• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.185-192
• /
• 1999

This paper presents the results of a parametric study on the behavior of tunnel face reinforced with horizontal pipes. A three-dimensional finite element model was adopted in this study to capture the three-dimensional nature of tunnel face behavior under various boundary conditions. A parametric study was peformed on a wide range of boundary conditions with emphasis on the effect of reinforcing layouts on the deformation behavior of tunnel face. The results of analysis such as tunnel face deformation behavior under various conditions were thoroughly analyzed, and a database for the behavior of tunnel face under different reinforcing conditions was established for future development of a semi-empirical design/analysis method for the tunnel face reinforcing technique. The results indicated that there exits an optimum reinforcing layout for a given tunnel condition, which must be selected with due consideration of tunnel geometry and ground condition.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.221-228
• /
• 2002

터널 굴착시 막장의 안정성은 주변지반 및 터널 지보재의 안정성과 아울러 가장 중요하게 평가되어야 할 요소 중의 하나이다. 특히 터널이 지하수위 하에서 시공될 경우 지하수 흐름에 따라 터널 막장에서 발생하게 되는 침투력은 터널 막장의 안정성에 심각한 영향을 미칠 수 있다. 따라서 본 침투력은 터널 설계 및 시공시 터널 막장의 안정성 측면에서 중요하게 평가되어야 할 요소이다. 본 연구에서는 지하수위 하에서 터널이 시공될 경우 발생하는 침투력과 관련하여 터널 굴진율이 본 칩투력에 미치는 영향에 대해서 언급하였다. 터널 굴진율을 고려한 지하수 흐름해석을 위하여 유한요소 해석 프로그램이 개발되었다. 본 프로그램을 이용하여 터널 굴진율 및 지반의 투수특성이 터널 막장에 작용하는 침투력에 미치는 영향을 매개변수 분석을 통하여 연구하였다. 본 연구결과, 터널 굴진율은 터널 막장에 작용하는 침투력을 평가하는데 있어서 중요한 추가된 요소로 고려되어야 하며, 결론적으로 터널 막장의 안정성을 유지하기 위한 지보압의 합리적인 산정을 위한 방법론을 제시할 수 있었다.

• 터널과지하공간
• /
• 제23권2호
• /
• pp.120-129
• /
• 2013

터널시공 중 발생한 변위를 설계단계에서 설정한 계측관리 기준변위와 비교하여 터널의 안정성을 평가할 때에는 터널막장 후방뿐만 아니라 전방에서 발생하는 변위를 포함한 총변위를 이용하여야 한다. 터널 시공 중 발생하는 총변위를 알기 위하여 터널막장에서 전방을 향해 수평경사계를 설치하여 지중침하를 계측하였고 터널 막장 후방에서는 천단침하계를 이용하여 터널의 천단침하를 계측하였다. 이를 통하여 터널시공 중 발생하는 총천단침하를 계측할 수 있었고 터널막장 전후방 종단선상의 침하곡선 특성도 분석하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.200-211
• /
• 2010

Tunnel Mapper, which is tunnel face survey system was used to conduct Face Mapping on the face of the tunnel that is under construction. Then, accuracy and utility value on the forecast of discontinuity were verified to verify the field application in order to present the measures for the use of the system for conducting research on the discontinuity. As result of the directivity verification following discontinuity‘s project, forecasted measurement and actually researched measurement error for the Dip direction and Dip angle was less than ${\pm}10$. Accuracy was 82.6% for Dip direction and 90.7% for Dip angle, which are high. Accordingly, face research discontinuity forecasting system's reliability level towards directivity is high. Tunnel Mapper, a tunnel face survey system can be leveraged to replace face's visual survey and to obtain objective information, enabling execution of the survey system that can automate face survey going beyond time and space related limitations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.41-48
• /
• 2001

In this study, two factors are simultaneously considered for assessing tunnel face stability: one is the effective stress acting on the tunnel face calculated by upper bound solution; and the other is the seepage force calculated by numerical analysis under the condition of steady-state groundwater flow. The seepage forces calculated by numerical analysis are compared with the results of a model test. From the results of derivations of the upper bound solution with the consideration of seepage forces acting on the tunnel face, it could be found that the minimum support pressure for the face stability is equal to the sum of effective support pressure and seepage pressure acting on the tunnel face. Also it could be found that the average seepage pressure acting on the tunnel face is proportional to the hydrostatic pressure at the same elevation and the magnitude is about 22% of the hydrostatic pressure for the drainage type tunnel and about 28% for the water-proof type tunnel. The model tests performed with a tunnel model had a similar trend with the seepage pressure calculated by numerical analysis. From the model tests it could be also found that the collapse at the tunnel face occurs suddenly and leads to unlimited displacement.

