• Journal of Ocean Engineering and Technology
• /
• v.26 no.6
• /
• pp.66-73
• /
• 2012

A pressure compensated chamber of a pilot mining robot isolates and protects an electrical-electronic system from the ambient highly pressured water. Since the inner pressure of the chamber is compensated with outer water pressure using hydraulic oil and pressure compensator, there exists a pressure difference, less than 1 bar, between outer and inner surface. The structural safety of the chamber is obtained relatively easier than the canister type which inner pressure is kept as the atmospheric pressure. However, due to the adoption of box shape for space efficiency and usage of the transparent engineering plastic viewport for checking inner circumstance, the viewport can be largely deformed. This large deformation can cause an additional tensile force, called the prying force, to the bolt-flange connection parts of the viewport. In this paper, we suggest the structural design equation considering the prying action for designing the structure of a box-shape pressure compensated chamber.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.321-324
• /
• 1996

Sr1+xSm1-xFeO4-y solid solutions with a composition range 0.00 ≤x≤1.00 have been prepared at 1200 ℃ in air under normal atmospheric pressure. All the solutions exhibit the K2NiF4-type structure of tetragonal system. Mohr salt analysis shows that the mole ratio of Fe4+ ion to Fe3+ ion or the τ value increases with the x value. Nonstoichiometric chemical formulas have been formulated from the x, τ, and y values. Electrical conductivity was measured in the temperature range of 173-373 K under atmospheric air pressure. The conductivities of each sample are varied within the semiconductivity range. The conductivity at constant temperature increases steadily with x value and activation energies are varied from 0.14 to 0.32 eV. The conduction mechanism of the ferrite system may be proposed as a hopping model of conduction electrons between the mixed valence states. The Mossbauer spectrum for the composition of x=0.00 shows a six line pattern by which the existence of Fe3+(I.S.=0.32 mm/sec) can only be identified. The spectra for the compositions of x=0.50 and 1.00 presents broad single line patterns showing a mixed valence state.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.582-582
• /
• 2013

Oxide TFT (thin film transistor) active channel layer에 대한 저온 열처리 공정은 투명하고 flexibility을 기반으로하는 display 산업과 AMOLED (active matrix organic light emitting diode) 분야 등 다양한 분야에서 필요로 하는 기술로서 많은 연구가 이루어지고 있다. 과거 active layer는 ALD (atomic layer deposition), CVD (chemical vapor deposition), pulse laser deposition, radio frequency-dc (RF-dc) magnetron sputtering 등과 같은 고가의 진공 장비를 이용하여 증착 되어져 왔으나 현재에는 진공 장비 없이 spin-coating 후 열처리 하는 저가의 공정이 주로 연구되어 지고 있다. Flexible 기판들은 일반적인 OTFT (oxide thin films Transistor)에 적용되는 열처리 온도로 공정 진행시 열에 의한 기판의 손상이 발생한다. Flexible substrate의 열에 의한 기판 손상을 막기 위해 저온 열처리 공정이 연구되고 있지만 기존 열처리와 비교하여 소자의 특성 저하가 동반 되었다. 본 연구에서는 Si 기판위에 SiO2 (100)를 절연층으로 증착하고 그 위에 IZO (indium zinc oxide) solution을 spin-coating 한뒤 $250^{\circ}C$ 이하의 온도에서 열처리하였다. 저온 공정으로 인하여 소자의 특성 저하가 동반 되었으므로 소자의 저하된 특성 복원하고자 post-treatment로 고가의 진공장비가 필요 없고 roll-to roll system 적용이 수월한 remote-type의 APP (atmospheric pressure plasma) 처리를 하였다. Post-treatment로 APP를 이용하여 $250^{\circ}C$ 이하에서 소자에 적용 가능한 on/off ratio를 얻을 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.261-262
• /
• 2011

