• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.116-126
• /
• 2008

This paper describes the Dual-band WLAN transmitter with 2.4[GHz], 5[GHz]. Dual-band WLAN transmitter was designed at 2.4[GHz] and 5[GHz]. The Dual-band WLAN transmitter has a amplifier which operate at 2.4[GHz] and 5[GHz] frequency and two VCO(Voltage Controlled Oscillator) or VCO has a wide scope of frequency. these problem cause a size and a power consumption, The Dual-band WLAN transmitter module was proposed to solve these. the transmitter was designed to get output signals of IEEE 802.11a's 5.8[GHz] band signal using frequency multiplication way or to act a amplifier about the 2.4[GHz] band signal of IEEE 802.11b/g, according to inputed frequency and bias voltage that a eve using single transmission block. The output spectrum get the improved specification of ACPR of 4[dB], 6[dB], 16[dB] at +11[MHz], +20[MHz], +30[MHz] offset of center frequency compared to no linearization, was satisfied to transmit spectrum mask of IEEE 802.11a wireless Lan.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.226-229
• /
• 2010

LED(Light Emitting Diode) is an emitting device which energy is same to the bandgap of p-type and n-type semiconductor junction. Recently high brightness LED is used in fish-luring light and traffic signal light alternative of normal light bulb, and widely used in the area of display pannel. Moreover nowadays LED has been used as a back light of LCD display. Recently, visible light communication(VLC) using LED, that allow two-way serial data communication between LEDs over a distance of sveral centimeters or meters, has been widely studied in the area of digital information transmission along with illumination and display. In this paper, we present LED communication system and their applications.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.109-115
• /
• 2019

Currently, LPWA(Low Power Wide Area) communication technology is widely used due to the development of IoT(Internet of Things) technology. Among the LPWA technologies, LoRaWAN(Long Range Wide Area Network) is widely used in many fields due to its wide coverage, stable communication speed, and low-cost modem module prices. In particular, LoRa(Long Range) can easily construct LoRaWAN with a dedicated gateway. So many organizations are building their own LoRaWAN-based networks. The LoRaWAN Gateway receives the LoRa packet transmitted from an End-device installed in the adjacent location, converts it into the Internet protocol, and sends the packet to the final destination server. Current LoRa Gateway uses a single-hop method, and each gateway must include a communication network capable of the Internet. If it is the mobile communication(i.e., WCDMA, LTE, etc.) network, it is required to pay the internet usage fee which is installed in each gateway. If the LoRa communication is frequent, the user has to spend a lot of money. We propose an idea on how to design a multi-hop protocol which enables packet routing between gateways by analyzing the LoRaWAN communication method implemented in its existing single-hop way in this paper. For this purpose, this paper provides an analysis of the standard specification of LoRaWAN and explains what was considered when such protocol was designed. In this paper, two gateways have been placed based on the functional role so as to make the multi-hop protocol realized: (i) hopping gateway which receives packets from the end-device and forwards them to another gateway; and (ii) main gateway which finally transmits packets forwarded from the hopping gateway to the server via internet. Moreover, taking into account that LoRaWAN is wireless mobile communication, a level-based routing method is also included. If the protocol proposed by this paper is applied to the LoRaWAN network, the monthly internet fee incurred for the gateway will be reduced and the reliability of data transmission will be increased.

