• The korean journal of orthodontics
• /
• v.39 no.6
• /
• pp.402-419
• /
• 2009

Successful treatment of the non-growing patient with an open bite of either dental skeletal pattern often presents a difficult challenge. The morphologic pattern in anterior open bite is characterized by longer vertical dimensions, an increase in development of the maxillary posterior dento-alveolar structure and a steep mandibular plane. In such cases, molar intrusion would be a good remedy for treatment. This article reports the successful treatment and retention of two anterior open-bite cases. We used orthodontic mini-implants for treatment and a circumferential retainer with posterior bite block or skeletal fixed retainer for retention. The diagnostic criteria and mechanics for appropriate treatment are discussed. Our results suggest that open bite can be reduced successfully with intrusion of molars using orthodontic mini-implants (OMI) without orthognathic surgery, and that circumferential retainer with posterior bite block and skeletal fixed retainer are effective for retention.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.487-497
• /
• 2005

Purpose: Resonance frequency analysis (RFA) , a non-invasive technique for the clinical measurement of implant stability, was investigated. Peri-implant bony defect may contribute to implant failure. This in vitro study evaluated the resonance frequencies according to various bony defects and determined whether the directional bone defect can affect the value of frequency analysis. Material and Method: Fifteen 3.75 mm in diameter and 10 mm in length, machined self-tapping implant future were used. Twelve types of bone defects that have different horizontal and vertical dimensions were simulated. Embedded implants were attached to the dental surveyor. Then, the transducer was connected with the implant fixture and the ISQ value was measured at four different directions. Two-way analysis of variance and post hoc $Sch\`{e}ffe'$ test were performed at the 95% significance level. Results: The control group showed the highest ISQ value and 5 thread-$360^{\circ}$ group had the lowest one. As the vertical exposure of implants in each angle was increased, the ISQ value was decreased. Although the horizontal exposure in each thread was increased, the ISQ value was not significantly decreased. Conclusion : Although the simulated defect type was different from each other, the ISQ value was similar among groups.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.241.1-241.1
• /
• 2014

The large-area high-power radio-frequency (RF) driven ion sources based on the negative hydrogen (deuterium) ion beam extraction are the major components of neutral beam injection (NBI) systems in future large-scale fusion devices such as an ITER and DEMO. Positive hydrogen (deuterium) RF ion sources were the major components of the second NBI system on ASDEX-U tokamak. A test large-area high-power RF ion source (LAHP-RaFIS) has been developed for steady-state operation at the Korea Atomic Energy Research Institute (KAERI) to extract the positive ions, which can be used for the NBI heating and current drive systems in the present fusion devices, and to extract the negative ions for negative ion-based plasma heating and for future fusion devices such as a Fusion Neutron Source and Korea-DEMO. The test RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of RF discharge. The characteristics and uniformities of the plasma parameter in the RF ion source were measured at the lowest area of the expansion bucket using two RF-compensated electrostatic probes along the direction of the short- and long-dimensions of the expansion region. The plasma parameters in the expansion region were characterized by the variation of loaded RF power (voltage) and filling gas pressure.

• Asian Oncology Nursing
• /
• v.12 no.1
• /
• pp.84-91
• /
• 2012

Purpose: The purpose of this study was to identify relationships between quality of sleep, symptom cluster, depression, environmental disorder, and quality of life among hospitalized cancer patients. Methods: The subjects were 114 patients who underwent chemotherapy for colon cancer, gastric cancer, gynecologic cancer and breast cancer. They were recruited from the cancer center of a university hospital. Data were collected from August 4th to 30th, 2011. The questionnaires included the Korean sleep scale A (quality of sleep), MDASI-K (symptom cluster), the environmental sleep disturbing scale, Zung's depression scale, and the Korean version of EORTC QLQ-C30. The collected data was analyzed by t-test, ANOVA, multiple regression analysis using the SPSS 19.0 program. Results: Functional QOL was negatively associated with symptom QOL (r=-.798, p<.001). Symptom cluster, depression, & spouse (46.3%) were the most powerful predictors for functional QOL (46.3%) and symptom QOL (53.4%). Conclusion: It is evident that oncology nurses need to evaluate two dimensions of quality of life for cancer patients, for example, functional and symptom QOL. We recommend nurses develop specific protocols for relieving physical symptoms and alleviating depression, and furthermore test the effectiveness of them.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.25-32
• /
• 2016

The two-dimensional (2D) analysis is widely used in geotechnical engineering for slope stability analysis assuming a plane-strain condition. It is implicitly assumed that the slip surface is infinitely wide, and thus three-dimensional (3D) end effects are negligible because of the infinite width of the slide mass. The majority of work on this subject suggests that the 2D factor of safety is conservative (i.e. lower than the 'true' 3D factor of safety). Recently, the 3D finite element method (FEM) became more attractive due to the progress of computational tools including the computer hardware and software. This paper presents the numerical analyses on rotational mode and translational mode slopes using the 2D and 3D FEM as well as 2D limit equilibrium methods (LEM). The results of the parametric study on the slope stability due to mesh size, dilatency angle, boundary conditions, stress history and model dimensions change are analysed. The analysis showed that the factor of safety in 3D analysis is always higher than that in the 2D analysis and the discrepancy of the slope width in W direction on the factor of safety is ignored if the roller type of W direction conditions is applied.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.9
• /
• pp.1515-1526
• /
• 2010

