• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.88-99
• /
• 1999

The purpose of this study was to investigate the physical properties of experimental composite resins made with the spherical and crushed fillers. The 14 experimental composite resins containing 0, 5, 10, 15, 20 and 25%(w/w) in spherical filler group and 0, 10, 20, 30, 40, 50, 60 and 70%(w/w) in crushed filler group, incorporated in a Bis-GMA matrix (Aldrich Co., USA), were made with 1% ${\gamma}$-methoxy silane treated fillers. The polymer matrix was made by dissolving 0.7%(w/w) of benzoyl peroxide(Janssen Chemical Co. Japan) in methacrylate monomer, whereupon 0.7%(v/v) N,N-dimethyl-p-toluidine(Tokyo Kasei Co. Japan) was added to the monomer. The weight percentage of each specific particle size distribution could be determined from a knowledge of the specific gravity, the weight(w/w), and corresponding volume %(v/v) of the filler sample in resin monomer. In crushed silica group and spherical silica group, the diametral tensile strengths and compressive strengths were measured with Instron Testing Machine(No.4467), and analyzed in 14 experimental composite resins made by filler fractions. The shear bond strength of 14 experimental composite resins to bovine enamel was measured with universal testing machine(Instron No.4467). The fracture surfaces were sputter-coated with a gold film and investigated by SEM. The results were as follows; 1. The diametral tensile strength was tendency to increase in crushed silica group, but not in spherical silica group. The highest diametral tensile strength was found in 20% filler fractions of two groups. 2. The compressive strength was higher in 15%(w/w) and 20%(w/w) in spherical silica group than in crushed silica group, but not in spherical silica group. 3. The significant correlation was noticed in increase in shear bond strength in crushed silica group, but not in spherical silica group. 4. The significantly highest shear bond strength was noticed in 50% filler concentration in crushed silica group, and in 15% filler concentration in spherical silica group, it was not significant in relation. 5. In crushed silica group, cut surface of resin matrix and the interface between resin and filler is obvious. In spherical silica group, fractures that occurred through the filler particles were round in shape.

• Journal of Korean Academy of Nursing
• /
• v.14 no.2
• /
• pp.38-46
• /
• 1984

The purpose of this study was to test the effect of the structured preoperative teaching on post-operative recovery and to observe the effects of an structured preoperative teaching on the adult surgical patient's ventilatory function ability, the length of hospital stay, the number of analgesics within a 72 hour postoperative period, the length of early ambulation. The research question investigated in this study was: What would be the effects of a structured preoperative teaching upon the adult surgical patients postoperative recovery? This study was based on a sample of 40 patients who were scheduled for abdominal surgery. They were asssigned alternately to experimental and control group. Among 40 subjects, 20 were placed in the experimental group and 20 in the control group. Preoperative ventilation function testing of control and experimental subjects was done the evening before surgery and before the patient received the structured preoperative teaching. A structured preoperative teaching was given to the subjects in the exporimental group only by writer. Postoperative testing was done the 5th postoperative day. The data were collected over a period of two months, from Aug. 8 to Oct. 31, 1983. For the analysis of the data and test for the hypotheses, the t-test with mean difference was used. The results of this study regarding the four-hypotheses were as follows: 1. Experimental group which received structured preoperative eaching will have more increase to-cough and deep breathe as measured byhis forced vital capacity(FVC), forced expiratory volume 1 (FEV1), maximal voluntary volume 15 (MVV 15) than control group without structured preoperative teaching. The ventilation function ability was more increase in experimental group than in control group, the mean difference was statistically significant at 0.01 level. Hypotheses 1 was supported. 2. Experimental group with structured preoperative teaching will have more reduced the length of hospital stay than control group without structured preoperative teaching. The length of hospital stay of the experimental group and control group were 11.90 days and 16.05 days respectively. However, the difference was. not statistically significant at .05 level. Therefore the hypothese 2 was not supported. 3. Experimental group with structured preoperative teaching will have more reduce the number of analgesics within a 72 hour postoperative period than control group. The number of analgesics within a 72 hour' postoperative period of experimental group and control group were 1.65 times and 2.4 times. The difference was not statically significant at .05 level. Therefore, the hypotheses 3 was not supported. 4. Experimental group with structured preoperative. teaching will have more reduce the length of early ambulation than control group without structured preoperative teaching. The length of early ambulation of experimental group and control group were 2.2 days and 3.5 days respectively The difference was statistically signficant at 0.05 level. Thus the hypothess 4 was supported.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.77-83
• /
• 2006