• Journal of Korea Trade
• /
• v.24 no.4
• /
• pp.1-17
• /
• 2020

Purpose - Since China has been South Korea's biggest export destination, uncertainty shocks originating from it would influence South Korea's exports. This paper evaluates the effects of China's economic policy uncertainty on Korea's exports to explore the transmission channels. Design/methodology - Incorporating endogeneities and nonlinearities, this study employs a quarterly time-varying parameters vector autoregressive model to investigate the relationships between China's economic policy uncertainty and Korea's exports, where the overparameterization due to time-varying specifications is overcome by a novel stochastic model specification search framework. According to previous theoretical studies, this paper assesses two channels, demand shock channel and exchange rate channel, through which foreign uncertainty affects Korea's exports. This paper identifies the primary drivers of Korea's aggregate exports and analyzes the rationales for the time-variant impacts of China's economic policy uncertainty on Korea's exports to China. Findings - Our empirical results reveal that Korea's aggregate exports are less responsive to China's economic policy uncertainty shocks and significantly move together with global demand. In contrast, its bilateral exports to China are highly responsive in a negative and time-variant way. Moreover, Chinese investment is an important channel through which China's economic policy uncertainty affects Korea's exports to China after 2010. Further, the time-variant effects of China's economic policy uncertainty on Korea's exports to China are related to changes in China's foreign trade policies, global economic conditions, and China's degree of economic freedom. Originality/value - Few previous studies touch the effects of external uncertainty shocks on South Korea's exports. This paper attempts to fill this gap and explicitly investigate the impacts of China's economic policy uncertainty on Korea's exports from a time-varying perspective. As Korea is an export-oriented economy, this study provides insights for the Korean government to understand the transmissions of external uncertainty better.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.141-152
• /
• 2022

As a method to understand the ecological habits around the artificial reef, various reports such as fishing gear survey, diving, sound survey, underwater CCTV and camera, etc. are reported. Among them, the sound survey method is carried out by installing an acoustic system on the ship and can be investigated regardless of the marine environment such as time constraints and turbidity. Such method, however, takes a lot of manpower and time as the ship travels at a constant speed. Investigations around artificial reefs are being conducted in an artificial way, and a lot of time and labor are consumed as such. Maritime buoys have been operated for various purposes such as route signs, weather observation, marine environment monitoring and defense monitoring for navigation safety in the past, but studies on monitoring systems for ecological habits and distribution of fish using marine buoys are remarkably insufficient. Therefore, this study aims to develop a system that allows users to directly monitor fish group detector data by estimating the distribution of fish groups around artificial reefs and using wireless communication at sea. In order to confirm the suitability of the maritime buoy used in this study, it was operated to compare data using LTE-equipped buoys capable of wireless communication and a data logger-type system buoy. Data transmission of buoys capable of LTE communication was carried out in a 10-minute ON, 10-minute OFF method due to the limitation of the power supply capacity, and data of the data logger-type buoy received full data. We compared and analyzed the data received from the two fish detectors. It is expected that real-time monitoring of the wireless buoy detection device using LTE will be possible through future research.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.55-62
• /
• 2024

Visible light communication, which transmits information using visible light, has advantages such as ultra-high speed, ultra-delay, and ultra-connectivity, so research is being conducted as a way to complement 6G communication. In this paper, a study was conducted to overcome the performance degradation caused by the RGB mixing ratio in visible light communication. In a visible light communication system using LED lighting, the role of lighting is an important function, and when used for communication, the performance difference according to the RGB mixing ratio inevitably occurs. In particular, if the intensity of light is below a certain standard, the problem of deteriorating the performance of the entire system occurs. In this study, when a certain performance or less occurs in the communication system caused by the difference in the mixing ratio among the three RGB channels, the remaining two signals except the LED with the best performance are transmitted to STBC (Space-Time Block Coding) to ensure the quality of communication. A computer simulation was performed to verify the performance of the proposed system, and it can be seen that the performance of the proposed system is improved compared to the existing system.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.273-281
• /
• 2016

The issue about the safety management of gas related work has been studied toward a direction to utilize IoT system recently. For this purpose, the matters of user's demand has been deduced through the literature survey, field survey, and professional consultation, by studying the characteristics of worker, work, and work site. In summary, these are the demands for mobile App, 1)a clear arrangement of contents, 2)a design with high readability, 3)a design with low death, 4) securing of user's accessibility, 5)an effective information transmission plan in the work section where it is impossible to operate the mobile device, 6)an activation of alarm function at the section of high working error, 7)a fast two-way transmission and receipt of safety inspection matter needed at work, 8)a selection of images and contents that can guide the situation to the worker in case of accident, 9)an alarm function for the degree of danger in an area of worker's location. Based on these, a basic design of safety application for gas related work has been proposed, that can secure the user accessibility.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.1 s.60
• /
• pp.1-6
• /
• 2007

