• 한국가구학회지
• /
• 제18권2호
• /
• pp.143-146
• /
• 2007

This study was carried out to assess the dimensional stability of wood material treated by plastic processing for bentwood and compression wood. The evaluation method was different between two wood materials, but the treatments for them were very similar to each other. One of the main methods is heat treatment with sufficient water vapor. In bentwood, the used species were painted maple (Acer mono), bitter wood (Picrasma quassioides) and birch (Betula schmidtii). Steaming was the worst treatment method for dimensional stabilization of bentwood. The best results could be attained with PEG treatment for dimensional stabilization of bentwood. Dimensional stability of bitter wood was found to be conspicuous. However the steaming treatment at lower temperatures, i.e., about $130^{\circ}C$ was not suitable for dimensional stability of bentwood. In compression wood, the used specimen was Italian poplar wood (Populus euramericana). Two heat compressive pressing conditions, an open-press system and an air-tighten closed-press system, were used. The recovery rate was measured after boiling and/or absorbing in water to estimate the dimensional stability of heat compressed wood. The best dimensional stability of compressed wood in the air-tighten closed-press system was found to be better at $200^{\circ}C$ than $180^{\circ}C$. The best compression rate for dimensional stability was 73 percent.

• 한국통신학회논문지
• /
• 제9권2호
• /
• pp.77-84
• /
• 1984

本論文에서는 二次元인 순회형 디지틀 필터의 安定度判別에 관한 한 方法을 提案하였다. 二次元系에서의 安定度에 관한 Liapunov의 定理를 기초로 하여 二次元傳達函數로부터 그의 狀態空間式을 유도하여 系行列에 Liapunov의 定理를 적용시켰다. 그 결과 종래의 像에 의하여 구한 결과와 일치하였으며 그의 계산양도 줄어들었음을 알 수 있다.

• Nuclear Engineering and Technology
• /
• 제33권4호
• /
• pp.409-422
• /
• 2001

The dynamic character of a system of the governing differential equations for the one- dimensional two-fluid model, where the momentum flux parameters are employed to consider the velocity and void fraction distribution in a flow channel, is investigated. In response to a perturbation in the form of a＇traveling wave, a linear stability analysis is peformed for the governing differential equations. The expression for the growth factor as a function of wave number and various flow parameters is analytically derived. It provides the necessary and sufficient conditions for the stability of the one-dimensional two-fluid model in terms of momentum flux parameters. It is demonstrated that the one-dimensional two-fluid model employing the physical momentum flux parameters for the whole range of dispersed flow regime, which are determined from the simplified velocity and void fraction profiles constructed from the available experimental data and $C_{o}$ correlation, is stable to the linear perturbations in all wave-lengths. As the basic form of the governing differential equations for the conventional one-dimensional two-fluid model is mathematically ill posed, it is suggested that the velocity and void distributions should be properly accounted for in the one-dimensional two-fluid model by use of momentum flux parameters.s.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.91-96
• /
• 2002

This study was carried out to estimate the property of dimensional stability of heat compression of italian poplar wood with low density. Firstly, two levels of pressure conditions were applied using the closed and open-press system. The thermal treatment temperatures were 180℃ and 200℃, respectively. Water absorption tests were conducted in water bath at 25℃ and 100℃ for 35 hours and 1 hour, respectively. The compression rates of wood were 47 percent, 60 percent, and 73 percent, respectively. From these tests, it was found that the dimensional stability of the closed-press system was superior to that of the open-press system. Furthermore, the dimensional stability of compressed wood in the closed-press system was better at 200℃ than 180℃. In compression rate, dimensional stability of 73 percent compression rate was the best result. Considering these results, the best conditions for the dimensional stability of compressed wood were those of the closed-compressing system at high temperatures above 200℃ and larger compression rate. Therefore, it was concluded that the dimensional stability of wood is improved at higher temperature and larger deformation.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.269-282
• /
• 2007

In this paper, we consider a two-dimensional fractional space-time diffusion equation (2DFSTDE) on a finite domain. We examine an implicit difference approximation to solve the 2DFSTDE. Stability and convergence of the method are discussed. Some numerical examples are presented to show the application of the present technique.

