• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.980-985
• /
• 2008

This paper presents vehicle road test of a semi-active suspension system equipped with continuously controllable magnetorheological (MR) dampers. As a first step, front and rear MR dampers are designed and manufactured based on the optimized damping force levels and mechanical dimensions required for a commercial middle-sized passenger vehicle. After experimentally evaluating dynamic characteristics of the MR dampers, the test vehicle is prepared for road test by integrating current suppliers, real-time data acquisition system and numerous sensors such as accelerometer and gyroscope. Subsequently, the manufactured four MR dampers (two for front parts and two for rear parts) are incorporated with the test vehicle and a skyhook control algorithm is formulated and realized in the data acquisition system. In order to emphasize practical aspect of the proposed MR suspension system, road tests are undertaken on proving grounds: bump and paved roads. The control responses are evaluated in both time and frequency domains by activating the MR dampers.

• Structural Engineering and Mechanics
• /
• v.58 no.6
• /
• pp.1077-1085
• /
• 2016

In the last few years, many structural monitoring studies have been performed using different techniques to measure structures of different scales such as buildings, dams or bridges. One of the mostly used tools are GPS instruments, which have been utilized in various combinations with accelerometers and some other conventional sensors. In the current study, observation series were recorded for 8 hours with GPS receivers (NovAtel) and Inclination Measurement Sensors mounted on a television tower in Istanbul, Turkey. Each series of observations collected from two different sensors were transformed into a single coordinate system (Local Topocentric Coordinates System). The positional changes of the tower were calculated from the GPS and the inclination data. These changes were plotted in two dimensions (2D) on the same graphic. Thus, the possibility of comparison and analysis were found using the data from both the GPS and the Inclinometer complement each other, in the real test area. The positional changes of the tower were modeled for further examination. As a result, the movement of the tower within an area of $1{\times}1cm^2$ was observed. Based on the results, it can be concluded that inclinometers can be used for monitoring the structural behavior of the tower.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1378-1385
• /
• 2002

The importance of direct genetic, maternal, heterosis and epistatic effects were examined on post-weaning weight, height, length, girth, fat depth and muscle (ratio of stifle to hip width) with dry and wet season gains in these traits. The breeds used were two pure breeds (Jersey and Limousin), the Limousin${\times}$Jersey $F_1$, and two backcrosses ($F_1{\times}$Jersey dams and $F_1{\times}$Limousin dams). Direct genetic effects were large (p<0.001) for all traits except for length. Jersey maternal effects were large for weight, girth, fat depth and muscle in the post-weaning wet season gains which is an evidence of the impact of Jersey dam on progeny beyond weaning. There were large heterosis effects on fat depth and muscle relative to other traits. Epistatic effects were observed for post-weaning performance in weight, girth, fat depth and muscle. There are indications that there were different genetic effects for post-weaning compared to preweaning growth traits. Thus, it could be hypothesized from this study that different quantitative trait loci (QTL) affect early and late growth in Jersey and Limousin cross cattle breeds. The follow up work will examine the different chromosomal gene effects on pre- and post-weaning growth.

• Journal of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.293-298
• /
• 1963

The crystal structure of ethylenediamine dihydrochloride has been determined by the two-dimensional Patterson methods and refined by two-dimensional Fourier syntheses. The unit cell dimensions are a = 4.44${\pm}$0.02, b = 6.88${\pm}$0.02, c = 9.97${\pm}$0.02 ${\AA}$, ${\beta}$ = 92${\pm}$$1^{\circ}$. The space group is $P2_1_{/c}$. The carbon and nitrogen atoms in the ethylenediamine itself lie on one plane and its structure has a trans-form with a centre of symmetry in it, and C-C distance of 1.54 ${\AA}$, C-N distance of 1.48${\AA}$ and C-C-N bond angle of $109.07^{\circ}$. The molecules are linked by N-H${\cdots}$Cl hydrogen bonds with distance of 3.14, 3.16 and 3.22 ${\AA}$ forming three dimensional network. The values of reliability factor for F(okl), F(hol) and F(hko) are 0.11, 0.10 and 0.09 respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.606-611
• /
• 2012

An analysis and design method for reducing aerodynamic noise in high-speed trains based on biomimetics of noiseless flight of owl is proposed. Wind tunnel testing and numerical CFD (Computational Fluid Dynamics) simulation for the basic inter-coach spacing model are carried out, and their results compared. To determine the effect of scaling of the owl's flight feather on the noise reduction, two-fold and a four-fold scaled up model of the feather are constructed, and the numerical simulations are carried out to obtain the aerodynamic noise levels for each scale. Original model is found to reduce the noise level by 10 dB, while two-fold increase in length dimensions reduces the noise by 12 dB. Validation of numerical solution using wind tunnel experimental measurements are presented as well.

