• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.50-50
• /
• 2006

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.391-392
• /
• 2006

Sintered materials have been applied widely in Valve Seat Inserts (VSI). The amount of wear on VSIs increases when used in gas (LPG, CNG) engines because of their dry environments. In this paper, two newly developed high performance VSI materials for gas engines are introduced. These materials applied new techniques, which are both high performance hard particle and new distribution method of solid lubricant, to increase wear resistance.

• 한국식생활문화학회지
• /
• 제21권3호
• /
• pp.325-329
• /
• 2006

This study was to investigate the effect of the addition of red ginseng powder in Dasik. The addition of red ginseng powder in Dasik that we used with was in the ratio of 0%, 2%, 4%, 6% and 8% of red ginseng powder to Dasik in weight. Also, we used two different kinds of Dasik. One was made of starch and the other was made of flour. The physic-chemical analysis and sensory test were performed on the Dasik. The red ginseng powder added flour and starch Dasik showed lower moisture content and higher ash content compared with the non-added control group. In color analysis, whereas L value lowed at the addition of red ginseng powder, a and b value increased at the addition of red ginseng powder. In mechanical texture test, addition of red ginseng powder starch Dasik showed high hardness, cohesiveness and brittleness. Addition of red ginseng powder flour Dasik showed high springiness and gumminess. In the sensory test, the addition of the red ginseng powder reduced the sweetness and increased the surface color and the flavor. There was no difference in preference between the Dasik with up to 4% of red ginseng powder added and the control group, but the Dasik with 6% or more red ginseng was found undesirable (p<0.05). In conclusion, the Dasik with up to 4% addition of red ginseng powder would be the useful method to fulfill the traditional quality of Dasik. It was also found that the flour Dasik was to be more preferable than the starch Dasik.

• Journal of Nutrition and Health
• /
• 제36권7호
• /
• pp.684-690
• /
• 2003

This study has investigated the bioavailability of calcium in eggshell powder (ESP) for the purpose of reutilizing eggshells as the calcium source. The experiment was designed 2 ${\times}$ 2 factorial method with two sources, CaCO$_3$ and ESP, and two levels, 0.2% and 0.4% calcium. Weanling SD rats were assigned randomly to one of 4 groups and provided by one of the isocaloric, 20% casein based 4 different experimental diets for 4weeks. Deionized water was given and environment was kept from any contamination of minerals. The body weight, diet intake, feed efficiency ratio (FER), bone growth, Ca contents of bones, and apparent absorption were measured. FER (0.38 - 0.40) and kidney weight were not different among groups and the weight and length, Ca content, strength of two bones Tibia and Femur were not affected by Ca sources except Femur Ca content. Ca content of Femur was greater in ESP groups than that of CaCO$_3$ groups. The body weight gain, bone growth, the Ca contents and strength of bones were significantly greater in 0.4% calcium groups suggesting 0.2% calcium is not sufficient for the optimum growth in the growing rats. These results indicate that ESP be a proper Ca source comparable or superior to CaCO$_3$. However the apparent absorption rate of final 3 days of feeding did not support the observed results showing lower rate in ESP than CaCO$_3$ groups. Further study be needed in the absorption aspect.

• 대한치과의사협회지
• /
• 제54권5호
• /
• pp.348-355
• /
• 2016

Ideal autogenous or allogenic bone graft materials should provide 1) stabilization of blood clot, 2) scaffolds for cellular proliferation and differentiation, 3) release of osteogenic growth factors, 4) appropriate resorption profile for remodeling of new bone. Teeth, especially dentin, mostly contain hydroxyapatite and type I collagen which are similar to bone, and could be valuable graft material. Clinically teeth are used as calcined or demineralized forms. Demineralized form of dentin can be more effective as a graft material. But a conventional decalcification method takes time and long treatment time may give negative effects to various osteogenic proteins in dentin. Author used a new clinical method to prepare autogenous teeth, which could be grafted into the removal defects immediately after extraction using vacuum ultrasonic system. The process could be finished within two hours regardless of the form (powder, chip or block). Teeth were processed to graft materials in block, chip, or powder types immediately after extraction. It took 120 minutes to prepare block types and 40 minutes to prepare powder. Clinical cases did not show any adverse response and the healing was favorable. Rapid preparation of autogenous teeth with the vacuum ultrasonic system could make the immediate one-day extraction and graft possible.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.27-30
• /
• 2011

Nano-sized manganese ferrite powders and films, $MnFe_2O_4$, were fabricated by the sol-gel method, and the effects of annealing temperature on the crystallographic and magnetic properties were studied by using X-ray diffractometry, field emission scanning electron microscopy, M$\"{o}$ssbauer spectroscopy, and vibrating sample magnetometry. X-ray diffraction spectroscopy of powder samples annealed above 523 K indicated the presence of spinel structure, and the film samples annealed above 773 K also had spinel structure. The particle size increased with the annealing temperature. For the powder samples, the Mossbauer spectra annealed above 573 K could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of $Fe^{3+}$ ions. Using the M$\"{o}$ssbauer subspectrum area ratio the cation distribution could be written as ($Mn_{0.52}Fe_{0.48}$) $[Mn_{0.48}Fe_{1.52}]$ $O_4$. However the spectrum annealed at 523 K only showed as a doublet due to a superparamagnetic phase. As the annealing temperature was increased, the saturation magnetization and the corecivity of the powder samples increased, as did the coercivity of film samples.

