• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.220-224
• /
• 2009

The authors have investigated the acoustic field analysis using the Constrained Interpolation Profile(CIP) Method recently proposed by Yabe. The present study has examined the calculation accuracy of the three-dimensional (3-D) acoustic field analysis using the type-M CIP method. In this paper we show phase error of type-M CIP method and the dependence on the wave-propagation direction in the type-M CIP acoustic field analysis, and then demonstrate that it is effective for acoustic field analysis, compared with the FDTD and the exact solution. We show the dependency on the propagation angle in the CIP acoustic field analysis.

• KIEAE Journal
• /
• v.8 no.4
• /
• pp.11-18
• /
• 2008

This research case-study places are chosen Seoul Metropolitan City and Yong-In City where the distinction characteristics of outdoor spaces are introduced in Apartment Complex. In this study, the standard of waterscape facilities will be set through preliminary researches and detail design factors are prepared for each characteristics. Analyze and research the characteristics of design factors through the field research of places. The Group data from Cluster Analysis, which is about waterscape facilities, is analyzed and classified by types of waterscape facilities in common residence. and then each type of characteristics and representatives of waterscape facilities founded. Waterscape facilities are charactered in 4 main types. I Type is appeared to the natural artificially mountain stream, slope and a rest space type, and feelings type. This type has twenty sites. II Type is appeared to the fewest sites(11 sites). This type is appeared to the Eco-pond, Border planting next to the waterscape facilities. III Type is appeared to the largest sites(28 sites), that is, play style water facilities of no-plantation patterns. IV Type is appeared to the retaining wall type, the rest space of bench type. Research result led, detailed plan element 64 are selected with design elements Seoul Metropolitan City and the Yong-In City at the time of the fact that well is only reflected commonly from external spaces, the type by quality which leads a statistical analysis the type quality was well reflected relatively was judged.

• Journal of Distribution Science
• /
• v.12 no.12
• /
• pp.65-73
• /
• 2014

Purpose - Distribution of agricultural products is collapsing due to recent changes in the environment balance between retailers and producers. Further, the increase in the imports of agricultural products due to free trade has caused revenue problems for producers. Agricultural producers are faced with increasing difficulties, and the organized producing center's importance is growing each day. Korean organized producing centers' policies have been conducted since 2000, and have thus been sustained for more than 10 years. Organizing a producing center's business is focused on agricultural cooperative and farming association corporation this has already have been carried out. In addition, it has achieved significant results through these organizations, but it still has many problems. Research design, data, and methodology - Organized producing centers were classified for each type. The survey covered 90 organizations, based on factor analysis, analysis of balance, and logistic regression analysis. The results of the conducted factor analysis are as follows. Production, marketing, human resources management, organizational skills, post management, safety, and scale were classified as the seven kinds of factors. These are the factors that affect the organized producing centers through the variance analysis and logistic regression analysis. The purpose of such research and analysis is to suggest the direction for the future organized producing centers' policies. Result - Results of the analysis of the variance are listed below. Items by type, production, marketing, human resource management, and organizational skills are shown to depict differences between the factors. Organization form results show that production and marketing showed a difference between the factors. The size of the organization, production, and marketing showed the difference between the factors. The factors affect organized producing centers differently depending on the type shown, as seen from the results. In contrast, the logistic regression results of the analysis are as follows. Considering the results by the type of item, and the horticulture type of marketing, human resource management has a (+) influence. Grain type and production showed a (+) influence. New types of income affecting organizational skills have a (+) influence. Considering the results for each type of organization, the agricultural cooperative type of marketing and human resource management have (+) influence. Farming association corporation type of production has a (+) influence. As a result, the size of the organization is as follows. Large organizations are production, expressed in marketing with a (+) impact. Medium-size organizations are expressed with their size factor having a (+) impact. Small organizations are expressed with a safety factor having a (+) impact. Conclusions - The types of factors display different effects. One factor is that the type of a (+) represents the influence of other factors (-) as per factor symptomatology. Therefore, the type of measures to organize a strategy to maximize the benefits of your organization should be pursued. In addition, based on the support for small organizations, improving the quality of the producer organization should be considered.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.569-578
• /
• 2017

