• Journal of computational fluids engineering
• /
• v.13 no.4
• /
• pp.13-23
• /
• 2008

This paper is an extension of previous study[1] on a development of a divergence-free element method using a hermite interpolated stream function. Divergence-free velocity bases defined on rectangles derived herein produce pointwise divergence-free flow fields. Hence the explicit imposition of continuity constraint is not necessary and the Galerkin finite element formulation for velocities does not involve the pressure. The divergence-free element of the previous study employed hermite (serendipity) cubic for interpolation of stream function, and it has been noted a possible discontinuity in variables along element interfaces. This deficiency can be removed by use of a hermite bicubic interpolated stream function, which requires four degrees-of-freedom at each element corners. Those degrees-of-freedom are the unknown variable, its x- and y-derivatives and its cross derivative. Detailed derivations are presented for both solenoidal and irrotational basis functions from the hermite bicubic interpolated stream function. Numerical tests are performed on the lid-driven cavity flow, and results are compared with those from hermite serendipity cubics and a stabilized finite element method by Illinca et al[2].

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.124-129
• /
• 2008

In this study, fuel qualities including kinematic viscosity and pour point in the various temperature, calorific value and combustion characteristics of two biodiesels based on the soybean and waste oil blended with light oil were investigated and discussed in order to figure out to confirm fuel compatibility taking the place of light oil in the hot air heater or boiler. As biodiesel content ratio increased calorific value of biodiesel decreased, and the difference was 13% between 100%-biodiesel and light oil. In general, pour points of the biodiesels were higher than light oil, and as biodiesel content ratio increased pour point increased. About 15 cSt was the pour point of biodiesels and light oil, which occurred at 3 to $4^{\circ}C$ in the biodiesels and $-25^{\circ}C$ in the light oil. Flame dimensions of biodiesels and light oil were almost same at the same combustion condition in the burner of the hot air heater. CO concentrations in the exhaustion gas were far lower than those of the light oil. Though pour point of biodiesel is a little inferior to light oil, still biodiesel can be an alternative fuel substituting for light oil in combustion system without much modifying the current oil combustion mechanism.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.4
• /
• pp.71-77
• /
• 2004

Drying Shrinkage has much complexity as it has relations with both internal elements of concrete and external factors. Therefore, experiments on Concrete Drying Shrinkage are carried out in this study under simplified circumstances applying temperature & Humidity test chamber which enables constant temperature and humidity. Comparative analyses have been made respectively according to the consequences aiming at modelling for prediction of Concrete Drying Shrinkage and making out measures to reduce it. Strain Rate of Drying Shrinkage of concrete under the condition of dry air appears to rise by about 20%-30% in proportion as the temperature rises $5^{\circ}C$ when the humidity was held below 10% compared under the condition of dry temperature & Humidity test chamber. Strain Rate of Drying Shrinkage in pit sand concrete increased 20% higher than measured when in river sand under the condition of 90-day material age. A general formula with two variables is derived as follow ${\varepsilon}={\alpha}_1＋{\beta}_1x_1＋{\beta}_2x_2＋{\beta}_3x_1^2＋{\beta}_5x_2^2$. and also graphed in 3 dimensions, enabling to apply to actual design and predict Strain Rate of Drying Shrinkage in concrete. The results of prediction of Rate of Drying Shrinkage by Response Surface Analysis are as follows. The coefficient of correlation of Drying Shrinkage in Concrete was over 90%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1016-1026
• /
• 1996

The purpose of this study was to extract protypes from features and concrete images of Lotus and Crane patterns. A qualitative and a quantitative methods were used. Qualitative informations were obtained from depth Interviews for pattern selection and feature extraction, and quantitative informations from a quail-experiment for pattern caregorization. The subjects were 20 female design students and non-design, students in Teajon. The results were summerized into a similarity metrix which was interpreted by the cluster analysis and the multi-dimensional scling(MDS). The patterns for the study were grouped into 8 clusters. Four dimensions were chosen for the MDS. The location of each pattern was visualized in a 2-dimesional spaces and the location of each cluster in a 3-dimensional spaces. The first dimension, "Lotus" vs "Crane" refired to pattern types, and the second dimension, "realistic" vs "transformable", the transformability. The third dimension, "simple" vs "complex", refired to the degree of simplification, and the forth dimension, "continuous" vs "discontinuous", continuity. The results of the Quantitative analysis could be summerized into 3-level prototype hiararchy In the first level, the patterns were devided clearly into two groups. Lotus and Crane by pattern types. In the second levelk, each group was devided into twosubgroups by continuity. In the third, each subgroup was divided into four subgroups by transformability and the degree of simplification. Four protypes, the final targets of the present study, were extracted from the third level. The are Stylized, Realistic, Decorative, Abstract types.d from the third level. The are Stylized, Realistic, Decorative, Abstract types.

