• International Journal of Industrial Entomology and Biomaterials
• /
• v.32 no.1
• /
• pp.1-11
• /
• 2016

Tropical tasar silkworm, Antheraea mylitta is a commercial forest silkworm in India that produces tasar silk, but never experimented in Uttarakhand, a Himalayan state of India. A. mylitta express divergent phenotypic characters under different ecological conditions; so, we studied the effect of seven forest tree species in two rearing seasons on variability in silk gland weight of Daba (bivoltine) ecorace of A. mylitta at Forest Research Institute in Dehra Dun, Uttarakhand during 2012 and 2013. We used two-way completely randomized block factorial design and Post HOC Tukey's HSD test to analyse the collected data and there after carried out multiple regression analysis. Results indicated that silk gland weight differed significantly between rearing seasons (DF=1, F=2333.98, p <0.05), host plants (DF 6, F= 1516.25, p <0.05) and their interactions (DF=6, F=7.10, p <0.05). Higher silk gland weight was found in second rearing season than the first on all the host tree species. Terminalia alata fed A. mylitta larvae showed the highest silk gland weight of 8.03 and 9.47 g in first and second rearing seasons, followed by T. tomentosa (7.19 & 9.01g), T. arjuna (6.8 & 8.08 g) and L. speciosa (6.57 & 7.83 g) fed larvae, respectively. Post HOC Tukey's HSD test indicated that silk gland weight of L. speciosa and T. arjuna fed larvae in both the rearing seasons did not differ significantly. E.I. analysis also confirmed that T. alata, T. tomentosa, T. arjuna and L. speciosa are better in their order of merit than T. bellirica , T. chebula and L. tomentosa. Multiple regression analysis indicates that larval weight gain is a strong predictor (β=1.002, t=346.777, p = <0.05) for the silk gland weight of A. mylitta ; however, larval duration had significant negative regression weight (β=-0.270, t=-8.436, p = <0.05) on mean weight of silk gland.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.21-29
• /
• 2014

Due to enormous number of user and limited memory space, the memory saving is become an important issue for big data service these days. In the large scaled multiple-input multiple-output (MIMO) system, the Teoplitz channel can play the significance rule to improve the performance as well as power efficiency. In this paper, we propose a Toeplitz channel decomposition based on matrix vectorization. Here we use Toeplitz matrix to the channel for large scaled MIMO system. And we show that the Toeplitz Jacket matrices are decomposed to Cooley-Tukey sparse matrices like fast Fourier transform (FFT).

• The Journal of Advanced Prosthodontics
• /
• v.10 no.3
• /
• pp.177-183
• /
• 2018

PURPOSE. The purpose of the current study was to evaluate the effect of incorporating nanoparticles of silver (NAg) and amorphous calcium phosphate (NACP) into a self-etching primer of a resin cement on the microtensile bond strength of dentin, regarding the proven antibacterial feature of NAg and remineralizing effect of NACP. MATERIALS AND METHODS. Flat, mid-coronal dentin from 20 intact extracted human third molars were prepared for cementation using Panavia F2.0 cement. The teeth were randomly divided into the four test groups (n=5) according to the experimental cement primer composition: cement primer without change (control group), primer with 1% (wt) of NACP, primer with 1% (wt) of physical mixture of NACP+Nag, and primer with 1% (wt) of chemical mixture of NACP+Nag. The resin cement was used according to the manufacturer's instructions. After storage in distilled water at $37^{\circ}C$ for 24 h, the bonded samples were sectioned longitudinally to produce $1.0{\times}1.0mm$ beams for micro-tensile bond strength testing in a universal testing machine. Failure modes at the dentin-resin interface were observed using a stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's post-hoc tests and the level of significance was set at 0.05. RESULTS. The lowest mean microtensile bond strength was obtained for the NACP group. Tukey's test showed that the bond strength of the control group was significantly higher than those of the other experimental groups, except for group 4 (chemical mixture of NACP and NAg; P=.67). CONCLUSION. Novel chemical incorporation of NAg-NACP into the self-etching primer of resin cement does not compromise the dentin bond strength.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.613-618
• /
• 2020

The average dose of Fast Low Dose C-arm CT used during hepatic arterial chemoembolization was compared with the average dose of DSA, and the exposure dose was analyzed by analyzing the average dose for each test technique in the total accumulated dose. 50 patients were randomly selected at our clinic and compared with Fast Low Dose C-arm CT, DAP and Air Kerma of DSA, and the accumulation of four test techniques (DSA, Fast Low Dose C-arm CT, Roadmap, Fluoroscopy) The proportion of dose (DAP, Air Kerma) was analyzed. For statistical comparative analysis, the corresponding sample T test and ANOVA test (post hoc test: Tukey) were performed using the statistical program SPSS 20.0. Fast Low Dose C-arm CT showed statistically significantly lower average dose (DAP, Air Kerma) than DSA. Reducing the number of tests for DSA can reduce the patient's exposure to medical radiation.

