• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.546-554
• /
• 1996

Vscularized calvarial bone flaps have been useful tools in the reconstuction of different type of bone defects in craniofacial surgery Vascularized bone transfer are often preferred to nonvascularized bone grafts because nonvascularized bone grafts are less resistant to infection, not as mechanically strong, and do not survive well in a poorly vascularized bed. Potential advantages of vascularized outer table calvarial bone flap include proximity to the operative field, membranous origin similar to that of the facial skeleton, maleability which allows for a variety of shapes and sizes, inconspicous donor sit scar. The following are the case reports of two patients who underwent craniofacial reconstruction suing vascularized outer table calvarial bone flap.

• Molecules and Cells
• /
• v.28 no.4
• /
• pp.389-395
• /
• 2009

We previously observed that the transcription of some flagellar genes decreased in Salmonella Typhimurium tdcA mutant, which is a gene encoding the transcriptional activator of the tdc operon. Since flagella-mediated bacterial motility accelerates the invasion of Salmonella, we have examined the effect of tdcA mutation on the invasive ability as well as the flagellar biosynthesis in S. Typhimurium. A tdcA mutation caused defects in motility and formation of flagellin protein, FliC in S. Typhimurium. Invasion assays in the presence of a centrifugal force confirmed that the defect of flagellum synthesis decreases the ability of Salmonella to invade into cultured epithelial cells. In addition, we also found that the expression of Salmonella pathogenicity island 1 (SPI1) genes required for Salmonella invasion was down-regulated in the tdcA mutant because of the decreased expression of fliZ, a positive regulator of SPI1 transcriptional activator, hilA. Finally, the virulence of a S. Typhimurium tdcA mutant was attenuated compared to a wild type when administered orally. This study implies the role of tdcA in the invasion process of S. Typhimurium.

• Molecules and Cells
• /
• v.22 no.2
• /
• pp.146-153
• /
• 2006

Cell polarity is critical for the division, differentiation, migration, and signaling of eukaryotic cells. RAX2 of budding yeast encodes a membrane protein localized at the cell cortex that helps maintain the polarity of the bipolar pattern. Here, we designate SPAC6f6.06c as $rax2^+$ of Schizosaccharomyces pombe, based on its sequence homology with RAX2, and examine its function in cell polarity. S. pombe $rax2^+$ is not essential, but ${\Delta}rax2$ cells are slightly smaller and grow slower than wild type cells. During vegetative growth or arrest at G1 by mutation of cdc10, deletion of $rax2^+$ increases the number of cells failing old end growth just after division. In addition, this failure of old end growth is dramatically increased in ${\Delta}tea1{\Delta}rax2$, pointing to genetic interaction of $rax2^+$ with $tea1^+$. ${\Delta}rax2$ cells contain normal actin and microtubule cytoskeletons, but lack actin cables, and the polarity factor for3p is not properly localized at the growing tip. In ${\Delta}rax2$ cells, and endogenous rax2p is localized at the cell cortex of growing cell tips in an actin- and microtubule-dependent manner. However, ${\Delta}rax2$ cells show no defects in cell polarity during shmoo formation and conjugation. Taken together, these observations suggest that rax2p controls the cell polarity of fission yeast during vegetative growth by regulating for3p localization.

• Journal of Korea Trade
• /
• v.24 no.8
• /
• pp.39-62
• /
• 2020

Purpose - Korean exports account for a vast proportion of Korean GDP, and large volumes of Korean products are sold in the United States. Identifying and characterizing actual and potential product hazards related to Korean products is critical to safeguard Korean export trade, as severe quality issues can impair Korea's reputation and reduce global consumer confidence in Korean products. In this study, we develop country-of-origin-based product risk analysis methods for social media with a specific focus on Korean-labeled products, for the purpose of safeguarding Korean export trade. Design/methodology - We employed two social media datasets containing consumer-generated product reviews. Sentiment analysis is a popular text mining technique used to quantify the type and amount of emotion that is expressed in the text. It is a useful tool for gathering customer opinions regarding products. Findings - We document and discuss the specific potential risks found in Korean-labeled products and explain their implications for safeguarding Korean export trade. Finally, we analyze the false positive matches that arise from the established dictionaries that were used for risk discovery and utilize these classification errors to suggest opportunities for the future refinement of the associated automated text analytic methods. Originality/value - Various studies have used online feedback from social media to analyze product defects. However, none of them links their findings to trade promotion and the protection of a specific country's exports. Therefore, it is important to fill this research gap, which could help to safeguard export trade in Korea.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.9
• /
• pp.57-64
• /
• 2019