Consumer expectations for ethical businesses have become increasingly high in recent years; the fashion industry is working to implement greater corporate social responsibility (CSR). This study establishes the effects of the evaluation for participation in fashion brand CSR on perceived purchase values. In particular, the process for the evaluation for participation that affect the perceived purchase value through consumer-brand identifications (personal/social) was verified and how the consumer regulatory focuses would influence this process was identified. For this study, an on-line survey was conducted that included a series of filtering questions that measured the level of social concern of respondents. Valid data from 505 female consumers were analyzed for the structure equation modeling. The empirical results suggested that the evaluation for participation in fashion brand CSR positively affected the two dimensions of consumer-brand identification; personal identification and social identification. In addition, consumer-brand identification played a role as a mediating variable in the path to influence the perceived purchase values of CSR brands. Lastly, there were differences in reactions to CSR activities by consumer groups with different regulatory focuses. The effect of the evaluation for participation in fashion brand CSR was shown to be higher for consumers with promotion focuses than on consumers with prevention focuses. The results of this study will help fashion companies understand the importance of the consumer participation in CSR by having consumers participate in ethical consumption.

• Archives of Plastic Surgery
• /
• v.42 no.3
• /
• pp.288-294
• /
• 2015

Background Surgical ablation for locally advanced breast cancer results in large chest wall defects, which can then be managed with local flaps or skin grafts. The purpose of this article is to evaluate the outcomes of three types of local skin flaps. Methods Among 25 local flaps in 24 patients, 6 were bilateral advancement (BA) flaps, 9 were thoracoabdominal (TA) flaps, and 10 were thoracoepigastric (TE) flaps. Clinical outcomes were compared including complications, the need for a secondary surgical intervention, and the timing of adjuvant therapy. Results The mean defect size was $436.2cm^2$. Two patients with TA flaps and 6 patients with TE flaps developed distal flap necrosis, and skin grafts were needed to treat 2 patients with TE flaps. Radiation was administered to the BA, TA, and TE patients after average postoperative durations of 28, 30, or 41 days, respectively. The incidence of flap necrosis tended to be higher in TE patients, which lead to significant delays in adjuvant radiation therapy (P=0.02). Conclusions Three types of local skin flaps can be used to treat large chest wall defects after the excision of locally advanced breast cancer. Each flap has its own merits and demerits, and selecting flaps should be based on strict indications based on the dimensions and locations of the defects.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.2
• /
• pp.17-23
• /
• 1999

Top-to-bottom compression strength of corrugated fiberboard boxes is partly dependent on the load-carrying ability of the central panel areas. The ability of these central areas to resist bending under load will increase the stacking strength of the box. The difference of box compression strengths, among boxes which are made with identical dimensions and fabricated with same components but different flute sizes, is primarily due to difference of the flexural stiffness of the box panels. Top-to-bottom compression strength of a box is accurately predicted by flexural stiffness measurements and the edge crush test of the combined boards. This study was rallied out to analyze the flexural stiffness, maximum bending force and maximum deflection for various corrugated fiber-boards by experimental investigation. There were significant differences between the machine direction (MD) and the cross-machine direction (CD) of corrugated fiberboards tested. It was about 50% in SW and DW, and $62%{\sim}74%$ in dual-medium corrugated fiberboards(e.g. DM, DMA and DMB), respectively. There were no significant differences of maximum deflection in machine direction among the tested fiberboards but, in cross direction, DM showed the highest value and followed by SW, DMA, DMB and DW in order. For the corrugated fiberboards tested, flexural stiffness in machine direction is about $29%{\sim}48%$ larger than cross direction, and difference of flexural stiffness between the two direction is the lowest in DMA and DMB.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.581-587
• /
• 2011

The production of high-precision micro-sized screws, used to fasten parts of micro devices, generally utilizes a cold thread-rolling process and two flat dies to create the teeth. The process is fairly complex, involving parameters such as die shape, die alignment, and other process variables. Thus, up-front finite-element(FE) simulation is often used in the system design procedure. The final goal of this paper is to produce high-precision screw with a diameter of $800{\mu}m$ and a thread pitch of $200{\mu}m$ (M0.8${\times}$P0.2) by a cold thread rolling process. Part I is a first-stage effort, in which FE simulation is used to establish process parameters for thread rolling to produce micro-sized screws with M1.4${\times}$P0.3, which is larger than the ultimate target screw. The material hardening model was first determined through mechanical testing. Numerical simulations were then performed to find the effects of such process parameters as friction between work piece and dies, alignment between dies and material. The final shape and dimensions predicted by simulation were compared with experimental observation.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.30-44
• /
• 2017

The purposes of this study were to (a) identify dimensions of relational benefits in the social commerce market, (b) predict the effects of relational benefits on satisfaction, repurchase intention, and word of mouth (WOM) intention, (c) examine the mediating effects of satisfaction, and (d) compare the differences in the effects of relational benefits on satisfaction, repurchase intention, and WOM intention between the two groups of market mavenism. For collecting data, a self-administered questionnaire was undertaken by an online research agency. A total of 490 usable responses were obtained from consumers who have used social commerce sites. The sample included a slightly higher number of females (50.8%) than males and age was ranged from 20 years to 40 years. An exploratory factor analysis generated four factors of relational benefits such as confidence, convenience, special treatment, and information. Multiple regression models showed that confidence, convenience, and special treatment benefits were significant predictors of satisfaction and repurchase intention; the confidence and convenience benefits were significant for WOM intention. Satisfaction significantly mediated the relationship between relational benefits and repurchase intention, and the relationship between relational benefits and WOM intention. The group with high level of market mavenism more highly perceived the relational benefits than the other groups. Confidence benefit had a significant effect on repurchase intention regardless of the level of market mavenism, while convenience benefit had a significant effect on repurchase intention in the non-market maven group. This study discussed the managerial implications for customer relationship management in the social commerce marketplace.