• Title/Summary/Keyword: type 1 and type 2

Search Result 31,233, Processing Time 0.064 seconds

Pervaporation Separation of Phenol-Water Mixtures by Using Silicone Membranes (실리콘 막을 이용한 페놀-물 혼합물의 투과 증발 분리)

  • Rhim, Ji-Won;Sohn, Min-Young;Lee, Kew-Ho
    • Applied Chemistry for Engineering
    • /
    • v.5 no.5
    • /
    • pp.772-778
    • /
    • 1994
  • The pervaporation separation experiments of phenol-water mixtures were carried out by using Type 1 (PDMS : crosslinking agent= 1 : 0.25) and Type 2 (PDMS : crosslinking agent= 1 : 0.35) silicone rubber membranes at 30, 40 and $50^{\circ}C$. The phenol concentrations in the feed to be separated were 500 ppm to 5 wt%. Type 2 membranes were more efficient than Type 1 membranes for the separation of phenol-water mixtures. The phenol concentration of 70wt% was obtained for 5wt% of phenol concentration in the feed at $30^{\circ}C$ and 11wt% phenol concentration observed for 500ppm of phenol concentration in the feed at $30^{\circ}C$ by using Type 2 membranes.

  • PDF

Corrosion Stability of Iron Artifacts after Treating with Water Treatment (수처리제를 사용한 철제유물의 부식 안정성 연구)

  • Jeong, Ji Hae
    • Journal of Conservation Science
    • /
    • v.33 no.5
    • /
    • pp.381-390
    • /
    • 2017
  • Desalination is the main focus of the stabilization of iron artifacts. However, drawbacks such as re-corrosion are noted due to the uncertainty in the elimination of the corrosive factors and artifacts. Several studies have been carried out on the effects of corrosion inhibitors to overcome these shortcomings. In this study, the effects of type 3 water treatment on corrosion inhibitors were investigated. Surfaces of samples that contained film corrosion inhibitors on their surfaces were analyzed. The results revealed that the surface rust was removed from the sample of type 1 No. 2 that was mainly composed of phosphate. The average weight reduction rates of re-corrosion samples were 0.58, 0.03, and 0.07% for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The changes in the $Cl^-$ ion, a corrosive agent were found to be 28.60, -4.08, and -1.94 ppm for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The water-treated films were analyzed by X-ray photoelectron spectroscopy (XPS). It was found that type 2 No. 2 had less Fe the basis metal, than that in type 3 No. 2 indicating much better film. Moreover, Si content was higher in type 2 No. 2, based on the silicate content, than in type 3 No. 2. They are speculated to be the reason or the formation of a better film. Type 1 No. 2, which is mainly composed of phosphate, would be inappropriate as a metal artifact conservation treatment. It was determined that type 2 No. 2 and type 3 No. 2 water treatments, which are mainly composed of silicate, provided excellent corrosion inhibiting effects. Corrosion inhibitors could be used as emergency treatment agents during the excavation of iron artifacts.

A Morphological study on Occlusion and Maxillary dental Arch in Korean (한국인(韓國人)의 교합(咬合)과 상악치열궁(上顎齒列穹)에 관(關)한 형태학적(形態學的) 연구(硏究))

  • Kim, Song-Il
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.9 no.1
    • /
    • pp.9-15
    • /
    • 1969
  • The purpose of this study was to examine arch form, occlusion in centric occlusion. Male 561 case, Female 305 case were impressioned with alginate impression material, and plaster models were made. Occlusion and maxillary dental arch were studied on plaster models in Korean adults aged from 18 to 60 Years. The results were as follows. 1. The upper dental arch was U-type(57.77%), O-type(23.52%), V-type(18.71%) in male, and U-type(60.66%), O-type(27.11%), V-type(12.13%) in female. 2. The commonest type of the anterior bite was 1-form($68.09{\pm}1.97%$) in male, ($72.46{\pm}2.56%$) in female, and posterior bite was 1-form($65.06{\pm}2.01%$) in male, ($69.51{\pm}2.64%$ in female. 3. In the maxillary dental arch U-type was frequented and the relationship of occlusion in upper and lower dental arch was mainly 1-form.

