the proposed UE position tracking method for optical beamforming transmission demonstrates the performance enhancement compared to a system not applied the optical beamforming transmission scheme, and up to about 5~6dB SNR performance gain is achieved. The results of the paper can be applied to design of various VLC and LBS applications for ubiquitous home network systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.261-261
• /
• 2007

Wearable and ubiquitous micro systems will be greatly growing and their related devices should be self-powered in order to avoid the replacement of finite power sources, for example, by scavenging energy from the environment. With ever reducing power requirements of both analog and digital circuits, power scavenging approaches are becoming increasingly realistic. One approach is to drive an electromechanical converter from ambient motion or vibration. Vibration-driven generators based on electromagnetic, electrostatic and piezoelectric technologies have been demonstrated. Among various generator types proposed so far, piezoelectric generator possesses considerable potential in micro system. To overcome low mechanical-to- electric energy conversion, the piezoelectric device should activate in resonance mode in response to external vibration. Normally, the external vibration excretes at low frequency ranging 0.1 to 200 Hz, whereas the resonant frequencies of the devices are fixed as constant. Therefore, keeping their resonant mode in varying external vibration can be one of important points in enhancing the conversion efficiency. We investigated the possibility of use of multi-bender type piezoelectric devices. To match the external vibration frequency with the device resonant frequency, the various devices with different resonant frequency were chosen. Under an external vibration acceleration of 0.1G at 120 Hz, the device exhibited a peak-to-peak voltage of 2.8 V and a power of 0.5 mw in resonance mode.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.504-515
• /
• 2008

Fast transmission speeds and various wired network services have been combined with the convenience and mobility of wireless services. The combination of wired/wireless technologies is spreading rapidly since it enables the creation of new services and provides new features to both users and service providers. In such wired/wireless integrated services, network integration is very important because such systems are integrated by a linkage between heterogeneous networks and they involve an integration of transmission technologies across networks. In this situation, existing security and communication technologies are unsuitable since the network are integrated with heterogeneous networks. The network may also have several security flaws. In existing homogeneous networks, user authentication and key management between heterogeneous networks are required for these new technologies. The establishment of security technologies for heterogeneous devices is a very important task between homogeneous networks. In this paper, we propose a secure and efficient key management system for a heterogeneous network environment. Our system provides secure communications between heterogeneous network devices.

• Journal of Information Processing Systems
• /
• v.5 no.3
• /
• pp.117-130
• /
• 2009

By providing ubiquitous Internet connectivity, wireless networks offer more convenient ways for users to surf the Internet. However, wireless networks encounter more technological challenges than wired networks, such as bandwidth, security problems, and handoff latency. Thus, this paper proposes new technologies to solve these problems. First, a Security Access Gateway (SAG) is proposed to solve the security issue. Originally, mobile terminals were unable to process high security calculations because of their low calculating power. SAG not only offers high calculating power to encrypt the encryption demand of SAG's domain, but also helps mobile terminals to establish a multiple safety tunnel to maintain a secure domain. Second, Robust Header Compression (RoHC) technology is adopted to increase the utilization of bandwidth. Instead of Access Point (AP), Access Gateway (AG) is used to deal with the packet header compression and de-compression from the wireless end. AG's high calculating power is able to reduce the load on AP. In the original architecture, AP has to deal with a large number of demands by header compression/de-compression from mobile terminals. Eventually, wireless networks must offer users "Mobility" and "Roaming". For wireless networks to achieve "Mobility" and "Roaming," we can use Mobile IPv6 (MIPv6) technology. Nevertheless, such technology might cause latency. Furthermore, how the security tunnel and header compression established before the handoff can be used by mobile terminals handoff will be another great challenge. Thus, this paper proposes to solve the problem by using Early Binding Updates (EBU) and Security Access Gateway (SAG) to offer a complete mechanism with low latency, low handoff mechanism calculation, and high security.

• Journal of Intelligence and Information Systems
• /
• v.13 no.4
• /
• pp.65-78
• /
• 2007

This paper proposes a new method of weighted template matching for machine-printed numeral recognition. The proposed weighted template matching, which emphasizes the feature of a pattern using adaptive Hamming distance on local feature areas, improves the recognition rate while template matching processes an input image as one global feature. Template matching is vulnerable to random noises that generate ragged outlines of a pattern when it is binarized. This paper offers a method of chain code trimming in order to remove ragged outlines. The method corrects specific chain codes within the chain codes of the inner and the outer contour of a pattern. The experiment compares confusion matrices of both the template matching and the proposed weighted template matching with chain code trimming. The result shows that the proposed method improves fairly the recognition rate of the machine-printed numerals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2119-2124
• /
• 2008

An information-oriented basis in today's society has been changing fast, and the desire for connectivity has caused an exponential growth in wireless communication and sensor network. Sensor networks using RFID, in particular, have led this trend due to the increasing exchange of data in Ubiquitous such as the home RF, access control system, U-Healthcare, and Logistics information Systems. Also, the RFID when it applies a technique, is able to raise the stability of shipping as controling the mobile course and an entrance and exit of the crews an well as previously preventing an accident from shipping. In this paper, we designed and implemented personnel control system using UHF-RFID in vessels which shows through host PC reading and writing tag.