Due to the rapid increase of the elderly population, promoted desire for recreational activities in old age and so emerging importance of Leisure welfare facilities for the elderly. Although Senior community centers playing an important role in old people leisure life are quantitative resources occupying majority of the Leisure welfare facilities for the elderly. there are many problems of managing programs, aging facilities, small spaces and so on. So, many facilities are used as simple meeting places of old people without solution about qualitative problem. Also, because of negative perceptions of people about Senior community center socially, desires of using Senior community center of old generation will decrease. In order to perfectly play a role of Leisure welfare facilities for the elderly, we need to review regulations about facility and program of Senior community center and suggest ways to resolve these problems. According to these necessity, Integration senior community centers appeared as a new concept. These centers compensate the physical defects through integrating small Senior community center. Through dividing function and service of senior welfare and forming networks between Senior community center and Senior welfare center, these centers set a goal of increasing quantitative and qualitative improving of leisure life of old people.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.1
• /
• pp.149-163
• /
• 2021

Objectives This study is to review the effectiveness of exercise after lung cancer surgery. Methods Relevant randomized controlled trials (RCTs) were searched in PubMed database. The systematic review was conducted through flow diagram. The risk of biases were assessed through the Cochrane guideline. Characteristics and outcomes were extracted from each study. Meta-analyses of forced expiratory volume in one second (FEV1), 6-minute walk test (6MWT), quality of life (QoL), pulmonary complications were conducted. Results 14 RCTs were selected. In meta-analysis, exercise improved FEV1 (mean difference [MD] 0.14; 95% confidence interval [CI] 0.04 to 0.25; p=0.009; I2=55%) and mean change of FEV1 (MD 0.11; 95% CI 0.02 to 0.20; p=0.02; I2=0%). Exercise increased the distance of 6MWT, but there was considerable heterogeneity (MD 45; 95% CI 21.16 to 68.83; p=0.0002, I2=89%). There was no differences in QoL scores by 2 questionnaires (European Organisation for Research and Treatment of Cancer quality of life questionnaire, short form-36). Exercise reduced the duration of hospital stay (MD -3.32; 95% CI -5.27 to -1.36; I2=0%; 2 studies) but not duration of chest tube intubation (MD -1.37; 95% CI -2.81 to 0.06; I2=0%) and incidence of pulmonary complications (pooled risk ratio 0.54; 95% CI 0.23 to 1.30; I2=0%). Conclusions Exercise might reduce the duration of hospital stay after lung surgery. There was not enough evidence to prove improvement of lung function, aerobic capacity, muscle strength, QoL, and decline of pulmonary complications. Low-quality risk of bias, different units or estimation of outcome, different exercise type and duration, heterogeneity among studies make the evidence of effectiveness weak. Future researches are required to redeem these defects.

• Journal of Radiation Protection and Research
• /
• v.49 no.1
• /
• pp.29-39
• /
• 2024

Background: The gamma emission tomography (GET) device has been reported a reliable technique to inspect partial defects within spent nuclear fuel (SNF) of pin-by-pin level. However, the existing GET devices have low accuracy owing to the high attenuation and scatter probability for SNF inspection condition. The purpose of this study is to design and optimize a Yonsei single-photon emission computed tomography version 2 (YSECT.v.2) for fast inspection of SNF in water storage by acquisition of high-quality tomographic images. Materials and Methods: Using Geant4 (Geant4 Collaboration) and DETECT-2000 (Glenn F. Knoll et al.) Monte Carlo simulation, the geometrical structure of the proposed device was determined and its performance was evaluated for the ¹³⁷Cs source in water. In a Geant4-based assessment, proposed device was compared with the International Atomic Energy Agency (IAEA)-authenticated device for the quality of tomographic images obtained for 12 fuel sources in a 14 × 14 Westinghouse-type fuel assembly. Results and Discussion: According to the results, the length, slit width, and septal width of the collimator were determined to be 65, 2.1, and 1.5 mm, respectively, and the material and length of the trapezoidal-shaped scintillator were determined to be gadolinium aluminum gallium garnet and 45 mm, respectively. Based on the results of performance comparison between the YSECT.v.2 and IAEA's device, the proposed device showed 200 times higher performance in gamma-detection sensitivity and similar source discrimination probability. Conclusion: In this study, we optimally designed the GET device for improving the SNF inspection accuracy and evaluated its performance. Our results show that the YSECT.v.2 device could be employed for SNF inspection.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.2
• /
• pp.105-112
• /
• 2013