  • PDF

A Study on Personal Color in Relation with Well-matched Color and Preferred Color (퍼스널 컬러에 관(關)한 연구(硏究) - 선호색(選好色)과 조화색(調和色)을 중심(中心)으로 -)

  • Oh, Hee-Sun
    • Journal of Fashion Business
    • /
    • v.3 no.2
    • /
    • pp.31-36
    • /
    • 1999
  • This study is to examine personal color - preferred color, well-matched color and the relations between preferred color and the well-matched color. Focus is also placed on how sexual difference influences color temperature preference. For data collection, a questionnaire including color stimulus was employed. The subjects of this study were the male and female college students who lived in Pusan. The results of the research are summarized as the following : In view of preferred color, male subjects preferred KEY2 color(warm) in red, pink, and yellow, and preferred KEY1(cool) in green and blue. While most subjects showed the same signal, in green, male preferred KEY1 color and female preferred KEY2 color. Concerning preferred personal color type, KEY1 type person liked KEY1 color except red, and KEY2 type person liked KEY2 color except blue. This shows that people prefer the focused color presenting its own traits. In view of well-matched color, most subjects liked KEY2 color in red, yellow, pink, and they selected KEY1 color in blue as the well-matched color. However, in green, each sex showed different preferences; while male subjects selected KEY1 color as the well-matched color, female ones selected KEY2 color. In each personal color type, KEY1 type male evaluated KEY1 color as the well-matched color, KEY2 type male evaluated KEY2 color except blue. KEY1 type female chose all the KEY1 color as well-matched colors, and KEY2 type female chose KEY2 color. The well-matched colors are similar between male and female subjects. In over 80 percentage of the answers, the preferred colors coincided with well-matched colors. KEY1 type persons chose KEY1 color, and KEY2 type person chose KEY2 color as the well-matched color. These results show that there is a meaningful relationship between the preferred color and well-matched color.

  • PDF

Subjectivity Type Analysis Study of Single-person Households on Meal Kit Products of Food Service Industry (외식업체 밀키트(Meal Kit)상품에 대한 1인가구의 주관적 인식유형 분석연구)

  • Kim, Chan-Woo;Lee, Kang-Yeon
    • The Journal of the Korea Contents Association
    • /
    • v.20 no.4
    • /
    • pp.406-415
    • /
    • 2020
  • This study applies Q methodology that can extract subjective opinion or recognition structure for each single household whose Meal Kit products developed and marketed by catering companies according to the demographic structure that changes socially. Implications were analyzed. As a result of subjective recognition type analysis in this study, four types were derived, and each type was named according to its specificity as follows. Type 1 (N = 6): Appearance Assessment Purchase Type, Type 2 (N = 6): Price Comparison Purchase Type, Type 3 (N = 10): Brand Trust Purchase Type, Type 4 (N = 2) : Easy Cooking Purchase Type was analyzed for each unique feature type. In this study, we analyzed the subjective opinion or recognition structure of single-person households whose Meal Kit products are the main demand groups, and suggested the direction and improvement measures for future food product development and launch for single-person households through the analysis by type. The purpose of this study is to provide academic implications based on the analysis results.

Attitudes of Nursing Students to Clinical Education : Q methodological Approach (임상실습에 대한 간호학생의 태도 : Q 방법론 적용)