• 한국터널지하공간학회 논문집
• /
• 제12권5호
• /
• pp.369-378
• /
• 2010

본 논문은 터널굴착 시 야기되는 지반의 응력과 지표면의 침하량을 감소시키기 위한 터널막장 폐합시키는 기법에 대한 연구이다. 이 연구를 수행하기 위하여 실내모형실험과 수치해석적 분석을 실시하였다. 실내모형실험에 있어서는 터널막장의 폐합비, 터널깊이 그리고 터널굴착장에 따른 지반의 거동을 실험하였다. 이틀 모형실험 결과를 검증하기 위하여 3차원 수치해석을 실시하였으며 서로의 결과들을 비교 분석하였다. 그 결과 막장 폐합비가 작아질수록 터널막장과 지반침하에 안정성은 저하되는 것으로 나타났으며 막장 폐합비가 80% 이상일 경우에는 막장 안정성에 큰 문제가 없는 것으로 나타났다. 이러한 연구결과는 향후 경제적인 터널막장폐합시스템을 개발하는데 매우 유용 할 것으로 가대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 1999

Since Broms and Bennermark(1967) suggested the face stability criterion based on laboratory extrusion tests and field observations, the face stability of a tunnel driven in cohesive material has been studied by several authors. And recently, more general solution for the tunnel front is given by Leca and Panet(1988). They adopted a limit state design concept to evaluate the face stability of a shallow tunnel driven into cohesionless material and showed that the calculated upper bound solution represented the actual behavior reasonably well. In this study, two factors are simultaneously considered for assessing tunnel face stability: One is the effective stress acting on the tunnel front calculated by upper bound solution; and the other is the seepage force calculated by numerical analysis under the condition of steady state ground water flow. The model tests were performed to evaluate the seepage force acting on the tunnel front and these results were compared with results of numerical analysis. Consequently, the methodology to evaluate the stability of a tunnel face including limit analysis and seepage analysis is suggested under the condition of steady state ground water flow.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.79-86
• /
• 2000

This paper presents the results of a parametric study on the behavior of tunnel face reinforced with horizontal pipes. A series of reduced-scale model tests was carried out to in an attempt to verify previously performed three-dimensional numerical modeling and to investigate effects of reinforcement layout on the tunnel face deformation behavior The results of model tests indicate that the tunnel face deformation can significantly reduced by pre-reinforcing the tunnel face with longitudinal members and thus enhancing the tunnel stability. In addition, the model tests results compare fairly well with those from the previously performed three-dimensional finite element analysis. Therefore, a properly calibrated three dimensional model may effectively be used in the study of tunnel face reinforcing technique.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.327-333
• /
• 2002

In this study, the effect of tunnel advance rate on the seepage forces acting on the tunnel face was studied. The finite element program to analyze the groundwater flow around a tunnel with the consideration of tunnel advance rate was developed. Using the program, the parametric study for the effect of the tunnel advance rate and hydraulic characteristics of the ground on the seepage forces acting on the tunnel face was studied. From this study, it was concluded that the tunnel advance rate must be taken into consideration as an additional parameter to assess the seepage forces at the tunnel face and a rational design methodology for the assessment of support pressures required for maintaining the stability of the tunnel face was suggested for underwater tunnels.

• 한국지반공학회논문집
• /
• 제28권4호
• /
• pp.79-89
• /
• 2012

본 논문은 터널 굴착시 막장면 안정성 확보를 위한 막장폐합비에 따른 막장면 응력 및 지반거동을 분석하기 위해 실내모형실험 및 수치해석적 분석을 실시하였다. 실내모형실험에서는 터널막장면의 폐합비와 토피고에 따른 막장면 응력 및 지반의 거동을 실험하였다. 실내모형실험 결과를 검증하기 위하여 2차원 수치해석을 실시하였으며 이들 서로의 결과들을 비교 분석하였다. 그 결과 막장 폐합비가 증가할수록 터널 막장면 안정성 확보가 가능할 것으로 판단되며 막장 폐합비가 80% 이상일 경우에는 막장 안정성에 큰 문제가 없는 것으로 나타났다. 이러한 연구결과는 향후 경제적인 터널 막장폐합시스템을 개발하는데 매우 유용할 것으로 기대된다.