• Journal of Korean Dental Science
• /
• v.2 no.2
• /
• pp.18-23
• /
• 2009

Introduction : The purposes of this study were to analyze the differences between the anterior and posterior overjets using bracket slot points, and compare two methods of overjet calculation according to different reference points using clinical bracket points on three-dimensional digital models. Methods : A total of 35 normal occlusion models were scanned using a three-dimensional scanner (Orapix$^{(R)}$, Orapix Co., Ltd, Seoul, Korea) and then, virtual brackets (0.022" Slot MBT preadjusted brackets, 3 M Co.CA. USA) were placed on the digital models using virtual setup program (3Txer$^{(R)}$ ver. 1.9.6, Orapix co., Ltd). Archwire-like curves were designed to analyze labial and buccal overjet. Results : There were no statistically significance differences between the right and left overjet and between genders. The average overjet was found to be $1.67{\pm}0.85mm$ at the central incisor area, $2.16{\pm}0.88mm$ at the second premolar and $1.53{\pm}0.71mm$ at the first molar. Conclusion : It is recommended that overjet of individualized upper and lower arch to be 2.0mm at the anterior and posterior teeth.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.49.2-49.2
• /
• 2015

IntraCluster Medium (ICM) located at the galaxy cluster is in the state of very hot, tenuous, magnetized, and highly ionized X-ray emitting plasmas. High temperature and low density make ICM very viscous and conductive. In addition to the high conductivity, fluctuating random plasma motions in ICM, occurring at all evolution stages, generate and amplify the magnetic fields in such viscous ionized gas. The amplified magnetic fields in reverse drive and constrain the plasma motions beyond the viscous scale through the magnetic tension. Moreover, without the influence of resistivity viscous damping effect gets balanced only with the magnetic tension in the extended viscous scale leading to peculiar ICM energy spectra. This overall collisionless magnetohydrodynamic (MHD) turbulence in ICM was simulated using a hyper diffusivity method. The results show the plasma motions and frozen magnetic fields have power law of $E_V^k{\sim}k^{-3}$, $E_M^k{\sim}k^{-1}$. To explain these abnormal power spectra we set up two simultaneous differential equations for the kinetic and magnetic energy using an Eddy Damped Quasi Normal Markovianized (EDQNM) approximation. The solutions and dimensions of leading terms in the coupled equations derive the power spectra and tell us how the spectra are formed. We also derived the same results with a more intuitive balance relation and stationary energy transport rate.

• Journal of computational fluids engineering
• /
• v.20 no.2
• /
• pp.103-108
• /
• 2015

Fluid-body interaction analysis of floating body with six degree-of-freedom motion is presented. In this study, three-dimensional incompressible Navier-Stokes equations are employed as a governing equation. The numerical method is based on a finite-volume approach on a cartesian grid together with a fractional-step method. To represent the body motion, the immersed boundary method for direct forcing is employed. In order to simulate the coupled six degree-of-freedom motion, Euler's equations based on rigid body dynamics are utilized. To represent the complex body shape, level-set based algorithm is utilized. In order to describe the free surface motion, the volume of fluid method utilizing the tangent of hyperbola for interface capturing scheme is employed. This study showed three different continuums(air, water and body) are simultaneously simulated by newly developed code. To demonstrate the applicability of the current approach, two different problems(dam-breaking with stationary obstacle and water entry) are simulated and all results are validated.

• The Journal of Information Systems
• /
• v.22 no.1
• /
• pp.117-143
• /
• 2013

Social media have been rapidly and widely adopted in various areas, and tourism industry can be one of potential growing areas. Tourist and travelers would like to share their photos and stories as well as find others' experiences. People are doing their activities through social media. Regarding relaxing entertainments, information sharing, escapism, social interaction, tourism activities are being paid attention by majority of users in social media. However, Although people have various motivation for using social media, academically researchers have not actively studied on the phenomenon arising from tourism industry. Therefore, this study aims to the reasons for tourism information searching motivational factors of social media that influence perceived value and its consequences such like before-searching, during-searching, and after-searching and divided social media into two types according to the level of social presence, and then empirically verified them. Antecedent variables divided into benefits including perceived usefulness and information quality and sacrifices including complexity and perceived effort. Our analysis results show that both of dimensions had the greatest effect on perceived value of social media use, which affect the consequences.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.5
• /
• pp.774-781
• /
• 2013

A structural analysis was carried out for a 60 N.m class flexible disk coupling. Flexible disk couplings are used to transmit power between two shafts. When a flexible coupling is used, some amount of misalignments such as angle of deviation and end play can be allowed in assembling the shafts. However, the maximum allowable misalignment should be decided to guarantee the fatigue life. In this study, the effect of the angle of deviation and end play on the maximum stress was investigated. From the analysis results, it was shown that the angle of deviation has a greater effect on the maximum stress than the end play. Furthermore, the dimensions of the disk plate were optimized to realize a better design. From the optimization, the maximum stress could be reduced by up to 5.2%.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.3
• /
• pp.19-31
• /
• 2013

The purpose of this study was to investigate the influence of consumer-internet brand relationship on consumer's satisfaction and loyalty. In order to establish structural equation model, previous studies about consumer-brand relationship, consumer's satisfaction and loyalty were investigated. The survey was limited to the respondents over 20 years old living in Seoul and other metropolitan areas who had purchased fashion products in internet shopping mall. Questionnaires were collected from February 1, 2012 to February 12, 2012 and 562 useful data were analyzed by descriptive statistics, exploratory factor analysis, confirmatory factor analysis, reliability analysis, and Pearson's correlation analysis, using Amos 19. The results of verifying the hypotheses were as follows: First, consumer-internet brand relationship was classified into two dimensions including 'emotional affection' and 'cognitive trust'. Second, both 'emotional affection' and 'cognitive trust' had a positive effect on consumer's satisfaction. Third, 'emotional affection' had a positive effect on consumer's loyalty, but 'cognitive trust' did not affect consumer's loyalty directly. Finally consumer's satisfaction had a significant effect on consumer's loyalty. It was suggested that consumer-internet brand relationship could be an important factor to form brand equity. Therefore, internet shopping mall marketer should establish a strategy that can help customers make a strong relationship with their internet shopping mall.