  • 박송자
    • Journal of Korean Academy of Nursing
    • /
    • v.23 no.4
    • /
    • pp.544-554
    • /
    • 1993
  • The study was designed to identify the attitude of nursing students to clinical education through Q-methodology. A C sample was developed through a review of the literature and interviews. Twenty - seven statements made up the finalized Q- sample. This was out of an initial 143 statements developed through consultation with eight professors. The P sample consisted of 25 nursing students in S Health Junior College.0 statements were written on seperate cards and were given to the 25 subjects to sort according to degree of agreement or disagreement. The Q-sorts by each subject were coded and analyzed with QUANL PC Program. The analysis discovered three major attitudes, namely “amicable adaptation” 〈type 1), “Nightingale social service” (type 2), and “realistic occupation pursuit” (type 3). The correlation was .465 between type 1 and type 2, .293 between type 1 and type 3, and .273 between type 2 and type 3. The characteristics of each type were as follows ; Type 1 (amicable adaptation) They satisfied in interpersonal relationships in the clinical setting. They would not dream of becoming Nightingale, but thought of nursing care affirmatively and performed their works faithfully and adapted themselves to the new circumstances easily, Fourteen subjects were classified as type 1. Type 2 (Nightingale: social service) They often dreamed as a child that they would be Nightingale with a white uniform and think that nursing is a gift from heaven. They have an aptitude for nursing care by nature and selected nursing science them-selves. They give care to the sick with pleasure. Seven subjects were classified as type 2. Type 3 (realistic occupation pursuit) They were not satisfied with their nursing practice. First of all they want a stable job, therefore they selected nursing science. They had conflicts in clinical practice, but were responsible for nursing and studied hard. Four subjects were classified as type 3. Through the results of this study, the attitude of nursing students to clinical education could be classified into three types. Therefore it is suggested that clinical education would be more valuable, if it was planned according to an understanding of the attitudes of nursing students to clinical education.

  • PDF

Mothers' Experiences of Caring for Children with Precocious Puberty: A Q-Methodological Approach (성조숙증 아동 어머니의 돌봄 경험: Q 방법론적 접근)

  • Lee, Hye Jin;You, Mi-Ae
    • Journal of Korean Academy of Nursing
    • /
    • v.50 no.2
    • /
    • pp.255-270
    • /
    • 2020
  • Purpose: This study explored experiences of mothers caring for children with precocious puberty. Methods: Q-methodology was used for analyzing individual subjectivity. Seventy Q-statements were selected and scored by 50 participants on an 11-point scale. The collected data were analyzed using the PC QUANL program. Results: The following eight types of care experiences of mothers of children with precocious puberty were identified: Type I-1: hypersensitive and best-result oriented, Type I-2: treatment burden, Type II-1: treatment-oriented, Type II-2: self-blame, Type III-1: accepting and compliant, Type III-2: treatment confused, Type IV-1: serious and engaged, and Type IV-2: naturalism-oriented. Conclusion: These results can help develop specific education programs based on types of care experiences for the promotion of care among mothers of children with precocious puberty.

Comparing type-1, interval and general type-2 fuzzy approach for dealing with uncertainties in active control

  • Farzaneh Shahabian Moghaddam;Hashem Shariatmadar
    • Smart Structures and Systems
    • /
    • v.31 no.2
    • /
    • pp.199-212
    • /
    • 2023
  • Nowadays fuzzy logic in control applications is a well-recognized alternative, and this is thanks to its inherent advantages. Generalized type-2 fuzzy sets allow for a third dimension to capture higher order uncertainty and therefore offer a very powerful model for uncertainty handling in real world applications. With the recent advances that allowed the performance of general type-2 fuzzy logic controllers to increase, it is now expected to see the widespread of type-2 fuzzy logic controllers to many challenging applications in particular in problems of structural control, that is the case study in this paper. It should be highlighted that this is the first application of general type-2 fuzzy approach in civil structures. In the following, general type-2 fuzzy logic controller (GT2FLC) will be used for active control of a 9-story nonlinear benchmark building. The design of type-1 and interval type-2 fuzzy logic controllers is also considered for the purpose of comparison with the GT2FLC. The performance of the controller is validated through the computer simulation on MATLAB. It is demonstrated that extra design degrees of freedom achieved by GT2FLC, allow a greater potential to better model and handle the uncertainties involved in the nature of earthquakes and control systems. GT2FLC outperforms successfully a control system that uses T1 and IT2 FLCs.