• Korean Journal of Occupational Health Nursing
• /
• v.26 no.1
• /
• pp.19-29
• /
• 2017

Purpose: The purpose of this study was to define and clarify the concept of reality shock in new graduated nurses. Methods: The hybrid model was used to develop the concept of reality shock. The model included a field study. The participants were 9 newly graduated nurses with a nursing career spanning less than a year. Results: The reality shock in newly graduated nurses was identified to have three dimensions and seven attributes. Specifically: 1) the dimension of performance included two attributes (conflict between theory and practice, and being overwhelmed by the workload), 2) the dimension of relationship included three attributes (loss of support, embarrassment from interference, and relational withdrawal), 3) the dimension of expectations included two attributes(value confusions and incongruity in personal life). Conclusion: Newly graduated nurses' reality shock was defined as a state of incongruence in their entire life that the new nurses experienced owing to value confusions that occurred due to the conflicts between theory and practice in an unfamiliar work environment, getting overwhelmed by the workload, and withdrawing establishing relationships with others due to the loss of support and excessive interference. These findings could help develop intervention strategies to decrease reality shock in newly graduated nurses.

• Journal of Family Resource Management and Policy Review
• /
• v.15 no.1
• /
• pp.93-116
• /
• 2011

This qualitative study focused on the dual earner families' work and family life to explore the possibility of ideal work-family balance. Seven employed married women and two men were interviewed about their work-family balance during two months in 2010. We described four representative cases of having difficulty in work and life balance. And we identified the three dimensions to make their work-family balance difficult. They are motherhood ideology, ideal worker, and the limit of men's housework participation. For ideal work-family balance, we suggested alternatives. First, the companies should make various work-life balance programs and allow their workers to use them actively. Second, the government should support the needs of work-life balance and carry out various family-friendly and child care polices. Third, husbands have to participate the housework much more and the model of 'good' parents need to be modified.

• Steel and Composite Structures
• /
• v.23 no.1
• /
• pp.67-85
• /
• 2017

This study investigates numerically the behavior of tilted angle shear connectors embedded in solid concrete slabs. Two different tilted angle connectors were used, titled angle with 112.5 and 135 degrees between the angle leg and steel beam flange. A nonlinear finite element model was developed to simulate and validate the experimental push-out tests. Parametric studies were performed to investigate the variations in concrete strength and connector's dimensions. The results indicate that the ultimate strength of a tilted angle shear connector is directly related to the square root of the concrete compressive strength. The effects of variations in the geometry of tilted angle connectors on the shear capacity are discussed in details. Based on the numerical analyses, two equations are proposed to estimate the ultimate capacity of tilted angle shear connectors of 112.5 and 135 degrees in the defined range of parameters.

• Knowledge Management Research
• /
• v.17 no.1
• /
• pp.49-72
• /
• 2016

Extant research on firm innovation productivity is limited in measuring the innovation productivity, in which they measured firm innovation productivity by using either inputs or outputs of innovation. The present study complemented the extant research by employing Data Envelopment Analysis (DEA) approach to measure firm innovation productivity. Furthermore, this paper examined the effects of firms' external knowledge search, as one of open innovation practices, on firm innovation productivity, for open innovation activities are regarded as an influencing factor on firm innovation productivity in the previous literatures. Using the data of the Korean Innovation Survey (KIS) of manufacturing industries conducted in 2008, this study developed hypotheses in which we considered not only two dimensions of external knowledge search (breadth and depth) but also two subtypes of external knowledge search (market-driven and science-driven). The results found that searching deeply and market-driven search are positively related to firm innovation productivity, but science-driven search is somewhat negatively related to firm innovation productivity. Furthermore, market-driven search can mitigate the negative effect of science-driven search on innovation productivity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.340-348
• /
• 1986

The design of two-dimensional zero-phase FIR digital filters by transformations is a popular and well-developed technique, but is suffers from the disadvantage that in its current form the filters with only four quadrant symmetry can not be designed exactly circular symmetry at frequencies far from the origin. it is shown how symmetry requirement for the filters with any number of dimensions can be fulfilled with arbbitrary percision by adapting transformation with the appropriate series expansions. this transformation has been known generally as the McClellan transformation. In this paper, a simple method for ensuring exelent circular symmetry at frequencies far from the origin is presented. This method which employs the Modified Mcclellan trnsformation for the design of 2-D FIR filter form 1-D FIR filters is quite useful for the design of 2-D FIR filters with multiple cutoff boundaries such as band-pass filters.