• Journal of Life Science
• /
• v.15 no.4 s.71
• /
• pp.578-583
• /
• 2005

Cell-free culture broth of marine halophilic bacterium, Kordia algicida was shown to possess specific algicidal ability against red tide organism, Cochlodinium polykrikides. Physiochemical characteristics of algicidal material originated in the bacterial culture broth were analyzed that its molecular weight was estimated to a 3,000 dalton and it was stable in heat and pH treatment. The algicidal fraction against C. polykrikoides obtained from gel permeable chromatography contained high concentration of ammonium ion as analyzed by ICP/Mass spectrum. C. polykrikoides by the fraction was quickly lysed within 1 min. It was shown that the effective concentration for algicide against C. polykrikoides was over 1mM of ammonium chloride. On the other hand, other metal ions presented in the algicidal fraction showed no algicidal effect against C. polykrikoides. In additon, ammonium ion exhibited species-specific killing spectrum for two species of red tide organisms, C. polykrikoides and Gymnodinium sanguieum. Therefore, further researches on the killing mechanism against C. polykrikoides exerted by ammonium ion, and subsequent development of replaceable algicidal materials will perform to provide useful tools for the control of red tide.

• Journal of Environmental Health Sciences
• /
• v.21 no.3
• /
• pp.87-95
• /
• 1995

A rapid and selective co-extraction systems of copper and zinc-thiocyanate complex into various types of alkylamine for the simultaneous determination of two metal ions by atomic absorption spectrometry and ion chromatograph have been proposed. The quantitative extractions of Cu(II) and Zn(II) at 0.1 M-thiocyanate and 0.1 M-HCI were achieved with Aliquat 336-$CHCl_3$. The detection limits of Cu and Zn were 2 ppb and 0.9 ppb respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.490-490
• /
• 2011

Graphene, hexagonal network of carbon atoms forming a one-atom thick planar sheet, has been emerged as a fascinating material for future nanoelectronics. Huge attention has been captured by its extraordinary electronic properties, such as bipolar conductance, half integer quantum Hall effect at room temperature, ballistic transport over ${\sim}0.4{\mu}m$ length and extremely high carrier mobility at room temperature. Several approaches have been developed to produce graphene, such as micromechanical cleavage of highly ordered pyrolytic graphite using adhesive tape, chemical reduction of exfoliated graphite oxide, epitaxial growth of graphene on SiC and single crystalline metal substrate, and chemical vapor deposition (CVD) synthesis. In particular, direct synthesis of graphene using metal catalytic substrate in CVD process provides a new way to large-scale production of graphene film for realization of graphene-based electronics. In this method, metal catalytic substrates including Ni and Cu have been used for CVD synthesis of graphene. There are two proposed mechanism of graphene synthesis: carbon diffusion and precipitation for graphene synthesized on Ni, and surface adsorption for graphene synthesized on Cu, namely, self-limiting growth mechanism, which can be divided by difference of carbon solubility of the metals. Here we present that large area, uniform, and layer controllable graphene synthesized on Cu catalytic substrate is achieved by acetylene-assisted CVD. The number of graphene layer can be simply controlled by adjusting acetylene injection time, verified by Raman spectroscopy. Structural features and full details of mechanism for the growth of layer controllable graphene on Cu were systematically explored by transmission electron microscopy, atomic force microscopy, and secondary ion mass spectroscopy.

• BMB Reports
• /
• v.49 no.12
• /
• pp.681-686
• /
• 2016

Fructose 1,6-bisphosphate aldolase (FBA) is important for both glycolysis and gluconeogenesis in life. Class II (zinc dependent) FBA is an attractive target for the development of antibiotics against protozoa, bacteria, and fungi, and is also widely used to produce various high-value stereoisomers in the chemical and pharmaceutical industry. In this study, the crystal structures of class II Escherichia coli FBA (EcFBA) were determined from four different crystals, with resolutions between $1.8{\AA}$ and $2.0{\AA}$. Native EcFBA structures showed two separate sites of Zn1 (interior position) and Zn2 (active site surface position) for $Zn^{2+}$ ion. Citrate and TRIS bound EcFBA structures showed $Zn^{2+}$ position exclusively at Zn2. Crystallographic snapshots of EcFBA structures with and without ligand binding proposed the rationale of metal shift at the active site, which might be a hidden mechanism to keep the trace metal cofactor $Zn^{2+}$ within EcFBA without losing it.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.719-726
• /
• 1996