The application of contra-rotating rotors for higher specific speed pump has been proposed in our studies, which is in principle effective for reducing the rotational speed and/or the pump size under the same specification of conventional axial flow pump. In the previous experiments of our prototype, the cavitation inception at the tip region of the rear rotor rather than that of the front rotor and the strong potential interaction from the suction surface of the rear rotor blade to the pressure surface of the front one were observed, indicating the possibility to further improve the pump performance by optimizing rotational speed combination between the two rotors. The present research aims at the design of rear rotor with lower rotational speed. Considering the fact that the incoming flow velocity defects at the tip region of the rear rotor, an integrated inflow model of 'forced vortex' and 'free vortex' is employed. The variation of maximum camber location from hub to tip as well as other related considerations are also taken into account for further performance improvement. The ideas cited above are separately or comprehensively applied in the design of three types of rear rotor, which are subsequently simulated in ANSYS CFX to evaluate the related pump performance and therefore the whole low speed design idea. Finally, the experimental validation is carried out on one type to offer further proofs for the availability of the whole design method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6727-6731
• /
• 2013

Homologous recombination (HR) repair has a crucial role to play in the prevention of chromosomal instability, and it is clear that defects in some HR repair genes are associated with many cancers. To evaluate the potential effect of some HR repair gene polymorphisms with differentiated thyroid carcinoma (DTC), we assessed Rad51 (135G>C), Rad52 (2259C>T), XRCC2 (R188H) and XRCC3 (T241M) polymorphisms in Iranian DTC patients and cancer-free controls. In addition, haplotype analysis and gene combination assessment were carried out. Genotyping of Rad51 (135G>C), Rad52 (2259C>T) and XRCC3 (T241M) polymorphisms was determined by PCR-RFLP and PCR-HRM analysis was carried out to evaluate XRCC2 (R188H). Separately, Rad51, Rad52 and XRCC2 polymorphisms were not shown to be more significant in patients when compared to controls in crude, sex-adjusted and age-adjusted form. However, results indicated a significant difference in XRCC3 genotypes for patients when compared to controls (p value: 0.035). The GCTG haplotype demonstrated a significant difference (p value: 0.047). When compared to the wild type, the combined variant form of Rad52/XRCC2/XRCC3 revealed an elevated risk of DTC (p value: 0.007). It is recommended that Rad52 2259C>T, XRCC2 R188H and XRCC3 T241M polymorphisms should be simultaneously considered as contributing to a polygenic risk of differentiated thyroid carcinoma.

• Journal of Welding and Joining
• /
• v.24 no.1
• /
• pp.56-63
• /
• 2006

The characteristics of $CO_2$ or Nd:YAG laser welded 600MPa ade TRIP steel was investigated. He or Ar gas was used as a shield gas in case of $CO_2$ laser welding, but the shield gas was not used in case of Nd:YAG laser welding. Bead on plate welding was performed with various welding conditions. Defects in the joints of both welding type occurred at 1.8m/min but were not observed over the welding speed of 2.1m/min in case of Nd:YAG laser welding. However, porosity occurred in $CO_2$ laser welding and the tendency of decreasing with the increase of welding speed. The hardness was the highest at heat affected zone near fusion zone as well as at the fusion zone and decreased on approaching the base metal. In a perpendicular tensile test to the weld line, all specimens that have been welded at optimum conditions were fractured at the base metal, and the tensile properties showed the rather higher than those of raw material. In a parallel tensile test, the strength of the joints was higher than that of the base metal. Elongation was found to be lower than that of the raw material. Forming height by Erichsen test and elongation were deeply related with the ratio of base metal/weld metal and the maximum hardness of the weld metal. Also porosity induced to decrease the strength and the elongation. The maximum formability was recorded at approximately 80% as compared with that of the raw material with the optimum condition.