• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.193-204
• /
• 2019

This paper presents results from experimental and numerical studies on the response of steel-concrete composite box bridge girders under certain localized fire exposure conditions. Two composite box bridge girders, a simply supported girder and a continuous girder respectively, were tested under simultaneous loading and fire exposure. The simply supported girder was exposed to fire over 40% of its span length in the middle zone, and the two-span continuous girder was exposed to fire over 38% of its length of the first span and full length of the second span. A measurement method based on comparative rate of deflection was provided to predict the failure time in the hogging moment zone of continuous composite box bridge girders under certain localized fire exposure condition. Parameters including transverse and longitudinal stiffeners and fire scenarios were introduced to investigate fire resistance of the composite box bridge girders. Test results show that failure of the simply supported girder is governed by the deflection limit state, whereas failure of the continuous girder occurs through bending buckling of the web and bottom slab in the hogging moment zone. Deflection based criterion may not be reliable in evaluating failure of continuous composite box bridge girder under certain fire exposure condition. The fire resistance (failure time) of the continuous girder is higher than that of the simply supported girder. Data from fire tests is successfully utilized to validate a finite element based numerical model for further investigating the response of composite box bridge girders exposed to localized fire. Results from numerical analysis show that fire resistance of composite box bridge girders can be highly influenced by the spacing of longitudinal stiffeners and fire severity. The continuous composite box bridge girder with closer longitudinal stiffeners has better fire resistance than the simply composite box bridge girder. It is concluded that the fire resistance of continuous composite box bridge girders can be significantly enhanced by preventing the hogging moment zone from exposure to fire. Longitudinal stiffeners with closer spacing can enhance fire resistance of composite box bridge girders. The increase of transverse stiffeners has no significant effect on fire resistance of composite box bridge girders.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.95-104
• /
• 2008

본 연구에서는 경부고속철도상의 대표적인 교량인 2경간 연속보 형태의 고속철도 교량에 대하여 동적거동을 해석하고 공진발생의 감소방안들을 제시하였다. 하중은 한국형 고속철도하중인 총길이 380.15 m의 TGV-K 열차(2P+18T)가 일정한 속도로 이동하는 것으로 하였다. 동적거동을 모사하는 지배방정식은 질량과 강성이 분포된 연속계에서 만들어진 편미분방정식을 이용하여 구하였으며 Duhamel 적분을 이용한 모달계수의 처리를 수반하는 모드중첩법을 이용하여 동적해석을 수행하였다. 열차의 주행속도에 관계없이 동적거동을 급격히 감소시킬 수 있는 지간장이 존재하였으며 지금까지 연구된 단순보 형태의 교량에서 분석된 결과와는 달랐다. 열차의 주행속도에 의존하여 동적응답이 급격히 증가되어 공진현상을 일으키는 경우에도 공진을 감소시킬 수 있는 여러 방안들을 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.39-46
• /
• 2023

이 연구에서는 차세대 고속철의 증가하는 주행속도에 따라 600 km/h 까지 10 km/h 간격으로 고속철 PSC 박스 연속교량의 교량받 침에 대한 동적거동을 수치해석하였다. 경부 고속철 구간의 40미터 단경간과 2경간 연속 PSC 박스교를 연구대상으로 프레임모형을 구성하였 으며, 38자유도의 관성질량 차량모형 및 교량과 궤도의 불규칙성을 포함한 상호작용력을 고려하였다. 주행속도별 교량받침의 종방향 변위와 누적이동거리와 변위속도를 산정하여 교량의 동적거동 추이분석과 비교하였다. 또한 마찰판의 내구성능평가를 위한 장기마찰시험 기준을 적 용하였다.

• 대한토목학회논문집
• /
• 제28권4A호
• /
• pp.417-429
• /
• 2008

본 연구에서는 단재하경로 구조로 인식되는 연속 2-거더교에서 한 개 거더에 심각한 균열 손상의 발생 시 여유도를 평가하기 위한 실험적 연구를 수행하였다. 하부 수평브레이싱이 여유도에 미치는 영향을 평가하기 위해 실험변수는 하부 수평브레이싱으로 하고 하부 수평브레이싱을 설치한 경우와 설치하지 않은 1/5 모형 시험체 2개를 제작하였다. 그리고 각 시험체에 대해 측경간의 한 개 거더에 인위적으로 손상을 가한 후 종국상태에 이르기까지 재하 실험을 수행하였다. 실험으로부터 하부 수평브레이싱이 없는 시험체에 비해 설치된 경우가 1.2배 정도 높은 내하 성능을 갖는 것으로 나타났다. 실제 교량의 고정하중효과를 반영하기 위한 전산해석을 수행하고, 이로부터 여유도 평가를 수행한 결과, 2-거더교가 연속교 형식으로 적용되면 수평브레이싱이 없어도 적절한 여유도를 갖는 것으로 나타났으며, 수평브레이싱이 설치되면 1.8배 정도의 여유도가 향상되는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.995-1000
• /
• 2000

