• Korean Journal of Occupational Health Nursing
• /
• v.15 no.2
• /
• pp.115-125
• /
• 2006

Purpose: This study analyzed the amount of stress and the different effects according to the working times(hours) of a week in two groups: more than 40 hours a week and less than 40 hours a week. Method: The study was conducted from November 1st 2005 to December 15th 2005. The purpose of the study has already been explained in the experiment objectives. 20 copies of evaluation forms were sent by mail to 50 different health sections of participating work sites. A total of 1,000 copies were sent out and 870 were sent back. Within the forms, sent back 120 copies had insufficient data, so 750 copies of evaluation forms were analyzed. Result: Working stress for under 40 hours of working time showed a total of 46.10 points and 47.18 for over 40 hours of working time. For over 40 hours, job demand and occupational climate was high and under 40 hours showed a high rate of job control. For under 40 hours of working time, the factors that caused stress were female, irregular diet habit, age of 30's, nonmanufacturing, and single. For over 40 hours of working time, the factors that causes stress were age of over 40, when the number of employees is 500~999, high rate of fatigue, when the position of the employee is higher then section chief, and when the work amount is high. Conclusion: The stress rate showed significantly higher in over 40 hours of working time. Therefore, adequate working hour distribution and health promotion programs are needed. The factors that cause stress in both under and over 40 hours of working time differed. Therefore, a distinguished program to control work stress for additional working time is needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.11-18
• /
• 2012

This paper deals with the numerical determination of the stress intensity factors of cracked aluminum plates under the mixed mode of $K_I$ and $K_{II}$ in glass-epoxy fiber reinforced composites. For the stress intensity factors, two different models are reviewed such as VCCT and two-step extension method. The p-convergent partial layerwise model is adopted to determine the fracture parameters in terms of energy release rates and stress intensity factors. The p-convergent approach is based on the concept of subparametric element. In assumed displacement field, strain-displacement relations and 3-D constitutive equations of a layer are obtained by combination of 2-D and 1-D higher-order shape functions. In the elements, Lobatto shape functions and Gauss-Lobatto technique are employed to interpolate displacement fields and to implement numerical quadrature. Using the models and techniques considered, effects of composite laminate configuration according to inclined angles and adhesive properties on the performance of bonded composite patch are investigated. In addition to these, the out-of-plane bending effect has been investigated across the thickness of patch repaired laminate plates due to the change of neutral axis. The present model provides accuracy and simplicity in terms of stress intensity factors, stress distribution, number of degrees of freedom, and energy release rates as compared with previous works in literatures.

• Journal of Korean Academy of Nursing
• /
• v.28 no.2
• /
• pp.358-368
• /
• 1998

This was designed to identify the relationship of perceived stress, ways of coping, and stress response in student nurses. The subjects of this study were 320 student nurses from two universities and three junior colleges located in Seoul. The data were collected from November 28 to December 10, 1997 by a questionnaire survey method. The instruments for this study were the perceived stress scale developed by Levenstein(1993), ways of coping scale developed by lazarus & Folkman (1984), and the stress response scale developed by Choi(1991). The data were analyzed by SAS program, using descriptive statistics, Pearson correlation coefficient, and ANOVA. The results are summarized as follows : 1. The mean score for the level of perceived stress was 2.55. 2. The mean score for the level of problem oriented coping was 1.61 and the mean score for the level of emotional oriented coping was 1.37. 3. The mean score for the level of stress response was 3.74. Stress was classified into nine factors and the order of scoring for the most frequent was ; assignments(3.98), as a nurse(3.97), interpersonal relationship(3.88). 4. The relationship between perceived stress and stress response revealed a positive significant correlation(r=0.23, p=0.0001) 5. The relationship between emotional oriented coping and stress response revealed a positive significant correlation(r=0.22, p=0.0001). 6. The relationship between perceived stress and emotional oriented coping revealed a positive significant correlation(r=0.13, p=0.020). In conclusion, this study revealed that the level of perceived stress and ways of coping were important factors influencing the stress response of student nurses. Therefore, in consideration of perceived stress, ways of coping should be included in the development of a stress management program for student nurses. Further research with an expanded area and subjects is recommended.

• Korean Security Journal
• /
• no.15
• /
• pp.89-105
• /
• 2008

The aim of this study is to examine the primary causes of security guard's stress by conducting a survey of 50 guards engaging in security companies in Seoul and Gyeonggido. The following results are attained by an inductive content analysis of conviction interview data through in-depth interview of qualitative study method. 1. Factors of stress related to personal problems. The stress by personal problems is resulted from two factors. One is the physical strength inferiority, which leads to negative thoughts, dismay, mental conflict and tension. The other is complex about not-specializing security, which causes discord with his/her supervisor or co-workers and a feeling of uneasiness. 2. Factors of stress related to human relationship. The stress due to human relations is constantly resulted from discord with his/her supervisor and inclined to be accumulated. The mental conflict is elated in feeling that the manager's instructions are not right. So this factor makes them want change of occupation. Also working conditions are different from those of their friends, which causes them not to spend a lot of time with their friends. 3. Factors of stress related to domestic life It appears that most security guards are under stress due to their spouses' discontent with a small number of wages. Also it is reported that male guards are under stress in case of unhappy conjugal relations. And security guard's life is restricted much more than that of workers in a general occupation because of standing ready for mobilization and 24-hour service. So some of male guards experienced an early symptoms of a morbid suspicion about their wife's chastity and are suffering from insomnia as an occupational disease.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.67-75
• /
• 1998