It has been generally known that liposomes become unstable when they contain cyclodextrins (CDs). Our present studies demonstrate that these liposomes can be stable by association of amphiphilic polyelectrolytes. Transmission electron microscopy and photocorrelation spectroscopy results showed that polymer-associated liposomes containing CDs (${\beta}-CD$(${\beta}CD$) and hydroxypropyl-${\beta}CD$ ($HP{\beta}CD$)) were more stable than phosphatidylcholine (PC)-cholesterol (Chol) liposomes containing these CDs. We also compared the stability of PC-Chol liposomes with polymer-associated liposomes containing $HP{\beta}CD$ complexed with water-insoluble drug, rhaponticin (Rh). Two liposomes were relatively stable when $HP{\beta}CD$ did not contain Rh, but Rh-$HP{\beta}CD$ complexes triggered the disruption of PC-Chol liposomes. In contrast, polymer-associated Liposomes containing Rh-$HP{\beta}CD$ complexes maintained its stability over 6 months. The skin permeation test demonstrated that drugs solubilized by CDs were delivered better into the skin of guinea pig by using polymer-associated liposomes than by using PC-Chol liposomes. Above results showed that polymer-associated liposomes gave an effective way to stabilize the liposomes containing drug-loaded CDs, which gives an application of liposomes in drug delivery systems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.500-504
• /
• 2008

The objective of this paper is to evaluate the feasibility of using an optimization model as a effective way to search conjunctive operation scheme to meet two conditions; one is to minimize the electric cost for pumping and another is to meet the water demand for satisfying customers. The feasibility is confirmed as comparing the best combinations of pumps between multi-regional water supply networks from multiple sources which are obtained through an optimization modeling and EPAnet modeling. KModsim model, a network optimization model, was used to determine conjunctive operation scheme in the pipe system. KModsim, based on Lagrangian Relaxation algorithm, is useful for modeling network system and obtaining simultaneously pump combination and water allocation with given input option such as energy unit cost supplying from a source into a consumer, operating pumping combination. This study develops the procedure of determining optimal conjunctive operation scheme with using KModsim model. As a study region, the water supplying systems of the Geojae-city in the Geongsang Namdo Province was selected and investigated. The EPAnet hydraulic simulation result(Ryu et al, 2007, KSWW) gave input data for optimization model; energy unit price(won/$m^3$), water service available area etc.. It was assured that the combination of pump operation through optimum conjunctive operation is to be optimum scheme to obtain the best economic water allocation with comparison to the hydraulic simulation result such as electric cost and pump combination cases. The results obtained through the study are as follows. First, It was found that a well-allocated water supply scheme, the best combination of pump operation through optimum joint operation, promises to save the electric cost and satisfy all operational goals such as stability and revenues during the period. Second, an application of KModSim, a network model, gave the amount of water allocation from each source to a consumer with consideration of economic supply. Finally, in a service area available to supply through conjunctive operation of existing inter-regional water supply networks within short distance, a conjunctive operation is useful for determining each transmission pipeline's service area and maximizing the effectiveness of optimizations in pumping operation time.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.1
• /
• pp.47-57
• /
• 2019

The end of the 20th century, along with the popularity of new media technology and the rise of new media art, dance as a visual art, and body language art, has the features of more and more rich and changeful. In today's Internet booming new media environment, many different fields, such as film and theater, computer technology, digital art, etc.) with its commonness and characteristics of all kinds of interaction between the creation, produced a new interdisciplinary research with theoretical model. When cross-border interactions between various areas become a hot topic at the same time, the traditional form of dance performances are also seeking new breakthrough. Canada's famous social psychologist McLuhan believes that modern is retrieving lost over a long period of time "overall" feel, return to a feeling of equilibrium. The audience how to have the characteristics of focus on details of visual art back to the "overall" feel worthy of study. At the same time, the new media in today's digital dance teaching in colleges and universities dancing education remains to be perfect and popular, if continue to use the precept of the traditional teaching way blindly, so it is difficult to get from the development of the current domestic dance overall demand. In this paper, the main body is divided into two parts, the first chapter is the study of image device dance performance art, the second chapter is the research of digital dance teaching application system, thus further perspective of media technology to explore dance art crossover practice under the new media environment and mode of transmission.