Ultrasonic nonlinearity has been considered as a solution for the detection of microcracks or interfacial delamination in a layered structure. The distinguished phenomenon in nonlinear ultrasonics is the generation of higher-order harmonic waves during the propagation. Therefore, in order to quantify the nonlinearity, the conventional method measures a parameter defined as the amplitude ratio of a second-order harmonic component and a fundamental frequency component included in the propagated ultrasonic wave signal. However, its application In field inspection is not easy at the present stage because no standard methodology has yet been made to accurately estimate this parameter. Thus, the aim of this paper is to propose an advanced signal processing technique for the precise estimation of a nonlinear ultrasonic parameter, which is based on power spectral and bispectral analysis. The method of estimating power spectrum and bispectrum of the pulse-like ultrasonic wave signal used in the commercial SAM (scanning acoustic microscopy) equipment is especially considered in this study The usefulness of the proposed method Is confirmed by experiments for a Newton ring with a continuous air gap between two glasses and a real semiconductor sample with local delaminations. The results show that the nonlinear parameter obtained tv the proposed method had a good correlation with the delamination.

• Korean Journal of Health Education and Promotion
• /
• v.2 no.1
• /
• pp.31-61
• /
• 2000

Introduction. Despite the fact that half of premature deaths are caused by unhealthy lifestyles such as smoking tobacco, sedentary lifestyle, alcohol and drug abuse and poor nutrition, there are no theoretical models which accurately explain these health promotion related behaviors. This study tests a new model of health behavior called the Model of Health Promotion Behavior. This model draws on elements and frameworks suggested by the Health Belief Model, Social Cognitive Theory, the Theory of Planned Action and the Health Promotion Model. This model is intended as a general model of behavior but this first test of the model uses amount of exercise as the outcome behavior. Design. This study utilized a cross sectional mail-out, mail-back survey design to determine the elements within the model that best explained intentions to exercise and those that best explained amount of exercise. A follow-up questionnaire was mailed to all respondents to the first questionnaire about 10 months after the initial survey. A pretest was conducted to refine the questionnaire and a pilot study to test the protocols and assumptions used to calculate the required sample size. Sample. The sample was drawn from 2000 eligible participants at two blue collar (utility company and part of a hospital) and two white collar (bank and pharmaceutical) companies located in Southeastern Michigan. Both white collar site had employee fitness centers and all four sites offered health promotion programs. In the first survey, 982 responses were received (49.1％) after two mailings to non-respondents and one additional mailing to secure answers to missing data, with 845 usable cases for the analyzing current intentions and 918 usable cases for the explaining of amount of current exercise analysis. In the follow-up survey, questionnaires were mailed to the 982 employees who responded to the initial survey. After one follow-up mailing to non-respondents, and one mailing to secure answers to missing data, 697 (71.0％) responses were received, with 627 (63.8％) usable cases to predict intentions and 673 (68.5％) usable cases to predict amount of exercise. Measures. The questionnaire in the initial survey had 15 scales and 134 items; these scales measured each of the variables in the model. Thirteen of the scales were drawn from the literature, all had Cronbach's alpha scores above .74 and all but three had scores above .80. The questionnaire in the second mailing had only 10 items, and measured only outcome variables. Analysis. The analysis included calculation of scale scores, Cronbach's alpha, zero order correlations, and factor analysis, ordinary least square analysis, hierarchical tests of interaction terms and path analysis, and comparisons of results based on a random split of the data and splits based on gender and employer site. The power of the regression analysis was .99 at the .01 significance level for the model as a whole. Results. Self efficacy and Non-Health Benefits emerged as the most powerful predictors of Intentions to exercise, together explaining approximately 19％ of the variance in future Intentions. Intentions, and the interaction of Intentions with Barriers, with Support of Friends, and with Self Efficacy were the most consistent predictors of amount of future exercise, together explaining 38％ of the variance. With the inclusion of Prior Exercise History the model explained 52％ of the variance in amount of exercise 10 months later. There were very few differences in the variables that emerged as important predictors of intentions or exercise in the different employer sites or between males and females. Discussion. This new model is viable in predicting intentions to exercise and amount of exercise, both in absolute terms and when compared to existing models.