본 연구는 HMDS/$O_2$/He/Ar의 gas mixture를 이용하여 remote-type의 DBD source를 통한 APPECVD를 통한 SiOx 양질의 무기막 증착 공정을 개발하였다. 이때 기판에 바이어스를 인가 하거나 혹은 접지를 하여 대기압 플라즈마의 환경 내에서도 바이어스 효과를 확인할 수 있도록 double discharge system을 구축하였다. 그리고 이 double discharge system의 다양한 특성과 기존의 전형적인 DBD와 비교 하였을 때 어떠한 차이점을 가지는지에 대해서도 관찰하였다. 그리하여 전형적인 DBD system과 double discharge를 통해 증착된 SiOx 무기막의 특성을 역시 비교 관찰하였다. Gas mixture 중 HMDS의 유량이 증가함에 따라, 그리고 $O_2$ gas의 유량이 감소함에 따라 SiOx 무기막의 증착률은 감소하였다. 그러나, SiOx 무기막 내의 불순물들, 예를 들어, carbon 혹은 hydrogen 계열의 chemical bond에 대한 정성적인 양은 HMDS 의 유량이 증가하거나 혹은 $O_2$ gas의 양이 감소함에 따라 오히려 증가함을 관찰할 수 있었다. 그리고 기판에 바이어스를 인가하는 double discharge system을 사용하였을 경우, 같은 HMDS, $O_2$ gas 유량을 사용한 전형적인 DBD type의 증착 공정 보다 더 높은 공정 효율을 나타냄과 동시에 더 낮은 불순물 함량을 가짐을 알 수 있었다. 이러한 double discharge system을 통해 증착된 양질의 SiOx 무기막이 증착 되었음을 FT-IR을 통한 막질 분석을 통해 확인 할 수 있었다. 이러한 double discharge system의 증착 공정에 대한 긍정적인 효과들은 atmospheric discharge의 효율 향상에 따른 gas dissociation efficiency 증가와 이를 통한 HMDS 분해 및 산소와의 recombination 효율의 증가에 따른 결과로 사료된다.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.391-394
• /
• 2001

A new type plasma reactor is proposed to decompose CF4 diluted with N2 gas in atmospheric pressure. The arc plasmas is surrounded with a waterwall which acts as a source of water vapor, the solvent of HF, resultant product after decomposition, and conveyer to take away fluorine compound from exhaust gas. Abatement more than 99% is achieved by small size plasmas such as 1 cm in diameter, 25cm in length and 3.4KW of DC discharge power in such gas as the mixture of 100 sccm of CF4 and 15 slm of N2. Reactors of this type are to be expanded to such a system as Nitrogen flow of 50 slm with 200 sccm of CF4 and 7-8 KW discharge power.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.72-81
• /
• 2009

This paper presents quasi-resonant type high power factor ac power supply for atmospheric pressure plasma cleaning system adopting three phase PFC boost converter and it's control method. The presented ac power supply consists of single phase H-bridge inverter, step-up transformer for generating high voltage and three phase PFC boost converter for high power factor on source utility. Unlikely to the traditional LC resonant converter, the propose one has an inductor inside only. A single resonant takes place through the inside inductor and the capacitor from the plasma load modeled into two series capacitor and one resistance. The quasi-resonant can be achieved by cutting the switching signal when the load current decrease to zero. To obtain power control ability, the propose converter controlled by two control schemes. One is the changing output pulse period scheme in the manner of PFM(Pulse Frequency Modulation) control. On the other, to provide more higher power to load, the DC rail voltage is directly controlled by the 3-phase PFC boost converter. The significant merits of the proposed converter are the uniform power providing capability for high quality plasma generation and low reactive power in AC and DC side. The proposed work is verified through digital simulation and experimental implementation.

