• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.237-253
• /
• 2019

For massive multiple-input multiple-output (MIMO) circumstances with time division duplex (TDD) protocol, pilot contamination becomes one of main system performance bottlenecks. This paper proposes an uplink pilot sequence assignment to alleviate this problem for spatially correlated massive MIMO circumstances. Firstly, a single-cell TDD massive MIMO model with multiple terminals in the cell is established. Then a spatial correlation between two channel response vectors is established by the large-scale fading variables and the angle of arrival (AOA) span with an infinite number of base station (BS) antennas. With this spatially correlated channel model, the expression for the achievable system capacity is derived. To optimize the achievable system capacity, a problem regarding uplink pilot assignment is proposed. In view of the exponential complexity of the exhaustive search approach, a pilot assignment algorithm corresponding to the distinct channel AOA intervals is proposed to approach the optimization solution. In addition, simulation results prove that the main pilot assignment algorithm in this paper can obtain a noticeable performance gain with limited BS antennas.

• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.261-281
• /
• 2023

Magnetic flux sensors are commonly used in monitoring the cable force, but the application of the sensors in large diameter non-closed Galfan cables, as those adopted in Yueqing Gymnasium which is located in Yueqing City, Zhejiang Province, China and is the largest span hybrid space structure in the world, is seldom done in engineering. Based on the construction of Yueqing Gymnasium, this paper studies the cable tension monitoring using the magnetic flux method across two stages, namely, the pre-calibration stage before the cable leaves the rigging factory and the field tension formation stage of the cable system. In the pre-calibration stage in the cable factory, a series of 1:1 full-scale comparative tests were carried out to study the feasibility and relability of this kind of monitoring method, and the influence on the monitoring results of charging and discharging voltage, sensor location, cable diameter and fitting method were also studied. Some meaningful conclusions were obtained. On this basis, the real-time cable tension monitoring system of the structure based on the magnetic flux method is established. During the construction process, the monitoring results of the cables are in good agreement with the data of the on-site pressure gauge.The work of this paper will provide a useful reference for cable force monitoring in the construction process of long-span spatial structures.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.2
• /
• pp.72-81
• /
• 2024

Korean aviation authority required air service providers to submit public disclosure of aviation safety investment to encourage proactive and voluntary safety investments. In 2023, two airport operators and seventeen airlines disclosed their safety investment results and plans for the first time. This study aims to examine and analyze the current status of the disclosure system, identify insights for its development, and set directions for the future. Safety investments by airport operators decreased by 14.3% in 2022 compared to 2021 due to decreased aviation demand. Airline increased their safety investment by 46% to 4 trillion won, investing heavily in MRO and aircraft replacement, leading to a decrease in the average fleet age by 0.8 years. FSCs have shown a significantly higher level of safety investment compared to LCCs. However, LCCs show higher safety investment relative to revenue. It is necessary to consider the characteristics of each operator as well as the scale when comparing safety investments. A roadmap is suggested based on the importance of disclosure items for the strategic approach and improvement measures for the aviation safety investment disclosure system.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.769-781
• /
• 2019

Dynamic displacement response of civil structures is an important index for in-construction and in-service structural condition assessment. However, accurately measuring the displacement of large-scale civil structures such as high-rise buildings still remains as a challenging task. In order to cope with this problem, a vision-based system with the use of industrial digital camera and image processing has been developed for long-distance, remote, and real-time monitoring of dynamic displacement of supertall structures. Instead of acquiring image signals, the proposed system traces only the coordinates of the target points, therefore enabling real-time monitoring and display of displacement responses in a relatively high sampling rate. This study addresses the in-situ experimental verification of the developed vision-based system on the Canton Tower of 600 m high. To facilitate the verification, a GPS system is used to calibrate/verify the structural displacement responses measured by the vision-based system. Meanwhile, an accelerometer deployed in the vicinity of the target point also provides frequency-domain information for comparison. Special attention has been given on understanding the influence of the surrounding light on the monitoring results. For this purpose, the experimental tests are conducted in daytime and nighttime through placing the vision-based system outside the tower (in a brilliant environment) and inside the tower (in a dark environment), respectively. The results indicate that the displacement response time histories monitored by the vision-based system not only match well with those acquired by the GPS receiver, but also have higher fidelity and are less noise-corrupted. In addition, the low-order modal frequencies of the building identified with use of the data obtained from the vision-based system are all in good agreement with those obtained from the accelerometer, the GPS receiver and an elaborate finite element model. Especially, the vision-based system placed at the bottom of the enclosed elevator shaft offers better monitoring data compared with the system placed outside the tower. Based on a wavelet filtering technique, the displacement response time histories obtained by the vision-based system are easily decomposed into two parts: a quasi-static ingredient primarily resulting from temperature variation and a dynamic component mainly caused by fluctuating wind load.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.3
• /
• pp.271-280
• /
• 2007