• Journal of Korean Public Health Nursing
• /
• v.15 no.2
• /
• pp.301-313
• /
• 2001

This study was to explore the relationship between nurses' personality type and their job satisfaction level. The subjects of the study were the 364 nurses who were serving at the general surgical department, psychiatric department, pediatric department and emergency room. The hospitals for which they were working were four university hospitals in Daegu and Busan, and six other university hospitals in Seoul were selected as sample hospitals. For data collection, questionnaires were self-reported to the subjects, under their agreement, from May to June, 2000. The following two instruments were used in the study: One was MBTI Test whose Korean version designed and verified to reliability and validity by Kim Jung Taek and Shim Hae Sook(1990): the other was the Nursing Job Satisfaction Instrument, 'The Index of Work Satisfaction' developed by Slavitt, et al.., (1978). The data were analyzed by frequency, t-test, one-way variance analysis, scheffe's post hoc contrast, and Pearson correlation coefficient with SPSS Win 10.0 program. The results this study were as follows ; 1. As a result of testing nurse's personality type by function at each career, it's found that the most personality type was expressed by the ST-type$(37.3\%)$ at 1-5 years, the SF-type$(29.4\%)$ at 6-10 years, the ST-type$(43.3\%)$ at more than 11 years. 2. As a result of testing the disparity in job satisfaction according to career, it appeared that the 6-10 years group showed higher job satisfaction, followed by the 6-10 years$(119.6\%),\;1-5 years(118.6\%)\;and\;more\;than\; 11 years(117.7\%)$ groups. 3. As a result of testing job satisfaction level according to nurse's personality type by function at each career, it's found that the most job satisfaction was expressed by the SF-type(F=8.50, p=0.00l) at 1-5 years. the ST-type(F=30.61, p=0.001) at 6-10 years. the SF-type(F=4.98, p=0.003) at more than 11 years groups. 4. As a result of testing a significant correlation between nurse's personality type by function and job satisfaction level. the SF(r=0.279, p=0.001) and ST(r=0.222, p=0.001) types showed significant positive correlation. and the NF(r=-0.201, p=0.001) and NT(r=-0.402, p=0.001) types revealed significant negative correlation. The nursing management is likely to be done more effectively, if managers in charge of nursing administration carefully reflect nurses' personal opinions in posting and personnel management, keeping in mind that there is a specific personality type that serves to raise job satisfaction at a specific career.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.97-111
• /
• 2004

