• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.6
• /
• pp.613-623
• /
• 2017

A semi-empirical model to predict ship resistance in level ice based on Lindqvist's model is presented. This model assumes that contact between the ship and the ice is a case of symmetrical collision, and two contact cases are considered. Submersion force is calculated via Lindqvist's formula, and the crushing and breaking forces are determined by a concept of energy consideration during ship and ice impact. The effect of the contact coefficient is analyzed in the ice resistance prediction. To validate this model, the predicted results are compared with model test data of USCGC Healy and icebreaker Araon, and full-scale data of the icebreaker KV Svalbard. A relatively good agreement is achieved. As a result, the presented model is recommended for preliminary total resistance prediction in advance of the evaluation of the icebreaking performance of vessels.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.374-381
• /
• 2023

In a previous study, 'response surface methodology (RSM) using a fullest balanced model' was proposed to improve the optimization of food processing when a standard second-order model has a significant lack of fit. However, that methodology can be used when each factor of the experimental design has five levels. In response surface experiments for optimization, not only five-level designs, but also three-level designs are used. Therefore, the present study aimed to improve the optimization of food processing when the experimental factors have three levels through a new approach to RSM. This approach employs three-step modeling based on a second-order model, a balanced higher-order model, and a balanced highest-order model. The dataset from the experimental data in a three-level, two-factor central composite design in a previous research was used to illustrate three-step modeling and the subsequent optimization. The proposed approach to RSM predicted improved results of optimization, which are different from the predicted optimization results in the previous research.

• Journal of Korean Home Economics Education Association
• /
• v.8 no.1
• /
• pp.33-49
• /
• 1996

The objectives of this study were (1) to determine the preferences for three home economics curriculum Models(Concept-based curriculum Model, Competency-based curriculum Model, and Practical Problem-based curriculum Model) of Korean home economics(HE) teachers and HE teacher educators, (2) to determine the difference between HE teachers and HE teacher educators according to purposes of HE, focus of learning, organization of HE subject matter, focus of HE curriculum, focus of HE content, HE knowledge, main questions addressed through HE curriculum, teaching strategies, students’progress, and systems of action, and (3) to determine the relationships between preferences for three curriculum Models and personal and professional characteristics of HE teachers. Respondents in this study were 225 HE teachers and 35 HE teacher educators. The survey method was used in this descriptive study. The survey method was used in this descriptive study. The overall curriculum Model preference of each teacher respondent was determined by counting number of times a given Model among 10 identified variables. The data were analyzed by using Chi-square to compare the differences between the two groups. To determine the relationships between preferences for three curriculum Models and personal and professional characteristics of HE teachers, coefficient of contingency tables was used. Both of HE teacher group(79.4%) and HE teacher educator group(67.6%) preferred the practical problem-based curriculum Model the most. There was a difference between the two groups on preferences for the curriculum Models related to systems of action. No significant difference emerged when Chi-square was applied to determine difference between the two groups on overall preferences for three HE curriculum Model. The chi square values between preferences for three curriculum Model and level of school, type of school were statistically significant. Each contingency coefficient for level of school(middle school and high school) and form of school(private and public school) was 27, which means there is a low association between the preferences and level of school and the preferences and form of school.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.38 no.3
• /
• pp.51-70
• /
• 2013

This paper develops a model to predict the adoption and level of usage of network technology in a two-level supply chain with buyer-supplier relationships. A firm's adoption of a new technology depends not only on its own beliefs of the new technology's costs and benefits, but also on the adoption decisions of other firms in the supply chain. A model first analyzes an individual supplier's decision about a new technology adoption considering with multiple suppliers and buyers. Individual suppliers' decisions are aggregated with a population model to project how new technology diffuses across the supply chain and examine the pattern of diffusion process. This study found that as more firms adopt in initial periods, the total amount of information to the potential adopters in the population increases, and then the number of firms persuaded by the information increases as the process moves up the distribution of adoption process. We consider three factors influencing the diffusion speed of the new technology in a supply chain network : mean benefits, cost sharing, and information provision. This study examines how such factors affect the reduction of threshold levels, which implies that reductions in threshold levels have an aggregate effect by accelerating the rate of adoption. In particular, we explore relationship factors available in practice in a buyer-supplier relationship and numerically examines how these relationship factors contribute to increase the diffusion speed of the technology in a two-level supply chain.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.111-122
• /
• 2009

