• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.81-91
• /
• 2012

The purpose of this study was to analyze judicial precedents related on landscape construction defects(JPLCD) and suggested the improvement plan for dealing with it. The results are as the following: 1. Landscape construction defects litigations have been increased so far since 2000 and the duration of original trial was approximately 603 days, while appeal trials took up to 550 days. Therefore, the analysis revealed that settlement of disputes were lengthy and wasteful to consumers and constructors. 2. Judgement's cost accepted by the judge was only 53.6% of appraisal's cost appraised by appraiser, therefore it revealed appraiser overestimated the repair cost of landscape construction defects. 3. According to work classification categorized by Landscape Construction Standard Specification(2008) of the Korean Institute of Landscape Architecture, landscape planting amounted to 75% of JPLCD and plaintiff(consumers)'s prevailing rate of it reached 77% to be a serious burden to constructors. 4. According to JPLCD categorized by the type of dispute, defects caused by consumer's negligence for maintenance amounted to 29% and defendant(constructors)'s prevailing rate of it reached 64% to be the main responsibility of consumers. Further study will be required to make the judge standard of landscape construction defects through legal and technical research.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.2
• /
• pp.139-148
• /
• 1999

Since Nakayama's first report about venous flap, many experimental and clinical studies were done about this new type of flap. And due to its various benefits, its applications as arterialized venous free flap type have increased recently. In this study we have attempted to reconstruct composite of defects of the hand with new modification of arterialized venous free flap and simultaneous reconstruction of skin, nerve, tendon were performed successfully. From 1994 to 1999, the defects of the hands in 35 patients were reconstructed with various modifications of arterialized venous free flaps. The range of age was from 19 to 55 years and size of flap ranged from $1{\times}2cm\;to\;14{\times}9cm$. Among them, 12 cases of flap over 20cm in size were included. Indications of flaps were as follows: resurfacing of the defects of the skin (9 cases), simultaneous reconstruction of extensor, skin and digital nerve(2 cases), reconstruction of the skin with extensor(5 cases), as a flap-through type vascular reconstruction(6 cases), for digital nerve reconstruction(2 cases), contracture release(3 cases), and finger tip reconstruction(9 cases). All of the cases except one survived with marginal skin necrosis less than 10%. And relatively large flaps over 20cm in size successfully survived without any delay procedures. Composite reconstructions including tendon and nerve were successful with new modifications of this flap. Arterialized venous free flap is one of the useful procedure in reconstruction of the hand because it has many advantages such as non-bulky and good quality of flap, variable length of pedicle, preservation of major vascular pedicle, less operation time, single operative field and in addition possibility of various modifications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.377-377
• /
• 2010

The $AgInS_2$ epilayers with chalcopyrite structure grown by using a hot-wall epitaxy (HWE) method have been confirmed to be a high quality crystal. After the as-grown $AgInS_2$/GaAS was annealed in Ag-, S-, and In-atmosphere, the origin of point defects of the $AgInS_2$/GaAs has been investigated by using the photoluminescence (PL) at 10 K. The native defects of $V_{Ag}$, $V_s$, $Ag_{int}$, and $S_{int}$ obtained from PL measurement were classified to donors or acceptors type

• Journal of Chest Surgery
• /
• v.19 no.2
• /
• pp.232-237
• /
• 1986

The intraventricular conduction disturbances have been documented after correction of ventricular septal defects by any surgical route but debated its etiology. And so the frequency of conduction disturbances following right ventriculotomy, right atriotomy and pulmonary arteriotomy for closure of ventricular septal defects was compared in various conditions. The present series consists of 218 patients with ventricular septal defects. They had the surgical repair at the Seoul National University Hospital from January 1983 to October 1984. Conduction disturbances were studied with conventional 12 leads electrocardiogram. Of the 218 VSD`s 139 patients were repaired via vertical right ventriculotomy, 45 patients via right atriotomy, 34 patients via pulmonary arteriotomy. 1] Of 218 patients the frequency of RBBB was 26.1% and the frequency of RBBB + LAH was 6.0%. 2] There is no statistical difference between right ventriculotomy group [30.2%] and right atriotomy group [24.4%]. But there is significant difference between right ventriculotomy group and pulmonary arteriotomy group [11.8%] [P<0.05]. 3] In respect to anatomical classification by Kirklin`s method, the frequency of RBBB was higher in type II [32.1%] than in type I [14.9%]. [P<0.05] But in each anatomical type, there is no influence of the various surgical approach on the incidence of postoperative RBBB. 4] The frequency of RBBB was 31.8% in patch closure group and 14.3% in direct closure group. [P<0.05] Although the result suggests that there is no significant difference in various surgical approaches on the incidence of postoperative conduction disturbances, it may be reduced by a new-ventricular approach or a limited incision at right ventricular outflow tract in right ventricular approach.