This study, adopting the pretest-post test experimental study, is designed to find out how the functional electrical stimulation makes effect on the balance of a patient with spasticity of the ankle plantarflexor muscle caused by hemiplegic after stroke. The 46 subjects for this study were randomly sampled out of the patients who were hospitalized from September 1, 2003 to November 30, 2003 in H sanitarium in Yangpyung. The patients were with spasticity of the ankle plantarflexor muscle caused by hemiplegic after stroke and able to walk without supporting implements. The purpose of the study is firstly to analyze the change of ROM, FRTof a patient with spasticity of the ankle plantarflexor muscle when the functional electrical stimulation is applied and secondly to find out how the sex, age, height, weight, part of the diagnosis, duration of pain, experience of relapse and getting hurt from a fall of a patient make effect on the change. The experimental group for the study is divided into two to compare the differences of the effect. The exercising treatment only was performed for the conrtol group, and the functional electrical stimulation to the ankle dorsiflexor muscle as well as the exercising treatment was applied to the experimental group. The ROM test was performed to check the range of motion of the ankle with a double armed universal goniometer. The test was done 3 times to take an average. FRT were performed to check the balance. The statistical test was conducted using the SPSS 10.0/PC program by means of the following methods: χ2-test and t-test for testing homogeneity between the groups; paired t-test, independent sample t-test, F-test, and two-way ANOVA for analyzing the changes before and after the treatment. The levels of statistical significance of all the data were maintained at p<.05. According to the test, ROM has more decreased in experimental group than in control group when the functional electrical stimulation was applied only to the experimental group. However, the significant statistic difference was not shown (p=.059). FRT showed remarkable differences in the experimental group compared to the control group, showing the significant statistic difference (p=.000). On the one hand, the change of ROM, FRT related with the sex, age, height, weight, part of the diagnosis, and experience relapse was a meaningless minimum value. The change of ROM related to the duration of pain and the experience of falling down was also meaningless. However, FRT showed significant statistic difference (p<.05). According to the test above, the application of functional electrical stimulation to a patient with spasticity of the ankle dorsiflexor muscle caused by hemiplegic after stroke makes significant effect on the balance of a patient, but the result has nothing with the sex, age, height, weight, part of the diagnosis, duration of pain, experience of relapse and getting hurt from a fall of a patient. However, it is regarded to give contribution to the balance improvement of a patient. Therefore, this study expects to be a valuable clinical material for a patient with spasticity.

• Structural Engineering and Mechanics
• /
• v.81 no.2
• /
• pp.243-258
• /
• 2022

In this paper, tensile behavior of joint filling has been investigated under experimental test and numerical simulation (particle flow code). Two concrete slabs containing semi cylinder hole were prepared. These slabs were attached to each other by glue and one cubic specimen with dimension of 19 cm×15 cm×6 cm was prepared. This sample placed in the universal testing machine where the direct tensile stress can be applied to this specimen by implementing a special type of load transferring device which converts the applied compressive load to that of the tensile during the test. In the present work, two different joint filling thickness i.e., 3 mm and 6 mm were prepared and tested in the laboratory to measure their direct tensile strengths. Concurrent with experimental test, numerical simulation was performed to investigate the effect of hole diameter, length of edge notch, filling thickness and filling length on the tensile behavior of joint filling. Model dimension was 19 cm×15 cm. hole diameter was change in four different values of 2.5 cm, 5 cm, 7.5 cm and 10 cm. glue lengths were different based on the hole diameter, i.e., 12.5 cm for hole diameter of 2.5 cm, 10 cm for hole diameter of 5 cm, 7.5 cm for hole diameter of 7.5 cm and 5 cm for hole diameter of 10 cm. length of edge notch were changed in three different value i.e., 10%, 30% and 50% of glue length. Filling thickness were changed in three different value of 3 mm, 6 mm and 9 mm. Tensile strengths of glue and concrete were 2.37 MPa and 6.4 MPa, respectively. The load was applied at a constant rate of 1 kg/s. Results shows that hole diameter, length of edge notch, filling thickness and filling length have important effect on the tensile behavior of joint filling. In fixed glue thinks and fixed joint length, the tensile strength was decreased by increasing the hole diameter. Comparing the results showed that the strength, failure mechanism and fracture patterns obtained numerically and experimentally were similar for both cases.

