• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.65-71
• /
• 2009

This paper presents the energy harvesting technique which is carried out by vibration system with a piezoelectric element. In this study, low frequency characteristics of the piezoelectric element bonded to the aluminum cantilever were experimentally investigated. The piezoelectric element of size of $45L{\times}11W{\times}0.6H$ and piezoelectric constant($d_{31}$ ) of $-180{\times}10^{-12}C/N$ was used. The material of cantilever is an aluminum and two kinds of cantilever of which dimensions are (150, 190)$[mm]{\times}13[mm]{\times}1.5[mm]$ were experimented, respectively. The cantilever was fixed on the magnetic type vibrator and the vibrator was operated by power input with a sine wave. The characteristics of requency and mass variation of cantilever end part such as 0, 2.22, 4.34, 5.87, 8.66, 11.01 [g] were investigated. Finally, this paper suggests a method of generating electrical energy with a piezoelectric element using wind, an energy source that is easily applied and from which we can obtain "clean" energy.

• Journal of Korean Society for Quality Management
• /
• v.44 no.4
• /
• pp.855-867
• /
• 2016

Purpose: Evaluation of the creativity level of design concepts. Methods: 14 winners of design concepts area of the 2015 Red dot Award are used to evaluate the creativity level of design concepts. Among the 14 winners, one is the highest award (; luminary) winner, 4 are the second highest award(; best of the best) winners, and the remaining 9 are winners. AHP model was developed to evaluate the creativity levels of design concepts, and applied to the 14 winners of the reddot award. Results: Originality and practicality have been used to evaluate creativity level of new product ideas in the previous study. In this study, it is identified that originality is composed of innovativeness and topicality, and practicality is composed of utility and realizability. The design concepts which won higher level awards have higher level of originality. Among the two dimensions of originality, topicality has more significant relationship than innovativeness. Conclusion: The design concepts with higher level of originality, especially higher level of topicality, have a fair chance to be recognized as creative. It is notable that higher level of originality does not guarantee higher profit. According to the previous studies on the commercial success of new products, practicality is more important than originality.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.106-113
• /
• 2020

This study identified the differences in the morphometric characteristics of the truss and classical dimensions between diploid and triploid Far Eastern catfish, Silurus asotus, and provided methods for sorting diploid and triploid Far Eastern catfish based on morphometric observations. The significant variables were the direct distance between the anterior edge of the lower lip and the anterior insertion of the dorsal fin(DALAD), the horizontal distance between the anterior edge of the lower lip and the anterior insertion of the ventral fin (HALAV), the direct distance between the anterior edge of the upper lip and the first nostril(DAUF), the direct distance between the anterior edge of the upper lip and the second nostril(DAUS), the interorbital width(IW), and the mandible barbel length (ManBL). The more significant variables were HALAV, DALAD, DAUF, IW, and DAUS. The most useful combination of variables for separating the two groups was DALAD, IW, and DAUF, which correctly classified 85% of the catfish as triploid or diploid, and that percentage was the maximum degree of value possible (p<0.05). Triploid Far Eastern catfish had a high rate of growth in the head region and body depth during the first year after hatching. Triploid Far Eastern catfish had smaller heads and shorter mandible barbels than diploid Far Eastern catfish.

• Progress in Superconductivity
• /
• v.1 no.1
• /
• pp.20-25
• /
• 1999

We constructed a high-$T_c$ scanning SQUID microscope (SSM) operating in the liquid nitrogen. We used a washer-type YBCO SQUID with inner and outer dimensions of $12{\mu}m$ and $36{\mu}m$, respectively, which was grown on the $SrTiO^3$ bicrystal substrate. The sample, rather than SQUID, was scanned using two stepping motors. We also developed readout electronics, stepping motor controller, and the software for system control and data display. We took images of various samples using our SSM and found that the spatial resolution is about $40{\mu}m$ and noise level is lower than $10^{-7}T/{\surd}Hz$ at 100 Hz and higher at lower frequencies. The noise level was much higher than that of a typical SQUID due to the other coupling from the electric parts. We present a simple argument on the inductive coupling between the sample and the SQUID which should be under-stood for the proper interpretation of the obtained images. By comparing the measured data with the simulation results the gap between the SQUID and the sample is estimated to be $40{\mu}m$.

