• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.646-656
• /
• 2012

This study area was Saemangeum Reservoir in Korea and the applied model was Environmental Fluid Dynamics Code(EFDC). It was the same as the scenarios to the boundary and initial conditions except the resolutions of the model grids. The resolutions were about 800 and 2,000 cells. It was considered scenario 1 and 2. The model was performed to simulate the water temperature, salinity, water quality parameters such as dissolved oxygen(DO), chemical oxygen demand(COD), total nitrogen(T-N), and total phosphorus(T-P) at 2008. The simulation results of the two scenarios were reflected in the trend of observed data tolerably. However, water flow, water temperature, and salinity showed high confidence level at the scenario 1. The water quality items did not present high confidence level at the scenario 1 because which concept was considered to biochemical and physical processes. This result shows that grid resolution has an influence on the water transport and the effect is reflected directly shallow and narrow water area. But, the selection of grid resolution should be considered the purpose of model simulation and the process of target items.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.810-814
• /
• 2002

According to the image level definition for KOMPSAT-2 in KOMPSAT-2 Ground Station Specification, the level 0 is frame formatted, unprocessed data at full resolution; any and all communications artifacts (e.g., synchronization frames, communications headers) removed. The level 0 is used for two purposes: 1) exchange of imagery between image receiving & processing element (IRPE), and 2) image transfer from the Receiving & Archiving Subsystem to Search & Processing Subsystem. On-board processing of imagery data of KOMPSAT-2 includes JPEG-like compression and encryption besides conventional CCSDS packetization. The encryption is used to secure imagery data from any intervention during downlink and compression allows real-time downlink of image data reducing data rate produced from the camera. While developing ground receiving system for KOMPSAT-2, it was necessarily to define level 0 products. In this paper, we will suggest level 0 product definition for KOMPSAT-2 and explain reasons of the decisions made. The key factor used while defining the level 0 products is the efficiency of whole ground receiving system. The latter half of the paper will explain the implementation of software that generates level 0 products. The necessary steps to produce level 0 products will be explained, and the performance achieved will be presented.

• Journal of Korean Public Health Nursing
• /
• v.21 no.1
• /
• pp.46-56
• /
• 2007

Purpose: This study attempted to identify the sexual function (ALARM: Activity, Libido, Arousal and orgasm, Resolution, Medical history) of patients who have had an ostomy for the development of an ALARM sexual counseling program. Method: Subjects for this descriptive study were recruited from the outpatient clinic of a university affiliated medical center and peer group. Fifty-two subjects who have had an ostomy and lived with their spouse were selected. Instruments were developed by researchers based on the ALARM model by Anderson (1990). Results: In the subject group, 32.7% patients were not sexually active and 76.9% hesitated to have sexual activity because of the stoma. The mean score of resolution was 13.2 (range: 8-32), with a higher score for couple's intimacy indicating a higher level of libido and resolution. Conclusion: This study presents a series of clinical guidelines that nurses can use to accurately assess sexual health issues and select appropriate sexual counseling for patients with an ostomy.

• Korean Journal of Remote Sensing
• /
• v.23 no.3
• /
• pp.153-160
• /
• 2007

Forest cover density studies using high resolution satellite data and object oriented classification are limited in India. This article focuses on the potential use of QuickBird satellite data and object oriented classification in forest density mapping. In this study, the high-resolution satellite data was classified based on NDVI/pixel based and object oriented classification methods and results were compared. The QuickBird satellite data was found to be suitable in forest density mapping. Object oriented classification was superior than the NDVI/pixel based classification. The Object oriented classification method classified all the density classes of forest (dense, open, degraded and bare soil) with higher producer and user accuracies and with more kappa statistics value compared to pixel based method. The overall classification accuracy and Kappa statistics values of the object oriented classification were 83.33% and 0.77 respectively, which were higher than the pixel based classification (68%, 0.56 respectively). According to the Z statistics, the results of these two classifications were significantly different at 95% confidence level.

