• Journal of Astronomy and Space Sciences
• /
• v.36 no.4
• /
• pp.265-281
• /
• 2019

We present new BVRI light curves of UY UMa with no O'Connell effect and a flat bottom secondary eclipse. Light curve synthesis with the Wilson-Devinney code gives a new solution, which is quite different from the previous study: UY UMa is an A-subtype over-contact binary with a small mass ratio of q = 0.21, a high inclination of 81°.4, a small temperature difference of ΔT=18°, a large fill-out factor of f = 0.61, and a third light of approximately 10% of the total systemic light. The absolute dimensions were newly determined. Seventeen new times of minimum light have been calculated from our observations. The period study indicates that the orbital period has intricately varied in a secular period increase in which two cyclical terms with periods of 12^y.0 and 46^y.3 are superposed. The secular period increase was interpreted to be due to a conservative mass transfer of 2.68 × 10^-8 M_⊙/yr from the less massive to the more massive star. The cyclical components are discussed in terms of double-light time contributions from two additional bound stars. The statistical relations of Yang & Qian (2015) among the physical parameters of 45 deep, low mass ratio contact binaries were revisited by using the physical parameters of UY UMa and 25 Kepler contact binaries provided by Şenavci et al. (2016).

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.350-355
• /
• 2017

UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.1
• /
• pp.43-49
• /
• 2018

PURPOSE. The purpose of this in vitro study is to examine the effects of a nano-structured alumina coating on the adhesion between resin cements and zirconia ceramics using a four-point bending test. MATERIALS AND METHODS. 100 pairs of zirconium bar specimens were prepared with dimensions of $25mm{\times}2mm{\times}5mm$ and cementation surfaces of $5mm{\times}2mm$. The samples were divided into 5 groups of 20 pairs each. The groups are as follows: Group I (C) - Control with no surface modification, Group II (APA) - airborne-particle-abrasion with $110{\mu}m$ high-purity aluminum oxide ($Al_2O_3$) particles, Group III (ROC) - airborne-particle-abrasion with $110{\mu}m$ silica modified aluminum oxide ($Al_2O_3+SiO_2$) particles, Group IV (TCS) - tribochemical silica coated with $Al_2O_3$ particles, and Group V (AlC) - nano alumina coating. The surface modifications were assessed on two samples selected from each group by atomic force microscopy and scanning electron microscopy. The samples were cemented with two different self-adhesive resin cements. The bending bond strength was evaluated by mechanical testing. RESULTS. According to the ANOVA results, surface treatments, different cement types, and their interactions were statistically significant (P<.05). The highest flexural bond strengths were obtained in nano-structured alumina coated zirconia surfaces (50.4 MPa) and the lowest values were obtained in the control group (12.00 MPa), both of which were cemented using a self-adhesive resin cement. CONCLUSION. The surface modifications tested in the current study affected the surface roughness and flexural bond strength of zirconia. The nano alumina coating method significantly increased the flexural bond strength of zirconia ceramics.

• Smart Structures and Systems
• /
• v.20 no.4
• /
• pp.427-440
• /
• 2017

One of the suitable structural damage detection methods using vibrational characteristics are damage-index-based methods. In this study, a damage index for identifying damages in plate structures using frequency response function (FRF) data has been provided. One of the significant challenges of identifying the damages in plate structures is high number of degrees of freedom resulting in decreased damage identifying accuracy. On the other hand, FRF data are of high volume and this dramatically decreases the computing speed and increases the memory necessary to store the data, which makes the use of this method difficult. In this study, FRF data are compressed using two-dimensional principal component analysis (2D-PCA), and then converted into damage index vectors. The damage indices, each of which represents a specific condition of intact or damaged structures are stored in a database. After computing damage index of structure with unknown damage and using algorithm of lookup tables, the structural damage including the severity and location of the damage will be identified. In this study, damage detection accuracy using the proposed damage index in square-shaped structural plates with dimensions of 3, 7 and 10 meters and with boundary conditions of four simply supported edges (4S), three clamped edges (3C), and four clamped edges (4C) under various single and multiple-element damage scenarios have been studied. Furthermore, in order to model uncertainties of measurement, insensitivity of this method to noises in the data measured by applying values of 5, 10, 15 and 20 percent of normal Gaussian noise to FRF values is discussed.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2015