• 한국식품조리과학회지
• /
• 제28권2호
• /
• pp.195-206
• /
• 2012

The purpose of this study was to determined the optimal mixing condition of two different amounts of tomato powder (A), and starch (B) for the preparation of sausage prepared with tomato powder was determined. The content of lycopene was 3 mg/g. The experiment was designed according to the central composite design of response surface, which showed 10 experimental points including 2 replicates for tomato powder and starch. The physiochemical, mechanical, antioxidant activity and sensory characteristics of samples were measured. The results of the physiochemical, mechanical and antioxidant activity analysis of each sample, including pH, moisture content, color L, color a, color b, hardness, chewiness and cohesiveness, total phenolic content and DPPH free radical scavenging activity showed significant differences. The sensory measurements were significantly different in color, flavor, chewiness, overall quality. The optimum formulation, which was calculated using the numerical and graphical method, was determined to be 4.26 g tomato powder and 7.51 g starch.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.49-55
• /
• 2020

In order to improve the electromagnetic shielding rate of Carbon Fiber (CF), it was produced using the nickel nano-powder impregnating method. Using two types of nickel powder having thicknesses of 50 ㎛ and 100 ㎛, and a thermoplastic elastomer resin, a compound containing 10-20% nickel content was mixed and then manufactured through an extruder. The CF coated with the compound was woven and manufactured using a 1-ply specimen. The final nickel content of the specimen was verified using TGA and the distribution of nickel powder on the CF surface was verified using SEM. The metal shows a high shielding rate in the low-frequency band, but the shielding rate decreases at higher-frequency bands. The CF improves at the higher frequency band, and metals reflect electromagnetic waves while carbon absorbs electromagnetic waves. The study of shielding materials, which are stronger and lighter than metal, by using CF lighter than metal and enabling the shielding rate from low-frequency band to high-frequency band, confirmed that the larger the area coated with nickel nano-powder, the better the electromagnetic shielding performance. In particular, CF coated with a thickness of 100 ㎛ has a shielding rate similar to that of copper and can also be used for EV/HEV automotive cables and other applications in the future.

• 자원리싸이클링
• /
• 제23권3호
• /
• pp.44-50
• /
• 2014

본 연구에서는 기존의 cutting 분쇄방식 대신 여러 가지 문제점을 개선한 shear방식 및 2단 disk mill 방식으로 폐타이어를 미분화시켰다. 각 파쇄 또는 분쇄 단계별로 다양한 크기의 고무 칩을 얻을 수 있었다. Shear방식 및 2단 disk mill 방식은 회전 속도와 방향이 다른 두 개의 드럼형의 칼날로 이루어져 있어서 기존의 cutting 방식보다 거친 표면의 미분화 폐타이어 분말을 얻을 수 있었다. 본 연구에서는 주로 shear방식으로 미분화된 폐타이어 분말의 형상을 SEM을 통해 비교하였다. 추가적으로 적절한 크기의 폐타이어 분말이 얻어졌는지를 확인하기 위해 입도분석을 수행하였다.

• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.87-99
• /
• 1991

The effect of oven firing on the color stability and surface texture of extrinsic stains used characterization and color modification of metal cermic restoration were studied by comparing different temperatures and techniques. They were autoglaze technique, applied glaze technique, two step low-fusing glaze technique and one step low-fusing glaze technique. Autoglaze technique and applied glaze technique were air-fired to manufacturer's recommended temperature. Two step low-fusing glaze technique is separated staining and overglazing. Thin slurry of stain powder were air-fired to $1500^{\circ}F$, Overglaze powder powder was then mixed with seam medium and air-fired to $170^{\circ}F$. One step low-fusing glaze technique is combined staining and overglazing. Thin slurry of stain and glaze powder were air-fired to $170^{\circ}F$. The obtained results were as fellows. 1. Slightly significant color differences by colorimeter were found between different stain application and fusion techniques(P<0.05). 2. Two step low-fusing glaze method showed the most rough surface, especially ceramco orage stain(P<0.05). 3. Surface roughness increased gradually in order of autoglaze, applied glaze, one step low-fusing glaze but they were not significantly different(P<0.05). 4. When two step low-fusing glaze was applied, both color measurement and surface texture were sinificantly different from other groups(P<0.05).