This study aimed at he experimental and finite element analytic investigation of the effect of preheating on he residual stress of weldment. In this study, an autogenous arc welding was used on type 304 stainless steel and MARC as F.E.M. common code was utilized in analysis The analyses include transient and moving heat source and thermal properties as function of temperature. During welding, the thermal cycles of four locations in the weldment were recorded to investigate of the behavior of thermal stress and residual stress. The experimental and analytic results had good coincidence and show that there are two factors influencing the formation of welding residual stress in preheat process. One is the elevation of welding equilibrium temperature and the other is the increase of amount of heat input. The former decrease welding residual stress and the latter increase welding residual stress. Therefore, the cumulative effects result in the welding residual stress not being improved significantly with preheating in 304 stainless steel.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.3
• /
• pp.7-25
• /
• 1997

Using the self-evaluation test proposed by D. Girdano, et al., the psycological, and biological causes and personality factors of the stress of the nursing students of K university in local county are measured and analyzed. As fundamental data to overcome these kinds of stress, the overall stress profiles are proposed. The results of this study are ; 1) The freshman group is very susceptible to the stress due to the behavior type and anxiety-reactive personality. 2) The sophomore group is very susceptible to the stress due to frustration, the behavior type and anxiety-reactive personality. 3) Two groups are not susceptible to the stress due to diet and noise. Since the stress is the multi-dimensional phenomena, it is necessary to reduce these stress that the life style of each Individual students be changed and the curriculm and the teaching methodology in nursing school be developed.

• Structural Engineering and Mechanics
• /
• v.57 no.6
• /
• pp.1143-1156
• /
• 2016

This paper presents a comparative study of finite element method (FEM) and analytical method for the plane problem of a layered composite containing an internal perpendicular crack in literature. The layered composite consists of two elastic layers having different elastic constants and heights. External load is applied to the upper elastic layer by means o a rigid punch and the lower elastic layer rests on two simple supports. Numerical simulations are realized by the world wide code ANYS software. Two dimensional analysis of the problem is carried out and the results are verified by comparison with solutions reported in literature. Main goal of the numerical simulation is to investigate the normal stress ${\sigma}_x$(0, y), stress intensity factors at the crack factor and the crack opening displacements.

• Journal of applied mathematics & informatics
• /
• v.8 no.1
• /
• pp.59-69
• /
• 2001

The paper deals with the interaction between three Griffith cracks propagating under antiplane shear stress at the interface of two dissimilar infinite elastic half-spaces. The Fourier transform technique is used to reduce the elastodynamic problem to the solution of a set of integral equations which has been solved by using the finite Hilbert transform technique and Cooke’s result. The analytical expressions for the stress intensity factors at the crack tips are obtained. Numerical values of the interaction efect have been computed for and results show that interaction effects are either shielding or amplification depending on the location of each crack with respect to other and crack tip spacing. AMS Mathematics Subject Classification : 73M25.

• Structural Engineering and Mechanics
• /
• v.26 no.1
• /
• pp.99-109
• /
• 2007

A cracked composite specimen, comprised of an epoxy and an aluminium plate, was fractured under a tensile load. In this paper, two crack configurations were investigated. The first was an artificial center crack positioned in the epoxy plate parallel to the material interface. The other was for two edge cracks in the epoxy plate, again, parallel to the interface. A tensile test was carried out by gradually increasing the applied load and it was verified that the cracks always moved suddenly in an outward direction from the interface. The d/a ratio was gradually reduced to zero, and it was confirmed that the maximum stress intensity factor value for the artificial center crack, $K_{{\theta}{\theta}}^{max}$, approached that of an artificial interface crack,$K_{{\theta}{\theta}}^{ifc\;max}$ (where: 2a is the crack length and d is the offset between the crack and interface). The same phenomenon was also verified for the edge cracks. Specifically, when the offset, d, was reduced to zero, the maximum stress intensity factor value, $K_{{\theta}{\theta}}^{max}$, approached that of an artificial interface edge crack.

• Korean Journal of Psychosomatic Medicine
• /
• v.6 no.2
• /
• pp.228-234
• /
• 1998

The importance of psychological factors in dermatologic disorders has been recognized for several decades. However, there have been few reports on the management of psychodermatologic disorders. Psychodermatologic conditions can be divided into three broad subgroup in the dermatologic point of view ; first, psychiatric disorders manifesting as dermatological symptom, second, dermatoses mainly caused by emotional factors, i.e., stress, or determined by complex psychophysiological mechanism, and third, psychological symptoms secondary to dermatological conditions, i.e., anxiety or depression. This article describes first two major categories of psychodermatologic disorders and attempts to provide brief guideline for each psychodermatologic condition in view of the clinical interface between dermatology and psychiatry.