• 지질공학
• /
• 제21권1호
• /
• pp.57-64
• /
• 2011

화강암과 안산암질 암맥이 공존하고 있는 붕괴사변을 대상으로 지질에 의한 전단강도의 차이를 반영한 3차원 사면안정해석을 수행하였다. 지질이 서로 다른 두 종류의 파괴면에 대한 전단강도를 파악하기 위하여 흙-암 경계면 직접전단시험을 수행하였고, 또한 상부 풍화토층에 대한 실내토질시험을 실시하였다. 시험결과 풍화토층에 비하여 흙-암 경계면의 전단강도가 낮게 나타났다. 사면내 지질분포의 차이가 안정성해석 결과에 영향을 주는 것을 알아보기 위하여 한계평형법을 이용한 2차원사면안정성 해석을 대표단면에서 실시하였으며, 사면내 분포지질에 따라 입력치를 다르게 할 수 있는 3차원사면안정성해석을 실시하여 2차원안정성해석과 그 결과를 비교하였다. 해석결과에 의하면 안전율이 건기시 0.92와 포화시 0.32로 모두 불안정하게 나타난 2차원해석결과와는 달리 3차원해석결과에서는 건기시에 안전율이 1.26, 포화시에 0.55로 나타났다. 이러한 결과는 사면내 지질분포를 고려할 경우 안정성 해석의 결과가 달라질 수 있음을 보여주고 있으며, 우기 직후 붕괴가 일어났던 점을 고려하면 3차원해석결과가 보다 현실적인 것으로 판단된다.

• 한국가구학회지
• /
• 제13권1호
• /
• pp.2-8
• /
• 2002

This study was carried out to investigate the reasonable condition for better dimensional stability in woods by polyethylene glycol(PEG) treatment. Eight species grown in Kangwon-do were used for this study. Three species of softwoods(Pinus densiflora, Pinus koraiensis, Larix kaempferi) and two species of hardwoods(Prunus sargentii, Populus tomentiglandulosa) treated with 30% aqueous solution of PEG 1000 showed good dimensional stability under the treatment for 1 day. The dimensional stability of Betula davurica, Quercus mongolica and Quercus variabilis woods increased with increasing treatment time. From the above results, it was concluded that PEG penetration and dimensional stability were affected by characteristics of wood species such as density and structure.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.567-578
• /
• 2019

A common problem with fast-growing hardwoods is dimensional instability that limits use of their wood. In this study, we investigated the effects of pre-drying methods, temperatures, and heating duration on the specific gravity, water absorption, and dimensional stability of three tropical fast-growing hardwoods, jabon (Neolamarckia cadamba Roxb.), sengon (Falcataria moluccana Miq.), and mangium (Acacia mangium Willd.). Wood samples were pre-dried by two methods (fan and oven at $40^{\circ}C$), and heat treatments were performed at three temperatures (120, 150, and $180^{\circ}C$) for two different time periods (2 and 6 hours). The specific gravity, water absorption, dimensional stability, and structural changes of the samples were evaluated. The results revealed that heat treatments slightly reduced the specific gravity of all three wood species. In addition, the heat treatments reduced water absorption and significantly improved dimensional stability of the samples. Oven pre-drying followed by heat treatment at $180^{\circ}C$ for 6 hours resulted in good physical improvement of jabon and sengon wood. Fan pre-drying followed by heat treatment at $180^{\circ}C$ for 2 hours improved the physical properties of mangium wood. The heat treatment shows a promising technique for improving the physical characteristic of fast growing hardwoods.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.602-615
• /
• 2021

Red jabon wood is a potential fast-growing species for veneer, furniture, and many other wood products, but its durability is very low. The purpose of this study was to investigate the effects of castor bean oil and heating on boron leaching, dimensional stability, and resistance to decay fungi in treated jabon wood. Red jabon wood was preserved with boron solutions containing 5% boron (boric acid, borax, or borax-boric acid). Following that, castor bean oil impregnation and heating were used as posttreatments. Furthermore, all the wood samples were tested in terms of leaching, dimensional stability, and resistance against Schizophyllum commune and Fomitopsis palustris fungi. This study discovered that boron compounds, castor bean oil, and heating treatments influenced the leaching, dimensional stability, and resistance of red jabon wood to decay fungi. The double impregnation of boric acid or borax and castor bean oil, followed by heating at 160℃, significantly reduced water absorption and leaching while increasing the dimensional stability and resistance of red jabon wood against the two tested decay fungi.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.185-193
• /
• 2003

Basic flow fields of two dimensional V flames were examined as a preliminary work to study the instability of premixed flame with vorticity generation. Laminar premixed propane and methane flame were anchored by electrically heated wire to make two dimensional V flames. Flow fields were measured mainly by PIV(Particle Image Velocimetray) and the results were compared with those obtained by LDV(Laser Doppler Velocimetry) to confirm their reliability. Because the curvatures of V flames are so small, V flames were locally assumed to be inclined planar flames in gravitational field. The measured flow fields were locally compared with those of analytical solutions, which showed the qualitatively similar results. In downstream region, the vorticity fields were nearly constant except region near the center line, which support the assumption of locally one dimensional flame. Besides it was tried to find experimentally the similarity of flow fields in downstream region. Finally, stability diagram of propane and methane flames were drawn for the equivalence ratio less than one and the wide range of mean velocity.