The purpose of this study is to analyze the lower body shape of varus-typed elderly women. This study intentionally collected elderly women at age 65 years or older who seemed to have a lower body shape of varus-type, and the data of 100 women were used for final analysis. The results are as follows. Elderly women with a lower body shape of varus-type were shorter than regular elderly women and had small circumference and weak lower body. To classify the body shapes, factor analysis was conducted which drew a total of 3 factors, with 74.11% of accumulative variance. Cluster analysis was performed according to factor analysis and the body shapes were divided into 3 types. Type 1 was a body shape with the most severe varus-type that had small measured values of height and the highest BMI. Type 2 was a group of women with a large build with a relatively small tendency of varus-type. Type 3 was a group of women who were not obese, had long lower bodies, and varus-type with small circumference, which were similar to Type 1. Therefore, this study on the body shape is expected to be used as a basic data for the development of the clothes for straightening the varus-typed lower body shape in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5117-5122
• /
• 2011

In this paper, thermal analysis simulation program by taking advantage of COMSOL Multiphysics, LED Module for the production of the most preferred package type, omitting the COH Type COB Type and board simulation of the thermal analysis is in progress. LED Module that passes through the Heat-sink of the simulation results, depending on the location of the COB Type Max. Approximately $78^{\circ}C$ ~ Min. Approximately $62^{\circ}C$, COH Type the Max. Approximately $88^{\circ}C$ ~ Min. Approximately $67^{\circ}C$ has been confirmed that the temperature stability. Compared with COB Type Max. AIthough temperature difference is about $10^{\circ}C$, Min. At a temperature of about $5^{\circ}C$ confirmed to be enough to reduce the gap, LED Point confirming the results of the temperature curves for COB Type Max. Approximately $100^{\circ}C$ ~ Min. Approximately $77^{\circ}C$, COH Type the Max. Approximately $100^{\circ}C$ ~ Min. Approximately $86^{\circ}C$ temperature stability was confirmed that, COB Type COH Type, compared to approximately $10^{\circ}C$ temperature was higher.

• Composites Research
• /
• v.23 no.6
• /
• pp.7-13
• /
• 2010

Type3 cylinder is a composite pressure vessel fully over-wrapped with carbon/epoxy composite layers over an aluminum liner, which is the most ideal and safe high pressure gas container for CNG vehicles due to the lightweight and the leakage-before-burst characteristics. During service in CNG vehicle, if a fiber cut damage occurs in outer composite layers, it can degrade structural performance, reducing cycling life from the original design life. In this study, finite element modeling and analysis technique for the composite cylinder with fiber-cut crack damage is presented. Because FE analysis of type3 cylinder is path dependant due to plastic deformation of aluminum liner in autofrettage process, method to introduce a crack into FE model affect analysis result. A crack should be introduced after autofrettage in analysis step considering real circumstances where crack occurs during usage in service. For realistic simulation of this situation, FE modeling and analysis technique introducing a crack in the middle of analysis step is presented and the results are compared with usual FE analysis which has initial crack in the model from the beginning of analysis. Proposed analysis technique can be used effectively in the evaluation of influence of damage on composite layers of type3 cylinder and establish inspection criteria of composite cylinder in service.

• Journal of Families and Better Life
• /
• v.14 no.3
• /
• pp.211-222
• /
• 1996