• The Korean Journal of Applied Statistics
• /
• v.30 no.6
• /
• pp.1027-1036
• /
• 2017

Multiple comparisons are required to confirm whether or not something is significant if the null hypothesis to test whether the difference between more than three treatments is rejected in a one-way layout. There are both parametric multiple comparison method Tukey (1953) and Nonparametric multiple comparison method based on Kruskal-Wallis (1952).This procedure is applied to a mixed sample of all data and then an average ranking is used for each of three or more treatments. In this paper, a new nonparametric multiple comparison procedure based on joint placements for a one-way layout as extension of the joint placements described in Chung and Kim (2007) was proposed. Monte Carlo simulation is also adapted to compare the family wise error rate (FWE) and the power of the proposed method with previous methods.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.462-467
• /
• 2014

PURPOSE. This study investigated the influence of surface conditioning procedures and repeated firings on monoclinic content and strength of zirconia before cementation. MATERIALS AND METHODS. Sintered bar-shaped zirconia specimens were subjected to no surface treatment (control), air abrasion, or grinding (n=21). Their roughness was evaluated using a profilometer, and microscope analysis was performed on one specimen of each group. Then, 2 or 10 repeated firings (n=10) were executed, the monoclinic content of specimens was analyzed by X-ray diffraction, and a three-point flexural strength test was performed. Surface roughness values were compared using one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests, the monoclinic content values were tested using Kruskal-Wallis and Mann-Whitney U tests, and the flexural strength values were tested using two-way ANOVA and Tukey HSD tests (P=.05). Spearman's correlation test was performed to define relationships among measured parameters. RESULTS. Surface-treated specimens were rougher than untreated specimens and had a higher monoclinic content (P<.005), and the relationship between roughness and monoclinic content was significant (P<.000). Neither surface treatment nor firing significantly affected the flexural strength, but Weibull analysis showed that for the air-abraded samples the characteristic strength was significantly lower after the $10^{th}$ firing than after the $2^{nd}$ firing. CONCLUSION. After firing, a negligible amount of monoclinic content remained on the zirconia surfaces, and rougher surfaces had higher monoclinic contents than untreated surfaces. Multiple firings could be performed if necessary, but the fracture probability could increase after multiple firings for rougher surfaces.

• Restorative Dentistry and Endodontics
• /
• v.28 no.4
• /
• pp.354-359
• /
• 2003

This study evaluated the effectiveness of the light emitting diode(LED) units for composite curing. To compare its effectiveness with conventional quartz tungsten halogen (QTH) light curing unit. the microhardness of 2mm composite. Z250, which had been light cured by the LEDs (Ultralume LED2, FreeLight, Developing product Dl) or QTH (XL 3000) were compared on the upper and lower surface. One way ANOVA with Tukey and Paired t-test was used at 95% levels of confidence. In addition. the amount of linear polymerization shrinkage was compared between composites which were light cured by QTH or LEDs using a custom-made linometer in 10s and 60s of light curing, and the amount of linear polymerization shrinkage was compared by one way ANOVA with Tukey. The amount of polymerization shrinkage at 10s was XL3000 > Ultralume 2. 40. 60 > FreeLight, D1 (P<0.05) The amount of polymerization shrinkage at 60s was XL3000 > Ultralume 2, 60> Ultralume 2.40 > FreeLight, D1 (P<0.05) The microhardness on the upper and lower surface was as follows ; (equation omitted) It was concluded that the LEDs produced lower polymerization shrinkage in 10s and 60s compared with QTH unit. In addition. the microhardness of samples which had been cured with LEDs was lower on the lower surfaces than the upper surfaces whereas there was no difference in QTH cured samples.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.352-358
• /
• 2006

The purpose of this study was to investigate the influence of thickness on the degree of cure of dual-cured composite core. 2, 4, 6, 8 mm thickness Luxacore Dual and Luxacore Self (DMG Inc, Hamburg, Germany) core composites were cured by bulk or incremental filling with halogen curing unit or self-cure mode The specimens were stored at $37^{\circ}C$ for 24 hours and the Knoop's hardness of top and bottom surfaces were measured. The statistical analysis was performed using ANOVA and Tukey's test at p = 0.05 significance level. In self cure mode, polymerization is not affected by the thickness. In Luxacore dual, polymerization of the bottom surface was effective in 2, 4 and 6 (incremental) mm specimens. However the 6 (bulk) and 8 (bulk, incremental) mm filling groups showed lower bottom/top hardness ratio (p < 0.05). Within the limitation of this experiment, incremental filling is better than bulk filling in case of over 4 mm depth, and bulk filling should be avoided.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.496-505
• /
• 2017

This study is a descriptive study to investigate the effect of depression and self-esteem on suicidal ideation in nursing college students. Data collection was conducted from May to July 2015 for 3 nursing students. Data were analyzed by descriptive statistics, t-test, ANOVA, tukey post hoc test, Pearson's correlation and multiple regression. There were significant differences in depression with grade and school life satisfaction, self-esteem in sex, grade, grade, and school life satisfaction and suicidal ideation showed differences in school life satisfaction. There were positive correlation between depression and suicidal ideation, while there were negative correlation between self-esteem and suicidal ideation, and depression. The factors affecting suicidal ideation were depression(${\beta}=.346$, p=.000) and self-esteem(${\beta}=-.290$, p=.000). The explanatory power of the variables was 33.2%. This study suggests that a systematic education on depression and self-esteem is needed to reduce the suicidal ideation of nursing college students.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.99-109
• /
• 2019

We compared the confidence intervals of estimators using various bootstrap methods for a Random Coefficient Autoregressive(RCA) model. We consider a Quasi score estimator and M-Quasi score estimator using Huber, Tukey, Andrew and Hempel functions as bounded functions, that do not have required assumption of distribution. A standard bootstrap method, percentile bootstrap method, studentized bootstrap method and hybrid bootstrap method were proposed for the estimations, respectively. In a simulation study, we compared the asymptotic confidence intervals of the Quasi score and M-Quasi score estimator with the bootstrap confidence intervals using the four bootstrap methods when the underlying distribution of the error term of the RCA model follows the normal distribution, the contaminated normal distribution and the double exponential distribution, respectively.