• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.4
• /
• pp.287-292
• /
• 2009

u-City business is IT projects and City development processor which be coupled to the city development in the planning stages, and u-City planning and design reflecting at that stages can be built efficiently, and cost savings can be. This paper study on how to link between City construction processor and u-City business processor, especially u-City business for success, the key step of the USP (u -City Strategic Planning) be studied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.699-704
• /
• 2003

This paper has been studied about the design of optical transmitter with stable output wavelength in WDM transmission system. The stabilized constant current circuit is designed with deviation less than 10$\mu$A. The temperature control circuit is constructed for the control of internal temperature of laser diode. Also, the wavelength locker is used in optical output. Finally, A/D, D/A converter and micro-processor are used for the control of these.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.561-564
• /
• 2009

This paper present design and implementation of U-city infrared image surveillance system based on the digital media processor. The hardware is designed and implemented by using commercial chips such as DM642 processor and video encoder, video decoder and the functions of software are to analyze temperature distribution of a monitoring image and to monitor disaster situation such as fire. The required functions and performances are confirmed by testing of the prototype and we verified practicality of the system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.89-95
• /
• 2008

In the maritime communication, Orthogonal Frequency Division Multiplexing (OFDM) communication terminal should be operated with low power consumption, because the communication should be accomplished in the circumstance of disaster. Therefore, Low power FFT processor is required to be designed with current mode signal processing technique than digital signal processing. Current- to-Voltage Converter (IVC) is a device that converts the output current signal of FFT processor into the voltage signal. In order to lessen the power consumption of OFDM terminal, IVC should be designed with low power design technique and IVC should have wide linear region for avoiding distortion of signal voltage. To design of one-chip of the FFT LSI and IVC, IVC should have a small chip size. In this paper, we proposed the new IVC with wide linear region. We confirmed that the proposed IVC operates linearly within 0.85V to 1.4V as a function of current-mode FFT output range of -100~100[uA]. Designed IVC will contribute to realization of low-power maritime data communication using OFDM system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.575-582
• /
• 2008

The existing patient monitoring system when the patient want own information. The patient confirm information through the medical institution. But the patient monitoring system based on the U-Healthcare, the patient always confirms own information through the mobile device including rfid reader. The patient need RFID middleware design to provide wanting service when the RFID reader read patient's tag information. The RFID middleware is consisted of RFID module, ARM processor and RS-232 interface. The RFID module is used to be inputted user information and RS-232 interface pass information by RFID middleware. Also, This system is embodied by specific patient monitoring system using embedded exclusive use ARM processor. In this paper introduces concept and action principle of RFID middleware and embodied patient monitoring system that use Qt.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1213-1216
• /
• 2003

This paper proposes an 3D graphics rendering processor for portable device. One the most important factor is chip size for portable device, but the conventional 3D graphics rendering processor is not a suitable because the processor needs a lot of multiplication and division units. So the proposed architecture substitutes single precision floating point by 32 bit fixed point, and uses recursive units for the same operation such as color values(z, r, g, b, a) and texture values (s, t, u, v). In this approach, we reduce numbers of multiplications and divisions by 66.1% and 75% respectively at the sacrifice of performance degradation by 2.12%.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.23-32
• /
• 2007

This paper proposes a reconfigurable parallel processor architecture which can efficiently implement various multimedia applications, such as 3D graphics, H.264/H.263/MPEG-4, JPEG/JPEG2000, and MP3. The proposed architecture directly connects memories and processors so that memory access time and power consumption are reduced. It supports floating-point operations needed in the geometry stage of 3D graphics. It adopts partitioned SIMD to reduce hardware costs. Conditional execution of instructions is used for easy development of parallel algorithms.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.2
• /
• pp.47-54
• /
• 1986

Hardware implementation of a 32-channel MFC digital receiver has not been easy and simple, because it requires real time processing of PCM data. In this paper, we introduce a method of designing an MFC digital receiver compactly by the channel distribution method. We have implemented the MFC digital receiver to process many cnannels by distributing channels of the TDM input data directly to the commercial digital signal processor chips(NEC uPD7720), and by carrying out the modified Goertzel Algorithm. The design of low cost, reliable, high speed, and compact MFC receiver will be shown.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.337-342
• /
• 2009

This paper describes a robust mobile u-healthcare system with multiple physiological signs measurement capability in real time with integration of WSN(wireless sensor network) technology and CDMA(code division multiple access) network. A cellular phone receives health data in WSN and performs local physiological signs analysis at a phone processor, and then transmits abnormal data to server for further detail or precise health signal evaluation by a medical doctor over a CDMA network. Physiological signs of the patients are continuously monitored, processed and analyzed locally at cellular phone process to produce useful medical information for diagnosis and tracking purposes. By local simple analysis in cellular phone processor we can save the data transmission cost in CDMA network. By using the developed integrate ubiquitous healthcare service architecture, patients can realize self-health checking so that the prevention actions can be taken earlier. Appropriate self-monitoring and self-management can cure disease and relieve pain especially for patients who suffer from chronic diseases that need long term observation.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1503-1506
• /
• 1987

This paper proposes the self test method for 16 point FFT processor with systolic array architecture. To test efficiently and solve the increased hardware problems due to built-in self test, we change the normal registers into Linear Feedback Shift Registers(LFSR). LFSR can be served as a test pattern generator or a signature analyzer during self test operation, while LFSR a ordering register or a accumulator during normal operation. From the results of logic simulation for 16 point FFT processor by YSLOG, the total time is estimated in about. 21.4 [us].