• Journal of the Korea Society for Simulation
• /
• v.11 no.3
• /
• pp.49-58
• /
• 2002

It takes 2 or 3 months to manufacture memory device. Defect has to exist owing to hundreds of processes. If there are too many defects, the memory has to be rejected. But if there are a few defects, it will be more efficient and cost reducing for the company to use it by repairing. Therefore, laser-repair process is needed for such a reason and redundancy analysis is needed to establish correct target of laser-repair process. The equipment development company had provided the redundancy analysis and each development company had developed and provided separately. So, to analyze the similar type of defects, redundancy analysis time can be very different by the manufacture. The purpose of this research is to strengthen the competitive price and to apply correlation concept in business for reducing the redundancy analysis time to repair the defects

• Journal of Chest Surgery
• /
• v.8 no.1
• /
• pp.69-74
• /
• 1975

Twenty-nine cases of ventricular septal defect operated in this department during the period from 1969 to May 1975 were presented. Out of 29 cases, there were 20 cases of type II defects, 8 cases of type I, and one case of type III, and the last case was multiple defect. The anomalies associated with ventricular septal defect were eight in all; three patent ductus arteriosus, one atrial septal defect, one tricuspid insufficiency and an aortic insufficiency. Over all mortality was 17%. The causes of death were complete heart block in a case, respiratory distress due to excessive administration of morphine in one, low cardiac output in two and perforation of the aortic annulus after repair of the ventricular septal defect associated with aortic insufficiency.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.647-652
• /
• 2004

In aqueous tape casting of alumina slurry systems, the relationships between the suspension compositions and the defects of the dried tapes were discussed. The suspensions compositions were controlled with the ratios of the solids, water and organics binder contents. The effects of the thickness of dried tape and kinds of binder system were also examined. In the defect free region, the apparent viscosity showed nearly same value due to the count balancing effect of solid and organic binder content on the apparent viscosity. When water content was constant, increasing solid led to decrease of organic binder content. The defect free region was narrowed with increasing of casting thickness. When linear type acrylic emulsion binders system (D1000 and D 1035) were used, defect free zone formed the belt type in the triangle of solid, water and organic binder content according to the line of constant water contents. However the defect free region was not found in the cross-link type emulsion binder system (D 1050).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.277-278
• /
• 2023

The need for maintenance of bridge infrastructure is increasing due to aging, and the cost of maintaining the infrastructure must be calculated for effective budget distribution. Therefore, in this study, representative defects according to bridge superstructure type are derived to calculate the cost for each repair method. First of all, the representative bridges, PSCI girder bridge, Rahmen bridge, Steel box girder bridge, and RC slab bridge, were selected as superstructures using BMS data, and repair methods for defects were presented. In addition, the cost of the repair method by superstructure type was compared. This result is expected to predict total maintenance costs in consideration of the maintenance cycle.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.419-427
• /
• 2023

In this study, optimal adhesion conditions to alleviate defects caused by heat shrinkage with FDM type 3D printers with machine learning are researched. Machine learning is one of the "statistical methods of extracting the law from data" and can be classified as supervised learning, unsupervised learning and reinforcement learning. Among them, a function model for adhesion between the bed and the output is presented using supervised learning specialized for optimization, which can be expected to reduce output defects with FDM type 3D printers by deriving conditions for optimum adhesion between the bed and the output. Machine learning codes prepared using Python generate a function model that predicts the effect of operating variables on adhesion using data obtained through adhesion testing. The adhesion prediction data and verification data have been shown to be very consistent, and the potential of this method is explained by conclusions.

• 한국터널공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.292-298
• /
• 2005

Tunnel in subway should be designed as a water-proof type tunnel as much as possible but it is difficult to make it come true due to several facts, such as construction technique and cost. A drainage type tunnel as a substitute of a water-proof tunnel lead to the increase of water pressure on the concrete lining that make bad effect to tunnel structure when it has some problem to operate the drainage system. Throughout studying about cases on defects of tunnel drainage in subway We hope it contributes to tunnel maintenance.