Fashion and architecture essentially have structure to build space for a form of three dimensions. This study defines the form in which structure in itself becomes design as structural simplicity and investigates design paying attention to only structure. It is one of efforts in order to display new design required in the age of a flood of design and it is considered that before developing design through the fusion of architecture and fashion, understanding structure which is the most fundamental element to constitute the form of the two genres will be a groundwork to develop proper fusion design. This study elucidates similarities between architecture and fashion through literature review and investigates structure meant in architecture and fashion, and after that, collects corresponding examples through related literature and fashion information site. For structural simplicity in architecture, structure of a building in itself is a form and decoration at the same time, and it appears as a form of minimizing other elements and stressing the structure only. Structure in fashion means composition line which essentially exists to embody two dimensional materials onto three dimensional human body. As elements of geometric lines are creatively expressed by a designer in order to constitute three dimensional form from structural simplicity, they connote a variety of functions and exert decorative effects as well. And the shape of structure expressed like this is employed as a tool to show off the designer's techniques.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2017

Objective: Two control rooms of a petroleum complex were ergonomically evaluated for this study using diverse drawings of the rooms. The objective of the study is to show the evaluation process and its results, assessment method and essential elements for drawing-based ergonomic evaluation. Background: Ergonomics can enhance the working environment and safety for a control room when implemented effectively. A control room design was examined by ergonomists based on ergonomic principles and well-practiced standards. This study was conducted because a construction consortium wanted to perform an ergonomic evaluation of the control rooms before the construction. Method: A simple evaluation process, composed with a pre-evaluation, an evaluation and a post-evaluation, was employed to carry out the study. ISO 11064, NUREG-0700, NUREG/CR-6150, and CRIOP were reviewed to evaluate the control rooms. The assessment ranges over the control room layout, workstations, display and control, environmental requirements and safety. Three ergonomists participated in the study and performed the evaluation for two months. Results: An experienced consortium of construction companies designed the petroleum complex and control rooms. No significant ergonomic design problems were detected. Quantitative recommendations were provided for the layout and workstation dimensions. Specific design directions were also proposed for environmental requirements and safety. Conclusion and Application: Design advice and minor potential problems were reported as results of the drawing-based ergonomic evaluation. More practical suggestions could be additionally provided if an on-site assessment was conducted. However, the ergonomic evaluation used in this study could be helpful and applied to designing and evaluating other various control rooms prior to their construction.

• Korean Journal of Materials Research
• /
• v.24 no.11
• /
• pp.585-590
• /
• 2014

Microstructural evolution in the thickness direction of an oxygen free copper processed by accumulative rollbonding (ARB) is investigated by electron back scatter diffraction (EBSD) measurement. For the ARB, two copper alloy sheets 1 mm thick, 30 mm wide and 300 mm long are first degreased and wire-brushed for sound bonding. The sheets are then stacked and roll-bonded by about 50% reduction rolling without lubrication at an ambient temperature. The bonded sheet is then cut to the two pieces of the same dimensions and the same procedure was repeated on the sheets up to eight cycles. The specimen after 1 cycle showed inhomogeneous microstructure in the thickness direction so that the grains near the surface were finer than those near the center. This inhomogeneity decreased with an increasing number of ARB cycles, and the grain sizes of the specimens after 3 cycles were almost identical. In addition, the aspect ratio of the grains decreased with an increasing number of ARB cycles due to the subdivision of the grains by shear deformation. The fraction of grains with high angle grain boundaries also increased with continuing process of the ARB so that it was higher than that of the low angle grain boundaries in specimens after 3 cycles. A discontinuous dynamic recrystallization occurred partially in specimens after 5 cycles.