This paper presents the results of an experimental study to evaluate the redundancy in two plate-girder bridges, which are generally classified as non-redundant load path structures. The study was performed at a time when one of the two girders was damaged. The bottom lateral bracing was considered the experimental variable, and two 1/5-scale bridge specimens of simple span with and without a lateral bracing system were fabricated. Loading tests were first performed on the intact specimens without a cracked girder, within an elastic range. Thereafter, the ultimate loading tests were conducted on the damaged specimens with an induced crack at the center of a girder. The test results showed that the cross beams and the concrete deck redistributed some of the load to the uncracked girder, but the lateral bracing system played an important role in improving the redundancy during the damage and was also effective for load redistribution even when the bridge was intact.

• Journal of Nutrition and Health
• /
• v.39 no.4
• /
• pp.417-425
• /
• 2006

The purpose of this study were to a) investigate operation of human resource in contract foodservice management company (CFMC), b) identify the staffing indices for the establishment an labor productivity for CFMC, and c) develop standardized model of staffing demand as foodservice's scale in CFMC. The data was collected using FS intra-net system from 138 contract-managed foodservice operations in A CFMC and statistical analysis was completed using the SAS/win package (ver. 8.0) for description analysis, ANOVA, Duncan multiple comparison, pearson correlation analysis, and regression analysis. The types of operation were included factory (45%), small scale operation (26%), office (11%), department store (10%), training institute (4%), and hospital (3%). The distribution of foodservice scale was classified by meal served was as follows; 'less than 500 meals (47%)', 'from 500 to 1500 meals (25%)', 'from 1500 to 2500 meals (17%)', and 'more than 2500 meals (12%)'. There was two types of contract method, fee-contract (53%) and profit-and-loss contract (46%) Some variables were significantly high operation indices such as selling price, food cost, monthly sales, net profit and others were significantly low operation indices such as labor, meal time a day in the small foodservice on meal scale (p<.001). The more foodservice was large, the more human resource was disposed on dietitian, cook, cooking employee altogether (p<.001). Foodservice in A CFMC was divided into 2 groups by 500 meals a day, according to comparative analysis of labor productivity as meal scale per working hour, meal scale a day and operation indices as meal per foodservice employee, meal per cooking employee (p<.001). The regression equation model was developed as 'the number of employees=1.82+0.014 ${\times}$ meal served' in the operation of less than 500 meals, 'the number of employees=9.42+0.013 ${\times}$ meal scale a day -0.94 ${\times}$ meal scale per working hour' in the operation over 500 meal scale using labor productivity indices and operation indices. Therefore, CFMC could be enhanced efficiency of human resource arrangement using the standardized model of staffing demand and would be increased effectiveness of profit.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.213-223
• /
• 2007

In this paper, we carry out a cyber group consultation by means of the video-based education system, and verify the effects. For the verification of this study, two assumptions were set up. These assumptions were inspected by selecting 45 students of D elementary school located in a big city, and coming up with a test utilizing one of video-based education systems. Following up, a self-respect test form and a questionnaire were made to verify of the group consultation to the video-based education system, and by analyzing the test form and the questionnaire, the conclusion of this study was finally drawn. The conclusion gained through the process adove is as follows: It turned out that real-time video-based cyber group consultation promoted self-respect and enthusiastic participation of consulters as well as formed emotinal stability and a close affinity between the consultant and the consulter through active interaction. The results of this video-based education system operation will be helpful to broaden the area of elementary school cyber group consultation. Further, it is thought that it will contribute to the basic investigation to verify the educational effects of Multi-point imaging system in the run-up to the operation of full-scale real-time video-based education systems.