DLTS measurements were performed to study the annealing induced changes of the trap centers in MOV and to shed more light on the stability mechanism of the MOV. Two electron traps, Ec-0.26[eV] and Ec-(O.2-0.3)[eV], were observed in the unannealed samples in large quantities(7-9 X 1014[CM 3]), whereas the three electron traps Ec-0.17 [eV], Ec-0.26[eV] and Ec-(O.2-0.3)[eV] were observed far less in the annealed samples. The minima in the Ec-0.26[eV] trap density, coupled with the presented results that unannealed devices are unstable whereas 600.deg. C annealed devices are most stable, suggests that the instability of the MOV under long term electrical stressing is related to the Ec-0.26[eV] trap. This results support that the ion migration model for the device instability where the Ec-0.26[eV] defects may be the interstitial zinc or the migrating ions. The interstitial zinc originated as a result of the nonstoichiometric nature of ZnO might cause the degradation of the I-V characteristics of the MOV with long term electrical stressing.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.5
• /
• pp.298-303
• /
• 1988

Kinetic studies on cupric ion ($Cu^{2+}$) oxidation of 1-benzyl- and 1-aryl-1,4-dihydronicotinamides (XNAH) in aqueous solution were performed. In the presence of dioxygen ($O_2$), the reaction followed first order kinetics with respect to both XNAH and $Cu^{2+}$. The oxidation reaction was found to be independent and parallel to the acid-catalyzed hydration reaction of XNAH. The catalytic role of $Cu^{2+}$ for the oxidation of XNAH in the presence of $O_2$ was attributed to $Cu^{2+}/Cu^+$ redox cycle by the reactions with XNAH and $O_2$. The second order rate constants of the Cu2+ oxidation reaction kCu, and acid-catalyzed hydration reaction $k_H$ were strongly dependent on the nature of the substituents in 1-aryl moiety. The slopes of log $k_{Cu}$ vs log $K_H$ and log $k_{Cu}$ vs ${\sigma}_p$ of the substituents plots were 1.64 and -2.2, respectively. This revealed the greater sensitivity of the oxidation reaction rate to the electron density on the ring nitrogen than the hydration reaction rate. A concerted two-electron transfer route involving XNAH-$Cu^{2+}$ complex was proposed for mechanism of the oxidation reaction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.9 no.1
• /
• pp.59-73
• /
• 1980

A detailed procedure was described for the isolation of cratine kinase (ATP-Creatine phosphotransferase, E. C. 2. 7. 3. 2.) from the muscle of the snake Bungarus fasciatus. The original isolation procedure of Kuby et al. for the rabbit muscle enzyme has been modified and extended to include a chromatographic step. The properties of the enzyme have been investigated and kinetic constants for the reverse reactions determined as the followings: 1) A molecular weight of the enzyme was determined by gel filteration on Sephadex G-100 and by electrophoresis on SDS-polyacrylamide was 86,000. 2) Two reactive sulphydryl groups were detected with dithiobis nitrobenzoic acid (DTNB). 3) The nucleotide substrate specificity in the reverse reaction was determined as ADP*2'-dADP＞GDP＞XDP＞UDP with magnesium as the activating metal ion. 4) The order of the metal specificity in the reverse reaction Mg>Mn>$Ca{\sim}Co$ was determined with ADP as substrate. 5) A detailed kinetic analysis was carried out in the reverse direction with $MaADP^-$ as the nucleotide substrate. Initial velocity and product inhibition studies($MaADP^{2-}$ competitive with respect to MgADP- and noncompetitive with respect to $N-phosphorycreatine^{2-}$ ; Creatine competitive with respect to $N-phosphorycreatine^{2-}$ and noncompetitive with respect to Ma $ADP^-)$ indicated that the reaction obeyed a sequential mechanism of the rapid equilibrium random type.