• Structural Engineering and Mechanics
• /
• v.67 no.5
• /
• pp.493-504
• /
• 2018

In this paper, the tensile failure behaviour of transversally bedding layers was numerically simulated by using particle flow code in two dimensions. Firstly, numerical model was calibrated by uniaxial, Brazilian and triaxial experimental results to ensure the conformity of the simulated numerical model's response. Secondly, 21 circular models with diameter of 54 mm were built. Each model contains two transversely bedding layers. The first bedding layer has low mechanical properties, less than mechanical properties of intact material, and second bedding layer has high mechanical properties, more than mechanical properties of intact material. The angle of first bedding layer, with weak mechanical properties, related to loading direction was $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$ while the angle of second layer, with high mechanical properties, related to loading direction was $90^{\circ}$, $105^{\circ}$, $120^{\circ}$, $135^{\circ}$, $150^{\circ}$, $160^{\circ}$ and $180^{\circ}$. Is to be note that the angle between bedding layer was $90^{\circ}$ in all bedding configurations. Also, three different pairs of the thickness was chosen in models; i.e., 5 mm/10 mm, 10 mm/10 mm and 20 mm/10 mm. The result shows that In all configurations, shear cracks develop between the weaker bedding layers. Shear cracks angel related to normal load change from $0^{\circ}$ to $90^{\circ}$ with increment of $15^{\circ}$. Numbers of shear cracks are constant by increasing the bedding thickness. It's to be note that in some configuration, tensile cracks develop through the intact area of material model. There is not any failure in direction of bedding plane interface with higher strength.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.11-16
• /
• 2020

As a plan for oil spill accidents, research to collect and analyze optimal equipment assignments is essential. However, studies that have diversified and analyzed the optimal equipment assignments for responding to oil spill accidents have not been preceded. In response to the need for analyzing optimal equipment assignments study, we devised a genetic algorithm for optimal equipment assignments. The designed genetic algorithm yielded 10,000 optimal equipment assignments. We clustered using the k-means algorithm. As a result, the two clusters of Yeosu, Daesan, and Ulsan, which are expected to be the largest spills, were clearly identified. We also projected 16-dimensional data in two dimensions via Sammon's mapping. The projected data were analyzed for distribution. We confirmed that results of the simulation were better than those of optimal equipment assignments included in the cluster.In the future, it will be possible to implement an approximate model with excellent performance based on this study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.1
• /
• pp.1-11
• /
• 1998

The purpose of this paper is twofold : to identify loyalty applicable to segmentation of theme park users and to find characteristics of the segments. Thetheme park was regarded as a product and Lotte World was regarded as a brand. One hundred thirty five college students were selected by nonprobability sampling for two waves thirty of data collection. Both behavioral and attitudinal dimension of loyalty were measured in the first wave by the proportion of visit of the Lotte World to 3 major theme parks for one year, including the Lotte World, and by calculating the mean score of selected 7 attitudinal items, respectively. After 14 weeks, the same respondents were asked the number of actual visits of the Lotte World. Medians of two dimensions and cluster analyses were utilized to classify the respondents into 4 categories : high, spurious, latent, and low loyalty. Then ANOVA and $$\chi$^2$ test of independence were conducted to find the difference in intention to visit the Lotte World and actual visitation of it among groups. Only intention was significantly different by the group and the mean score of intention was highest in the high loyalty group. Although no statistical difference was found in actual visitation among groups, the theory of planned behavior provided a theoretical support to conclude that the loyalty is a useful variable for segmentation of theme park users because intention is an antecedent variable to the behavior. Discriminant analyses showed that characteristics of each loyalty group can be differentiated by motivations and constraints. When median was a group classification criterion, 73.2 percent of high loyalty group was correctly classified. A few comments were suggested on data collection, and inclusion of new discriminant variables was discussed for the future research.