Segmentally erected prestressed concrete box girder bridges have been widely used in Korean high speed railway. Segmental erection has been accomplished along the longitudinal direction and across the depth of cross section. The cross section is similar to a composite cross section, composed of old and new segments. Because these segments have different time-dependent creep and shrinkage properties, a stress redistribution takes place during the construction period. It is the main objective in this research to investigate this behavior. An actual bridge was instrumented with 96 vibrating wire embedded type strain gauges, 6 electronic type steel strain gauges, and 75 thermocouples. Two span continuous high speed railway bridge was selected. Two points of importance, such as the midpoint of the first span and the point of interior support, along the span of the girder were chosen to monitor the time dependent behaviors for an extended period of time. The data collection was starting just after concrete girder were cast and is still going on. According to the measured results, the strain distributions across the depth of the section at midspan and interior support were not continuous and the important redistribution of stresses takes place. Thus, rational design of prestressed concrete composite box girder bridges need.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.313-318
• /
• 1999

The seismic performance of multi-span bridge without seismic detailing is found to be insufficient in longitudinal direction. Shear keys and stoppers can be introduced as an alternative to enhance seismic capacity. The capacity curve of bridge with shear keys is obtained considering two extreme contact conditions of shear keys. Its curve is converted into ADRS spectra and compared with demand spectra. It is concluded that seismic performance can be improved effectively by shear keys and its performance can be evaluated graphically on the ADRS specta.

• Structural Engineering and Mechanics
• /
• 제73권2호
• /
• pp.133-141
• /
• 2020

This paper presents the applicability of series tuned mass dampers (STMDs) to reduce the multiple resonant responses of continuous railway bridges under high-speed train. The bridge is modeled by two-span Bernoulli-Euler beam with uniform cross-section, and a STMD device consisting of two TMD units installed on the bridge to reduce its multiple resonant vibrations. The system is assumed to be under the action of a high-speed train passage which is modeled as a series of moving forces. Sequential Programming Technique (SQP) is carried out to find the optimal parameters of the STMD that minimizes the maximum peak responses of the bridge. Comparisons with the results available in the literature are presented to demonstrate the effectiveness and robustness of STMD system in reducing the multiple resonant responses of the continuous railway bridges under high-speed trains.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.125-130
• /
• 2001

A existing design method of PSC girder bridges, according to total service loads, stress required tendon force at a time. Because this design method increases beam depth, design of long span is difficult. However, As UC girder stressing at difficult loading stages reduces sectional depth of PSC girder, both design and operation of long span bridges is possible. so, this study analyzes the effect of design parameter (Girder Strength, Girder Spacing, Span Length, Joint Strength) on the beam depth of IPC girder continuous bridges, and shows sectional depth of UC girder for design of long span bridges. According to analysis, when a continuous bridges of same length span is at strength of joint over strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed and when a continuous bridges of different span length is at strength of joint below strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed. In two case, a change of beam depth is mostly observed over strength of girder of 350kg/$cm^{2}$ according to analysis of deflection data, a continuous bridges of IPC girder is nearly satisfied.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.797-802
• /
• 1997

The current study is a part of series o research about the development of new superstructure system to overcome the engineering problems in the design of bridges of 30m to 45m in span length using the existing bridge systems. The basic concept of new system is the continuation of adjacent tow simple spans composed of the precast prestressed concrete U-type sections. The partial post tensioning method is applied to create the continuity. In this study, the new technique was introduced and applied with an example design of tow span of 40m in span length to find the possibility for practical application as the feasibility study. The obtained results show that the new splicing method is expected to offer significant economical and serviceability advantages.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.173-180
• /
• 2001

In this study steel box girders used as main members of a two span continuous steel bridge, are optimally designed by a Load and Resistance Factor Design method(LRFD) using an numerical optimization method. The width, height, web thickness and flange thickness of the main girder are set as design variables, and light weight design is attempted by choosing the cross-sectional area as an object function. We studied the results of steel box girders and compared with those of 1-type girders. The main program is coded with C++ and connected with optimization modul ADS. which is coded with FORTRAN.