• International Journal of Contents
• /
• v.8 no.2
• /
• pp.75-81
• /
• 2012

This study explores the important causal relationship between the public (domestic) and trade (international) disputes of South Korea and China. To understand the relations between the domestic and international disputes, Putnam's study of the two-level game theory has been conducted in order to analyze the effect of complicated social and political frameworks on international trade disputes. Due to the social and political differences between South Korea and China, this study provides three findings based on negotiation, policy, and strategic approaches.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.146-146
• /
• 2000

This paper presents field test results of the GPS precise positioning using carrier phase observable. The Least-squares AMBiguity Decorrelation Adjustment(LAMBDA) method is implemented to resolve integer ambiguity problem for two epoch Ll carrier phase measurement data. Field test results show that the GPS precise positioning of cm-level accuracy is obtainable with conventional low cost, single frequency C/A code GPS receivers.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.377-382
• /
• 1987

To obtain a high resolution microwave images, back scattering microwave fields from one, two, four poles on a rotating object is measured. A computation algorithm to reconstruct these poles images from measured data is programed. The program is tested for these poles on a rotating object for different frequency intervals in the X-Band. The more frequency data yield the reduction of side lobe level. The reconstructed image for the two pole objects having the diameter of 1cm and separated by 1 lamda, 2 lamda (lamda-3.75 cm) from the measured data is shown. And, the image of two objects having the different reflectivity coefficient from the measured data is also shown and it assumes that this reconstructing algorithm from the measured angular spectrum provides quite accurate images.

• Imaging Science in Dentistry
• /
• v.32 no.2
• /
• pp.75-79
• /
• 2002

Purpose : To evaluate the effect of exposure time and image resolution on fractal dimension calculations for determining the optimal range of these two variances. Materials and Methods : Thirty-one radiographs of the mandibular angle area of sixteen human dry mandibles were taken at different exposure times (0.01, 0.08, 0.16, 0.25, 0.40, 0.64, and 0.80 s). Each radiograph was digitized at 1200 dpi, 8 bit, 256 gray level using a film scanner. We selected an Region of Interest (ROI) that corresponded to the same region as in each radiograph, but the resolution of ROI was degraded to 1000, 800, 600, 500, 400, 300, 200, and 100 dpi. The fractal dimension was calculated by using the tile-counting method for each image, and the calculated values were then compared statistically. Results: As the exposure time and the image resolution increased, the mean value of the fractal dimension decreased, except the case where exposure time was set at 0.01 seconds (α = 0.05). The exposure time and image resolution affected the fractal dimension by interaction (p<0.001). When the exposure time was set to either 0.64 seconds or 0.80 seconds, the resulting fractal dimensions were lower, irrespective of image resolution, than at shorter exposure times (α = 0.05). The optimal range for exposure time and resolution was determined to be 0.08- 0.40 seconds and from 400-1000 dpi, respectively. Conclusion : Adequate exposure time and image resolution is essential for acquiring the fractal dimension using tile-counting method for evaluation of the mandible.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.177-187
• /
• 2002

Some kinds of precision optical systems for spaceborne high resolution cameras were designed at preliminary design level and an optical design for a hyperspectral imager was performed for its development model. A Cassegrain-based catadioptric system and an unobscured reflective triplet system are illustrated in detail for spaceborne high resolution electro optical cameras which have performance of 5m resolution at an altitude of 685km and the design are evaluated in its spot-diagram and MTF to prove they have good performance enough to implement the requirements for realistic satellite payload taking the fabrication conditions and the on-orbit operation into consideration. For the development of hyperspectral imager as a next-generation payload, an optical system has been designed and elaborated. It can be divided into two parts, a catoptric telescope forming an off-axis 2 mirror type and a dispersive spectrometer which comprises collimator, grating and reimaging lens cell. From its optical design to the system characteristics are shown with the MTF performance reaching 25% approximately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.459-464
• /
• 2007

Resolution 122 requires to study power limitation applicable for HAPS ground stations to facilitate sharing with space station receivers in 47/48GHz bands. ITU-R Recommendation 1481-1 recommends to improve the side lobe characteristics of HAPS ground station antenna for frequency sharing between FSS system and HAPS system. In this paper, we propose the maximum allowable off-axis e.i.r.p. level of HAPS ground station antennas by considering power limitation to HAPS ground station in Resolution 122, and by improving the side lobe characteristics of HAPS ground station antennas in Recommendation SF.1481-1. The simulation results show that the unfeasible sharing distance between HAPS ground station and FSS earth station can be reduced remarkably, and give the possibility of frequency sharing between two above systems.