• Journal of Veterinary Clinics
• /
• v.29 no.1
• /
• pp.43-48
• /
• 2012

This survey on professionalism and job satisfaction was aimed to analyze the veterinarians' attitude toward their profession and educational needs in Korea. Two hundred and ninety nine completed questionnaires were analyzed for this study. The participants considered nontechnical competences, such as communication skills and ethical decision making skills, important as medical knowledge and skills for veterinarians. There were significant differences in veterinarians' job satisfaction among the subgroups of gender, region, specialty, employment status, and work hours. The factor analysis of adjusted Hall's professionalism scale showed 4 dimensions of Veterinarians' professionalism; belief in self-regulation, belief in public service, using the professional organization as a major referent, and autonomy. Veterinarians' professionalism was significantly related to the job satisfaction. The survey results suggest that the educational program of professionalism should be needed for the professional development of veterinary students and veterinarians.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.169-176
• /
• 2008

This paper presents optimal design of controllable magnetorheological(MR) shock absorbers for passenger vehicle. In order to achieve this goal, two MR shock absorbers (one for front suspension; one for rear suspension) are designed using an optimization methodology based on design specifications for a commercial passenger vehicle. The optimization problem is to find optimal geometric dimensions of the magnetic circuits for the front and rear MR shock absorbers in order to improve the performance such as damping force as an objective function. The first order optimization method using commercial finite element method(FEM) software is adopted for the constrained optimization algorithm. After manufacturing the MR shock absorbers with optimally obtained design parameters, their field-dependent damping forces are experimentally evaluated and compared with those of conventional shock absorbers. In addition, vibration control performances of the full-vehicle installed with the proposed MR shock absorbers are evaluated under bump road condition and obstacle avoidance test.

• Korean Journal of Veterinary Research
• /
• v.56 no.4
• /
• pp.209-213
• /
• 2016

This study evaluated several known echocardiographic markers related to the assessment of severity in dogs with patent ductus arteriosus (PDA) after the closure of ductus arteriosus (DA). Forty-two dogs with patent ductus arteriosus were enrolled in this study. Evaluated echocardiographic markers were left atrial to aortic root ratio, left ventricular end-diastolic dimension to aortic root ratio, indexed left ventricular end-diastolic and end-systolic dimensions, end-diastolic and end systolic volume index, pulmonic flow to systemic flow (Qp/Qs) ratio, velocities of pulmonary regurgitant and systolic jets, pulmonary flow profiles and the presence of mitral regurgitation. Those markers were evaluated before, 1 day, and 30 days after the closure of DA. Statistically significant changes in some echocardiographic markers (i.e., Qp/Qs) were observed. Although several studies in human and dogs have evaluated the clinical outcome of PDA occlusion using several echocardiographic markers, this study has firstly evaluated all echocardiographic markers known to be useful for assessing the clinical outcome of PDA occlusion in human, and has demonstrated that those markers including the Qp/Qs and pulmonary flow profiles were useful in evaluating of clinical outcome of PDA in dogs and the reduction of LA and LV preload after ductal closure could dramatically reduce after successful ductal occlusion of PDA in dogs.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1995.03a
• /
• pp.158-165
• /
• 1995

A new fungible materal named Epoxy-Granite composite is applied to the column structure of drilling center in order to investigate the advanced dynamic chatateristics comparing with a conventional cast iron material. The dimensions of new colum structure are adjusted to keep the same stiffness (El value) and the manufacturing conditions are formulated based on the preceeding research experience about the development of Epoxy-Granite structural material. The two kinds of experiments are set up. one of which is for the measurement of natural mode and frequency using experimental modal analysis and the other one is for the measurement of vibration amplitude during idling operation of a machine fool. The comparison of maximum, accelerance values at each natural frequency of bending mode shows a Epoxy-Granite column have larger modal damping ratios(over 2times) than a cast iron column. The vibration amplitude of Epoxy-Granite column measued on the bed motor base and top of column are also much smaller (up to 12%) than the case of cast iron column. It is therefore confirmed that a Epoxy-Granite materal exhibits a good anti-vibrational property even if it is used under the actual operational environments of machine eool as a practical structural element.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.5
• /
• pp.393-399
• /
• 2016

In this study, an experiment was conducted using a 3D scanner, commonly used in reverse engineering techniques, and the newly introduced CT measuring machine. The hole, width, and angle of specimens having various shapes were designated, the error rates in dimensional modelling generated during scanning with each device were compared, and the models were printed using a 3D printer. A secondary comparative analysis of the two printed specimens was conducted; the causes of dimension errors that occur during the printing process after scanning with each device and the differences associated with variation in shape were also analyzed. Based on the analysis results, the featured shape for each scanning application method and issues to consider in reverse engineering were presented, and the use of the CT measuring machine was recommended as a method to minimize error rates in dimensions and ensure efficient reverse engineering.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1330-1341
• /
• 1993

The kinematic synthesis deals with the systematic design of mechanisms for a given performance. The area of synthesis may be grouped into two categories to determine the type and to size the dimensions of a mechanism for a specified task. In this paper, using a database of mechanisms a designer can determine the type of mechanism conveniently and design equations are automatically generated for a given input performance. The solving method of design equations utilizes an optimization routine to obtain roots effectively. The linkages of 4, 6, and 8bars with revolute joints are considered in this study but may be extended to linkages of more bars.