In this study, flood stage was computed by HEC-RAS, 1-D numerical analysis model and FESWMS-2DH, 2-D numerical model. Flood stages computed by two different models were compared for straight line, dot axle watercourse, dead-zone watercourse, section sudden-changing watercourse, and curved watercourse. From the results, flow velocity and water level were similar in straight watercourse and dot-reduction watercourse. However, there was difference of flow velocity and water level in dead-zone watercourse, sudden expansion, dot-reduction, and curve-watercourse. This result might be influenced by rapid change of watercourse due to dead-zone, the angle of inflow and outflow, and the curvature. Especially in this study, numerical model was applied to Wol-Song-Cheon at Chuncheon in order to analyze the effect of flood stage by two different models. By flowing properties around the bridge and confluence of rivers, it was found that flow velocity and water level was changed. Therefore, it was concluded that a lot of uncertainties are contained in the present bank.

• Journal of Information Processing Systems
• /
• v.14 no.1
• /
• pp.176-190
• /
• 2018

This paper presents a novel convolutional neural network based multi-feature fusion learning method for non-rigid 3D model retrieval, which can investigate the useful discriminative information of the heat kernel signature (HKS) descriptor and the wave kernel signature (WKS) descriptor. At first, we compute the 2D shape distributions of the two kinds of descriptors to represent the 3D model and use them as the input to the networks. Then we construct two convolutional neural networks for the HKS distribution and the WKS distribution separately, and use the multi-feature fusion layer to connect them. The fusion layer not only can exploit more discriminative characteristics of the two descriptors, but also can complement the correlated information between the two kinds of descriptors. Furthermore, to further improve the performance of the description ability, the cross-connected layer is built to combine the low-level features with high-level features. Extensive experiments have validated the effectiveness of the designed multi-feature fusion learning method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.6
• /
• pp.834-844
• /
• 2000

In this study, an off-design performance analysis procedure is developed based on Two-zone model and TEIS model. In Two-zone model, there are both primary zone and secondary zone for an isentropic core flow and an average of all non-isentropic streamtubes respectively. The level of the core flow diffusion in an impeller is calculated by using TEIS model which regards the impeller as two successive rotating elements in series. At impeller exit, the mixing process occurs with an increase in entropy, that is to say, a decrease in total pressure. In loss models including Two-zone and TEIS model, some empirical parameters have a great influence on overall performance curve. So these parameters' influences on the overall performance curve are investigated and compared with experimental data.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.75-78
• /
• 1994

Clinically, proximal bone resorption in the femur is frequently seen postoperatively on the follow up X-rays after total hip replacement(THR). We developed the finite element model of cementless THR. The model is two dimensional side plate model, whereby the three dimensional structural integrity of the bone can be accounted for by a separate two dimensional mesh, a side plate. The subject of this article is the development and application of this two dimensional side plate FEM to study the reverse effect of the various degree of bone resorption of femur after THR. The results of this study indicates that two dimensional side plate model is good and simple alternative to complex three dimensional model and the severity of the proximal bone resorption has the effect of more increasing stress on the cortex at the level of femoral stem tip.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.625-628
• /
• 2012

In this letter, a novel method for localizing a user in a smart home environment is presented. We propose a two-level structure, in which the first level determines an occupant's location in the block level using RSSI in a ZigBee network, while the second level accurately estimates the occupant's location using a particle filter to handle the variations in the signal strength measurement. We devise an experimental setup with people performing significant tasks in the smart home. The results obtained from the testbed indicate that the proposed model leads to an improvement in the mean distance error.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1495-1507
• /
• 2022

The improvement of thermal-hydraulic analysis techniques is essential to ensure the safety and reliability of nuclear power plants. The one-dimensional two-fluid model has been adopted in state-of-the-art thermal-hydraulic system codes. Current constitutive equations used in the system codes reach a mature level. Some exceptions are the partition method of wall friction in the momentum equation of the two-fluid model and the interfacial drag force model for a horizontal two-phase flow. This study is focused on deriving the partition method of wall friction in the momentum equation of the two-fluid model and modeling the interfacial drag force model for a horizontal bubbly flow. The one-dimensional momentum equation in the two-fluid model is derived from the local momentum equation. The derived one-dimensional momentum equation demonstrates that total wall friction should be apportioned to gas and liquid phases based on the phasic volume fraction, which is the same as that used in the SPACE code. The constitutive equations for the interfacial drag force are also identified. Based on the assessments, the Rassame-Hibiki correlation, Hibiki-Ishii correlation, Ishii-Zuber correlation, and Rassame-Hibiki correlation are recommended for computing the distribution parameter, interfacial area concentration, drag coefficient, and relative velocity covariance of a horizontal bubbly flow, respectively.