The purpose of this study is to classify the expenditure behaviors of housewives into some types and to identify the characteristics of the types focucing on diverse expenditure behaviors of urban households. In this study it is assumed that the expenditure behaviors are classified by there factors-(1)the orientation of money saving (2)the orientation of time saving and (3)the orientation of others. The present study suggests following three questions. (1). Can the expenditure behaviors of urban housewives be classified according to the orientation of money saving the orientation of others? (2) What distictions exist among the types? (3) Which variables are useful in classifying the expenditure behaviors? For empirical analysis the data of the study was collected from 650 housewives living in Seoul. The statistical methods adopted for data analysis are frequency percentage mean Pearson's correlation coefficient factor analysis cluster analysis one way ANOVA Duncun's multiple ran e test and discriminant analysis. As the major findings 4 types were extracted, According to the level of each dimensions the names for the each type were given as "the type of attaching importance to money saving" "the type of attaching importance to time and appearance" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and time" "the type of attaching importance to money saving and appearance" In "the type of attaching importance to money saving" the significant portion of housewives have high school degrees and compared with other types this type includes more husbands having sales and service job 55% of housewives of "The type of attaching importance to time and appearance" have graduate or higher degrees. The significant part of earned incomes range from 3 million won to 5 million won. The rate of housewives employed in the professional job is higher than other types. In "The type of attaching importance to money saving and time" the rate of the employment of housewives in this type is the highest among the types. In "The type of attaching importance to money saving and appearance" the significant portion of housewives have graduate degrees. In the jobs of he spouses the management job is major. The consciousness of belonging to the middle class is higher than other types. In this type the level of education is high but that of income is not. The result of the discriminant analysis says that the earned income and the consciousness of belonging to a calss are the most critical variables to classify the expenditure behaviors into 4 type The accuray of the classification of the discrimination equation composed of these variables is 47,5% The accuracy is improved by 10%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.814-827
• /
• 2012

This study analyzed the presentation trend of a checklist method for trench coat designs. Through this analysis, this study examined the flow of trench coat designs and presents future design directions. Research was conducted in the following method. A total of 1,307 female trench coat photos were selected from the photos presented in the top 4 collections from 2006 to 2011. These photos were used for analysis and frequency analysis was conducted. Among the checklist methods presented in trench coats, the modification type was most common, followed by the elimination type, conversion type, combination type, minimization type, addition type, and magnification type, respectively. Checklist methods were continuously presented even while increasing and decreasing according to the year and season. This showed that it was highly possible for checklist methods to be continuously applied in future trench coat designs. Generally, a high frequency of appearance was shown in 2010 and during the F/W season. According to the development direction of future trench coat designs applied with the checklist method, it is predicted that the modification type and the elimination type (which have generally displayed high appearance frequency) will be continuously magnified in the future. In particular, it is expected modifications in structural details (which have showed an upward trend in 2011) will be further magnified.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.65-71
• /
• 2005

Area type is often used in freight demand analysis and logistics planning models. For example, in freight transportation planning. area type variable is most often commonly used in freight generation (attraction) model. Yet a reliable, forecastable and measurable definition or area type is generally not documented. In fact, there is little literature on the subject of predicting area type in the context of freight planning models. This can be troublesome when applying models to long-range logistics planning where significant changes in population and employment result in changes in the general character of an area. Through the use of Discriminant Model, GIS (Geographic Information System) analysis and Delphi methods, this paper presents the successful exploration for a quantifiable means of determining area type.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.183-194
• /
• 2001

The purpose of this study are to systematize the concept on apparel store service and to provide the importance of each service according to the shopping types as well as demographic characteristics of consumers. The data was collected from 628 females and analyzed by factor analysis, reliability analysis, mean, percentage, cluster analysis, ANOVA, Duncan test, paired t-test, and t-test. The results are as follows: 1) All apparel stores consist of two categories, Products and Services. The products obviously entail whatever the store is selling. The services, on the other hand, can be broken down into three different factors of responsibility: public relations service, store environmental service, and promotional service. 2) Consumers can be classified into one of four categories: conventional type, practical type, recreational type, and casual type. 3) A recreational type and a practical type shoppers take into consideration all three service factors. The conventional and casual type shoppers, as compared to the recreational or practical type shoppers, arent really concerned with much of anything, least of the promotional service factor. 4) It has been found that the typical Korean consumer is more concerned with the public relations service factor, rather than the store environmental service factor or promotional service factor. 5) It has been found that the importance of services are significantly different in relation to the demographic characteristics, whether that be age, marital status, or the age of the youngest child.