• 지질학회지
• /
• 제54권5호
• /
• pp.477-488
• /
• 2018

유성이토는 현생 염하구 환경에서 흔히 발달하지만, 고기의 퇴적층에서 보고되고 퇴적학적으로 연구된 예는 드물다. 캐나다 앨버타주의 전기 백악기 맥머레이층에서 시추한 염하구 하도 퇴적층 내의 여러 이암층들은 고농도부유점토류에 의한 퇴적특징을 보인다. 이러한 이암층들을 현미경으로 자세히 관찰하여 3개의 미퇴적상(microfacies, <1~25 mm 두께)으로 구분하였다. 미퇴적상 1은 무구조의 이암(structureless mudstone)으로 주로 점토 입자로 구성되고 무질서하게 분포하는 조립질 입자(조립질 실트~세립질 모래)들을 포함한다. 조립질 입자들을 지지할 수 있는 양력을 지닌 점착성의 이토류, 즉 유성이토가 정지하여 미퇴적상 1이 퇴적된 것으로 해석된다(quasi-laminar plug flow). 미퇴적상 2는 실트엽층을 포함하는 이암(silt-streaked mudstone)으로 산재한 조립질 입자를 포함하는 이암으로 구성되며, 불연속적이고 매우 얇은 실트엽층을 포함한다. 미퇴적상 1과 유사한 조직을 보이므로, 미퇴적상 2도 점착성의 유성이토에 의해 퇴적된 것으로 해석된다. 하지만 불연속적인 실트엽층은 plug 아래에 간헐적이고 약한 난류운동이 있었음을 제시한다(upper transitional plug flow). 미퇴적상 3은 이질 엽층리의 이암(heterolithic laminated mudstone)으로 실트엽층과 점토엽층의 교호로 구성되며, 평행엽층리 또는 저각도 사엽층리를 보이고 간혹 낮은 기복의 연흔 형태를 보인다. 이질 엽층리는 점착성 plug 아래의 난류층에서 입자크기에 따른 분급작용이 일어났음을 지시하며, lower transitional plug flow 아래에서 발달하는 낮은 층면구조에 의해 형성되었을 것으로 해석된다. 이 미퇴적상들은 유속과 부유이토농도에 따라 달라지는 유성이토의 여러 가지 상을 나타낸다고 볼 수 있다. 다른 지역에서 유성이토층을 인지하고 이암의 퇴적작용을 보다 잘 이해하는데 본 연구의 결과가 중요한 지식을 제공하리라 생각된다.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.