• Asia Marketing Journal
• /
• v.10 no.4
• /
• pp.35-64
• /
• 2009

In an effort to increase our understanding of green buying behavior, the present study proposes and tests a comprehensive model of how values influence attitudes toward the environment and preferences for green products in a cross-cultural setting. Data were collected from a survey with consumers in two cultures, diametrically different on values salient to environmental consumerism, the U.S. and Korea. As a result of model testing both at the national and multi-group levels, a refined, final model is presented. While the core human values were found to relate to environmental attitudes and green buying behavior, the patterns of the relationships among the variables emerged to differ between the two cultures, highlighting the importance of cross-cultural investigations in this area. Results suggest that biospheric values significantly influence environmental attitudes and green consumption in both countries. However, the effects of egoism were significant among American respondents whereas altruism appeared to have a significant influence on attitude and behavior in the Korean sample. Findings of this study should aid international marketers in their understanding of what drives consumers' green buying behavior in different cultural settings.

• The Korean Journal of Pesticide Science
• /
• v.17 no.2
• /
• pp.94-106
• /
• 2013

The proficiency testing for the residue laboratories of pesticide registration was conducted in order to improve the reliability and the ability for pesticide residue analysis. On October 2011 the testing was carried out using the soil collected and kept as the moistened state for five years, which is expected to very low residue levels of pesticides. The soil was fortified with chlorpyrifos, metolachlor and procymidone in a manner similar to prepare soil sample for indoor soil degradation test, and then sub-samples were prepared for the distribution to participants. Some of them were randomly selected for confirm of homogeneity and to ensure the stability of samples at room temperature. Samples were consisted of two soil treated as different levels, one of which was used to the assesment and another used to confirm. In addition, provide three standard solutions, respectively concentration of 10 mg/L, and untreated soil. Forty seven institutions submitted results. The medians of results were used as the assigned values for pesticide residues. Fitness for purpose standard deviation of proficiency test was calculated by applying 20% RSD as the coefficient of variation allowed in the soil residue test. Z-score was applied for evaluation of individual pesticides, and the average of the absolute value of the Z-score for the overall assessment of pesticides. Laboratories evaluated the absolute value of the Z-score less than 2 to fit the case of chlorpyrifos and procymidone were 44, metolachlor 40.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.112-118
• /
• 2012

Purpose: The purpose of this study was to evaluate the difference in shear bonding strength between resin cements to dental materials when a universal primer (Monobond plus) was applied in place of a conventional primer. Materials and methods: Four groups of testing materials: gold alloy (Argedent Euro, n = 16), non precious metal (T-4, n = 20), zirconia (Cercon, n = 20) and glass ceramic (IPS e.max press, n = 20), were fabricated into discs, which were embedded in an acrylic resin matrix. The gold alloy specimens were airborne-particle abraded, 8 of the specimens were coated with Metal primer II, while the remaining 8 specimens were coated with Monobond plus. The non precious and zirconia specimen were airborne-particle abraded then, the control group received Alloy primer coating, while the other was coated with Monobond plus. Glass ceramic specimens were etched. 10 specimens were coated with Monobond-S and the remaining specimens were coated using Monobond plus. On top of the surface, Multilink N was polymerized in a disc shape. All of the specimens were thermal cycled before the shear bonding strength was measured. Statistical analysis was done with Two sample $t$-test or Mann-Whitney U test (${\alpha}$=.05). Results: There were no significant differences in bonding strength depending on the type of primer used in the gold alloy and glass ceramic groups ($P$>.05), however, the bonding strengths of resin cements to non precious metal and zirconia groups, were significantly higher when the alloy primer was used ($P$<.05). Conclusion: Within the limitations of this study, improvement of universal primers which can be applied to all types of restorations is recommended to precious metals and zirconia ceramics. But, the bond strengths of non precious metals and zirconia ceramics were significantly lower when compared to a 10-MDP primer. More research is needed to apply universal primers to all types of restorations.