• Tunnel and Underground Space
• /
• v.15 no.6 s.59
• /
• pp.432-440
• /
• 2005

Baehuryeong tunnel connects Chuncheon with Hwacheon in Kangwon, Korea, This tunnel is a single tunnel with 5,057 m long and two bidirectional lanes which will be extended into low lanes in the future. The estimated construction period of Baehuryeong tunnel is approximately 55 months. This tunnel will become the longest bidirectional roadway tunnel in Korea. Compared to a twin tunnel, a bidirectional single tunnel has two major disadvantages with regard to the ventilation system and ease of escape during fire. For these reasons, a service tunnel and the transverse ventilation system are planned first time in Korea. In case of fire, the tunnel ventilation design aims to maintain a smoke free layer for passenger evacuation. The geology of Baehuryeong tunnel site is mainly composed of gneiss and granite. Baehuryeong fault is a mainly large scale fault which stands vertical and parallels with tunnel direction. The influenced zone of this fault is within 70 m. Baehuryeong tunnel was designed that it was separated with the distance of more than 100 m from Baehuryeong fault for its safety.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.177-182
• /
• 2004

This study presents the application of aerial photographs and KOMPSAT-1 Electro-Optical Camera(EOC) imagery in detecting the change of an urban area that has been rapidly growing. For the study, we used multi-time images which were acquired by two different sensors. For all of the images, the coordinate reference system and scale were first made identical through the 1st and 2nd geometric corrections and then image resampling were carried out to spatial resolution of 7m to detect changes under the same conditions. The Image Differencing was employed as a change detection technique. It was confirmed to be able to detect the changes of terrestrial surface like building, structure and road features from aerial photos and KOMPSAT EOC images with single band. The changes could be detected to some extent with the images acquired from different kinds of sensors as well as the same kinds of sensors.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.139-144
• /
• 2004

This study aims to analyze the accuracy of rover speed change in route surveying using RTK-GPS. Route surveying methods using GPS contain Static, DGPS, and RTK-GPS. Much research of navigation system, positioning of vehicles by DGPS, and accuracy analysis by GPS surveying have already been done. From this study, it is firstly found that DGPS is suitable for car navigation and sea navigation with an error of meter scale but not good for detailed construction, designing maps and updating GIS databases. Secondly, RTK-GPS can be used for managing gas pipes, water supply and drain pipes and fiber-optic cable that are needed to be controlled in a real time basis. Thirdly, since the accuracies of route surveying by RTK-GPS and DGPS are not correctly matched with the change of rover speed, the choice of route surveying method from those two should follow the need of accuracy fidelity Further study should focus on Cycle Slip problem and coordinate change problem in tunnel and mountainous areas.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.367-374
• /
• 2005

This paper proposes a sound quality index to evaluate the vehicle interior noise. The index was developed using a correlation analysis of an objective measurement and a subjective evaluation data. First, the objective set of measurements was obtained at two specified driving conditions. One is from a wide-open test condition and the other is from a constant-speed test condition. At the same time, subjective evaluation was carried out using a score of ten scale where 17 test engineers participated in the experiment. The correlation analysis between the psycho-acoustic parameters derived from the objective measurement and the subjective evaluation was performed. The most critical factors at both test conditions were determined, and the corresponding equations for the sound quality were obtained from the multiple factor regression method. Finally, a comparative work between previous index and present index was performed to validate the effectiveness of the proposed index.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1407-1411
• /
• 2003

Due to the heat confinement in the shallow region of the target for a short time scale, pulsed laser annealing has received increasing interest for the fabrication of poly-Si thin film transistors(TFTs) on glass as a low cost substrate in the flat panel displays. The formation and growth mechanisms of poly silicon(poly-Si) grains in thin films are investigated using an excimer laser crystallization system. To understand the crystallization mechanism, the grain formations are observed by FESEM analysis. The optical reflectance and transmittance during the crystallization process are measured using HeNe laser optics. A two-step ELC(Excimer Laser Crystallization) process is applied to enhance the grain formation uniformity.

• Laser Solutions
• /
• v.6 no.2
• /
• pp.9-17
• /
• 2003

Due to the heat confinement in the shallow region of the target for a short time scale, pulsed laser annealing has received an increasing interest for the fabrication of poly-Si thin film transistors(TFTs) on glass as a low cost substrate in the flat panel displays. The formation and growth mechanisms of poly silicon(poly-Si) grains in thin films are investigated using an excimer laser crystallization system. To understand the crystallization mechanism, the grain formations are observed by FESEM photography. The optical reflectance and transmittance during the crystallization process are measured using HeNe laser optics. A two-step ELC(Excimer Laser Crystallization) process is applied to enhance the grain formation uniformity.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.2
• /
• pp.73-79
• /
• 2015

Dynamic culling scheme is usually implemented to handle overhead caused by rendering the massive large-scale terrain data in flight simulator. However, existing culling scheme without considering altitude is not suitable for flight simulator due to additional computational overhead. To solve this problem, in this paper, we propose hybrid approach by applying two dynamic culling schemes depending on altitude. In addition, we remove unnessary computational overhead by creating different z-map resolution when aircraft changes its altitude. The proposed scheme is implemented with open graphic library and tested with real terrain data. Through the experimental results, we can recognize the improved rendering speed about 8 to 73 percents as compared to existing scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.429-435
• /
• 2010

Three dimensional (3-D) object detection and pose estimation from a single view query image has been an important issue in various fields such as medical applications, robot vision, and manufacturing automation. However, most of the existing methods are not appropriate in a real time environment since object detection and pose estimation requires extensive information and computation. In this paper, we present a fast 3-D object detection and pose estimation scheme based on surrounding camera view-changed images of objects. Our scheme has two parts. First, we detect images similar to the query image from the database based on the shape feature, and calculate candidate poses. Second, we perform accurate pose estimation for the candidate poses using the scale invariant feature transform (SIFT) method. We earned out extensive experiments on our prototype system and achieved excellent performance, and we report some of the results.

• Journal of Information Processing Systems
• /
• v.8 no.2
• /
• pp.263-278
• /
• 2012

The data grid provides geographically distributed resources for large-scale applications. It generates a large set of data. The replication of this data in several sites of the grid is an effective solution for achieving good performance. In this paper we propose an approach of dynamic replication in a hierarchical grid that takes into account crash failures in the system. The replication decision is taken based on two parameters: the availability and popularity of the data. The administrator requires a minimum rate of availability for each piece of data according to its access history in previous periods, but this availability may increase if the demand is high on this data. We also proposed a strategy to keep the desired availability respected even in case of a failure or rarity (no-popularity) of the data. The simulation results show the effectiveness of our replication strategy in terms of response time, the unavailability of requests, and availability.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.1-12
• /
• 2009

Presently, the semiconductor industry has the chronic problem. In the semiconductor industry, it has the semiconductor wafer, a package, the optical filter cut by using the saw blade, the mold, a laser etc. The cutting technique has the difficulty due to the rising of the production cost by the wearing of mold, the poor quality problem due to generated heat at the moment of cutting procedure and curve cutting etc. The goal of this time of national research and development project is develop the apparatus for solving the problem that the existing cutting technique has. The technology is so called waterjet abrasive method. This technology will be mainly applied to cut a semiconductor package and a wafer. Two important things to be considered are ripple effect(in other words, the scale of a market) and simplicity of an application.