• Journal of Powder Materials
• /
• v.11 no.3
• /
• pp.210-216
• /
• 2004

The possibility to decrease agglomeration of Cu nano powders and their separation during pulsed wire evaporation (PWE) process was investigated by controlling the working gas system, i.e., the design of the gas path, the type and pressure of the atmospheric gas. As a result, it was possible to choose the optimal design of the gas path providing large specific surface area and high degree of separation of the synthesized Cu nano powders. It was also shown that an Ar+10∼50$N_2$ mixture can be used in production of Cu nano powders, which do not react with nitrogen.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.237-243
• /
• 2012

In this paper, an atmospheric effect of repetitive measurements of X-band (9.65 GHz) arc-rail type GB-SAR (ArcSAR) system was quantitatively analyzed. Four artificial triangular trihedral corner reflectors as stationary targets for getting stable back scattered signal during 43 hours continually. The results of the analysis showed that the phase of those stationary targets had changed maximum of 5 radian (12.4 mm) and total RMS error had was 1.62 radian (4 mm) during 65 repeated measuring time. The refractive index of air which was calculated using the temperature;humidity and pressure of atmosphere showed very close relationship with the phase difference. We could check the atmospheric correction was fulfilled by the correction of an atmospheric effect using refractive index during the selected 16 hours period showed that RMS error was dropped from 1.74 radian (4.3 mm) to 0.10 radian (0.24 mm).

• Atmosphere
• /
• v.32 no.4
• /
• pp.353-365
• /
• 2022

This paper evaluates precipitation forecast skill of Global/Regional Integrated Model system (GRIMs) over South Korea in a boreal winter from December 2013 to February 2014. Three types of precipitation are classified based on development mechanism: 1) convection type (C type), 2) low pressure type (L type), and 3) orographic type (O type), in which their frequencies are 44.4%, 25.0%, and 30.6%, respectively. It appears that the model significantly overestimates precipitation occurrence (0.1 mm d^-1) for all types of winter precipitation. Objective measured skill scores of GRIMs are comparably high for L type and O type. Except for precipitation occurrence, the model shows high predictability for L type precipitation with the most unbiased prediction. It is noted that Equitable Threat Score (ETS) is inappropriate for measuring rare events due to its high dependency on the sample size, as in the case of Critical Success Index as well. The Symmetric Extreme Dependency Score (SEDS) demonstrates less sensitivity on the number of samples. Thus, SEDS is used for the evaluation of prediction skill to supplement the limit of ETS. The evaluation via SEDS shows that the prediction skill score for L type is the highest in the range of 5.0, 10.0 mm d^-1 and the score for O type is the highest in the range of 1.0, 20.0 mm d^-1. C type has the lowest scores in overall range. The difference in precipitation forecast skill by precipitation type can be explained by the spatial distribution and intensity of precipitation in each representative case.

• Atmosphere
• /
• v.33 no.1
• /
• pp.49-59
• /
• 2023

Blocking refers to a class of weather phenomena appearing in the mid and high latitudes, whose characteristics are blocked airflow of persistence. Frequently found over the Pacific and Atlantic regions of the Northern Hemisphere, blocking affects severe weather in the surrounding areas with different mechanisms depending on the type of blocking patterns. Along with lots of studies about persistent weather extremes focusing on the specific types of blocking, a new categorization using Rossby wave breaking has emerged. This study aims to apply this concept to the classification of blockings over the Pacific and examine how different wave breakings specify the associated cold weather in the Korean peninsula. At the same time, we investigate a strongly developing ridge around the Pacific by designing a new detection algorithm, where a reversal method is modified to distinguish ridge-type blocking patterns. As result, Kamchatka blocking (KB) and strong ridge over the Central Pacific are observed the most frequently during 20 years (2001~2020) of the studied period, and anomalous low pressures with cold air over the Korean Peninsula are accompanied by blocking events. When it considers the Rossby wave breaking, cyclonic wave-breaking is dominant in KB, which generates low-pressure anomalies over the Korean Peninsula. However, KB with anticyclone wave breaking appears with the high-pressure anomalies over the Korean Peninsula and it generates the warm temperature anomaly. Lastly, the low-pressure anomalies are also generated by the strong ridge over the Central Pacific, which persists for approximately three days and give a significant impact on cold surge on the Korean Peninsula.