Evaluation of Performance and Maintenance Cost for Roadside's Particulate Matter Reduction Devices Using Smart Green Infrastructure Technology (스마트 그린인프라 기술을 활용한 도로변 미세먼지 저감장치의 성능 및 유지·관리 비용 평가)

  • Song, Kyu-Sung;Seok, Young-Sun;Yim, Hyo-Sook;Chon, Jin-Hyung
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.25 no.4
    • /
    • pp.15-31
    • /
    • 2022
  • The Green Purification Unit System (GPUS) is a green infrastructure facility applicable to the roadside to reduce particulate matter from road traffic. This study introduces two types of GPUS (type1 and type2) and assesses the performance and maintenance costs of each of them. The GPUS's performance analysis used the data collected in November 2021 after the installation of the GPUS type1 and type2 at the study site in Suwon. The changes in the particulate matter concentration near the GPUS were measured. The maintenance cost of GPUS type1 and type2 was assessed by calculating the initial installation cost and the management and repair cost after installation. The results of the performance analysis showed that the GPUS type1, which was manufactured by combining plants and electric dust collectors, had a superior particulate matter reduction performance. In particular, type1 produced a greater effect of particulate matter reduction in the time with a high concentration (50㎍/m3 or higher) of particulate matter due to the operation of electric dust collectors. GPUS type2, which was designed in the form of a plant wall without applying an electric dust collector, showed lower reduction performance than type1 but showed sufficiently improved performance compared to the existing band green area. Meanwhile, the GPUS type1 had three times higher costs for the initial installation than GPUS type2. In terms of costs for managing and repairing, it was evaluated that type1 would be slightly more costly than type2. Finally, this study discussed the applicability of two types of GPUS based on the result of the analysis of their particulate matter performance and maintenance cost at the same time. Since GPUS type2 has a cheaper cost than type1, it could be more economical. However, in the area suffering a high concentration of particulate matter, GPUS type1 would be more effective than type2. Therefore, the choice of GPUS types should rely on the status of particulate matter concentration in the area where GPUS is being installed.

A Comparative Study of Interlocking IM Nailing and LCP Fixation through MIPPO Technique in the Treatment of Distal Metaphyseal Tibial Fracture (경골 원위부 골절 치료에서 최소 침습적 접근법을 통한 잠금 나사 금속판 고정술과 교합성 골수강 내 금속정 고정술의 비교 연구)

  • Lee, Chang-Soo;Suh, Jin-Soo;Kim, Ji-Hoon
    • Journal of Korean Foot and Ankle Society
    • /
    • v.12 no.1
    • /
    • pp.80-85
    • /
    • 2008
  • Purpose: To evaluate and compare the outcome between interlocking IM nailing and LCP fixation in the treatment of distal metaphyseal tibial fracture. Materials and Methods: From January 2000 to December 2007, 17 patient were treated by interlocking IM nail and 13 patient were treated by LCP fixation for distal metaphyseal tibial fracture. Results: According to AO classification, there were 2 type A1 fracture (12%), 6 type A2 fracture (36%), 3 type A3 fracture (18%), 4 type B1 fracture (24%), 1 type B3 fracture (6%), 1 type C1 fracture (6%) in interlocking IM nailing group and 1 type A2 fracture (7.7%), 2 type A3 fracture (15.4%), 3 type B1 fracture (23%), 3 type B2 fracture (23%), 3 type C1 fracture (23%), 1 type C2 fracture (7.7%) in LCP fixation group. The clinical functional outcome (according to AOFAS score) is 75.6 point in IM nailing group and 81.5 point in LCP fixation group. In IM nailing group, 65% of patient showed satisfactory result and In LCP fixation group, 77% of patient showed satisfactory result. Conclusion: There is no difference on clinical results between IM nailing and MIPPO (minimal invasive percutaneous plate osteosynthesis) group in the treatment of distal tibia fracture. But MIPPO group have higher subjective satisfactory score and less complication rate. The weakness of our study is a small case number and limited follow-up and we believe a better designed prospective study will be needed.

  • PDF