• Korean Journal of Metals and Materials
• /
• v.47 no.5
• /
• pp.316-321
• /
• 2009

Co nanoparticles on silica substrates were fabricated by inducing a thin-film dewetting through two different processes-furnace annealing and pulsed-laser annealing. The effects of annealing temperature, film thickness and laser energy density on dewetting morphology and mechanism were investigated. Co thinfilms with thicknesses between 3 to 15 nm were deposited using ion-beam sputtering, and then, in order to induce dewetting, thermally annealed in furnace at temperatures between 600 and $900^{\circ}C$. Some as-deposited films were irradiated using a Nd-YAG pulsed-laser of 266 nm wavelength to induce dewetting in liquid-state. Films annealed in furnace agglomerated to form nanoparticles above $700^{\circ}C$, and those average particle size and spacing were increased with an increase of film thickness. On the laser annealing process, above the energy density of $100mJ/cm^2$, metal films were completely dewetted and the agglomerated particles exhibited greater size uniformity than those on the furnace annealing process. A detailed dewetting mechanism underlaying both processes were discussed.

• Archives of Pharmacal Research
• /
• v.26 no.10
• /
• pp.826-831
• /
• 2003

ADP-ribose pyrophosphatase (ADPRase) hydrolyzes ADP-ribose (ADPR) into AMP and ribose-5'-phosphate. It is classified into two groups, $Mg^{2+}$-dependent and $Mg^{2+}$-independent ADPRase, depending on its $Mg^{2+}$requirement. Here, we purified $Mg^{2+}$-dependent ADPRase from rabbit liver and examined what factors affect $Mg^{2+}$ requirement. The purified enzyme showed a single band with the molecular weight of 34 kDa on SDS-PAGE both in the presence and absence of 2-mercaptoethanol. The molecular weight of the native enzyme calculated by gel filtration was 68 kDa, indicating that ADPRase is a dimer made up of two identical subunits. $Mg^{2+}$-dependent ADPRase with the highest ADPR affinity had a $K_m$ of 160$\pm$10 $\mu$M and a pH optimum of around pH 9.5. Treatment of the purified ADPRase with heated cytosol fractions at 37$^{\circ}C$ for 3 h caused some changes in the chemical properties of the enzyme, including an increase in molecular weight, a decrease in solubility, and a loss of $Mg^{2+}$-dependency. The molecular weight of the cytosol-treated ADPRase measured by gel filtration was over 420 kDa, suggesting, for the first time, that ADPRase could be polymerized by undefined cytoplasmic factors, and that polymerization is accompanied by changes in the solubility and metal ion dependency of the enzyme.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.382-382
• /
• 2012

Nanostructures have a larger surface/volume ratio as well as unique mechanical, physical, chemical properties compared to existing bulk materials. Materials for biomedical implants require a good biocompatibility to provide a rapid recovery following surgical procedure and a stabilization of the region where the implants have been inserted. The biocompatibility is evaluated by the degree of the interaction between the implant materials and the cells around the implants. Recent researches on this topic focus on utilizing the characteristics of the nanostructures to improve the biocompatibility. Several studies suggest that the degree of the interaction is varied by the relative size of the nanostructures and cells, and the morphology of the surface of the implant [1, 2]. In this paper, we fabricate the nanowires on the Ti substrate for better biocompatible implants and other biomedical applications such as artificial internal organ, tissue engineered biomaterials, or implantable nano-medical devices. Nanowires are fabricated with two methods: first, nanowire arrays are patterned on the surface using e-beam lithography. Then, the nanowires are further defined with deep reactive ion etching (RIE). The other method is self-assembly based on vapor-liquid-solid (VLS) mechanism using Sn as metal-catalyst. Sn nanoparticle solutions are used in various concentrations to fabricate the nanowires with different pitches. Fabricated nanowries are characterized using scanning electron microscopy (SEM), x-ray diffraction (XRD), and high resolution transmission electron microscopy (TEM). Tthe biocompatibility of the nanowires will further be investigated.