• Journal of KIISE:Software and Applications
• /
• v.26 no.11
• /
• pp.1359-1371
• /
• 1999

대규모 네트워크 상에서 동작하는 분산 시스템의 구현을 위해 제시된 방법 중의 하나인 이동 코드 개념은 네트워크 공유 자원에 접근할 수 있는 효과적인 방법을 제시하였고 이 개념을 지원하는 많은 언어들의 개발을 가져왔다. 개발된 언어들이 가지고 있는 이동 코드를 지원하기 위한 언어 구문과 적용하려는 문제 영역의 특성을 반영한 언어 구문은 네트워크 프로그래밍을 하는데 있어서 효율과 문제 중심의 프로그램의 두 가지를 모두 가능하게 하고 있다. 본 논문에서는 현재 분산 컴퓨팅 환경에서 가장 많이 사용되고 있는 클라이언트-서버 모델을 확장하여 서버의 자원에 접근할 수 있는 또 다른 방법을 가진 모델을 제시하고, 이 모델을 표현할 수 있는 언어를 설계하였다. 설계된 언어는 이동 코드의 개념을 지원함으로써 대규모 네트워크에서 수행되는 프로그램의 작성을 가능하게 하고, 분산 범위 규칙을 채택함으로써 이동 코드의 기술을 일반 함수를 기술하듯 명확한 관점에서 할 수 있도록 하였다. 또한 네트워크 관련 자원들을 언어 구문으로 채택하여 네트워크 프로그래밍을 언어 수준에서 할 수 있도록 하였다. 언어의 이론적인 설계에 그치지 않고 설계된 언어를 수행할 수 있는 실행 시간 지원 시스템을 구현하였다. 실행 시간 지원 시스템은 언어를 해석하고 실행하는 코드 해석기와 이동 코드를 지원하는 네트워크 감독으로 구성되며 설계된 언어를 사용하여 실제로 네트워크 응용 프로그램을 작성하고 테스트 해 볼 수 있다.Abstract Some studies bring up a concept of code mobility as an innovative way to access network resources in order to develop distributed systems working on a large scale network. After that, many languages are suggested to support this concept. In these languages, language constructors for their particular application domains and mobile codes provide both problem-oriented views to the programmer and reasonable performance to the system. In this thesis, we extend the client-server model that is the most popular model in developing distributed systems these days. We propose a model to have another method to access server's resources and extend the C language to implement the proposed model for the large scale network. The new language has capability to build a software working on a large scale network by supporting mobile code and gives a consistent network programming view to the programmer by adapting distributed semantics. The language also makes network programming easy by providing network primitives at the language level. We implement a prototype of run-time system to support this language. The run-time system is composed of two major parts: code-interpreter that interprets and executes the language and network-daemon that supports mobile codes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.605-616
• /
• 2014

The purpose of this study is to analyze transport efficiency of each of the 17 urban railway lines being operated by national public agencies using Data Envelopment Analysis (DEA) and to seek strategies for improving efficiency of the urban railway system. The study identified the economies of scale derived from these values of efficiency and examined the effects on cost for free ride loss and profit of transport by the fare system as the external factor. At the time, Transport profits are estimated by two production factors such as the number of vehicles and service frequency derived from multiple regression. Finally, the measures to improve the efficiency were presented in terms of profitability in the national urban railway line by applying the values of efficiency derived from DEA to multidimensional scaling (MDS).

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.102-105
• /
• 1991

In recognition of the transportation problems of the present and to prepare for the ever increasing demands of the future, government decided to develop the magnetically levitated train domestically and started R&D program office in Korea Institute of Machinery and Metals(KIMM). This office since has established three step by step goals : first to develop a 40 passenger exhibition vehicle for Daejon EXPO'93, second to develop the low to mid-speed maglev system for urban public transportation by 1997 and finally the high speed inter-city maglev train by year 2001. The first two maglev systems will use attractive levitation-LIM driven technologies and these technologies are the ones currently being developed by this office and others. The maglev train system is a product of wide range of technologies from electro-technologies to civil engineering technologies. Some of the technologies are currently available but more have to be developed in the near future and these technologies are owned by or to be developed by various institutions within the science & technology community. The level of the technologies available at the present time are still very rudimentary and their basis are very narrow. Recently we have made a few successes in terms of levitation and propulsion but they are only with small scale modules and results are very qualitative at best. A great deal of development work has yet to be done to refine the technologies and to gain confidence. Full scale levitation/propulsion modules will be tested on the curved guideway within 6 months by this office and another institution. This paper reviews the current status of the maglev technologies in Korea and discuss the development strategies. The Korean maglev program is very ambitious and the schedule is even more so. A steady financial support and strong system engineering and integration are essential to the success of this program.