• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.337-346
• /
• 2019

The present paper tries to contribute fill the gap of application of the component method to tubular connections. For this purpose, one typical joint configuration in which just one component can be considered as active has been studied. These joints were selected as symmetrically loaded welded connections in which the beam width was the same as the column width. This focused the study on the component 'side walls of rectangular hollow sections (RHS) in tension/compression'. It should be one of the main components to be considered in welded unstiffened joints between I beams and RHS columns. Many experimental tests on double-sided I-beam-to-RHS-column joint with a width ratio 1 have been carried out by the authors and a finite element (FE) model was validated with their results. Then, some different analytical approaches for the component stiffness and strength have been assessed. Finally, the stiffness proposals have been compared with some FE simulations on I-beam-to-RHS-column joints. This work finally proposes the most adequate equations that were found for the stiffness and strength characterization of the component 'side walls of RHS in tension/compression' to be applied in a further unified global proposal for the application of the component method to RHS.

• Steel and Composite Structures
• /
• 제48권6호
• /
• pp.667-679
• /
• 2023

Concrete filled rectangular steel tubular (CFRST) composite truss girder is composed of the CFRST truss and concrete slab. The failure mechanism of the girder was different under bending and shear failure modes. The bending and shear strength of the girder were investigated experimentally. The influences of composite effect and shear to span ratio on failure modes of the girder was studied. Results indicated that the top chord and the joint of the truss were strengthened by the composited effect. The failure modes of the specimens were changed from the joint on top chord to the bottom chord. However, the composite effect had limited effect on the failure modes of the girder with small shear to span ratio. The concrete slab and top chord can be regarded as the composite top chord. In this case, the axial force distribution of the girder was close to the pin-jointed truss model. An approach of strength prediction was proposed which can take the composite effect and shear to span ratio into account. The approach gave accurate predictions on the strength of CFRST composite truss girder under different bending and shear failure modes.

• 대한골관절종양학회지
• /
• 제9권2호
• /
• pp.217-222
• /
• 2003

거대세포종은 주로 대퇴골 원위단, 경골 근위단, 요골 원위단등 장관골의 골간단부를 침범하여 팽창되는 골붕해성 병변을 일으키며 또한 그 치료 방법에 대해서도 골소파, 골소파 및 골이식 절제, 방사선조사, 절단, 한냉수술등 아직 특별한 원칙이 없는 상태이다. 본 교실에서 는 19세 남자의 슬개골에 발생한 거대세포종에 대해서 골 소파술후 자가골 이식술을 시행하였으며 이 결과를 문헌고찰과 함께 보고하는 바이다.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.207-214
• /
• 2003

The fatigue behaviour of six different hollow section T-joints subjected to out-of-plane bending moment was investigated experimentally using scaled steel models. The joints had circular brace members and rectangular chord members. Hot spot stresses and the stress concentration factors. (SCFs) were determined experimentally. Fatigue testing was carried out under constant amplitude loading in air. The test results have been statistically evaluated, and show that the experimental SCF values for circular-to-rectangular (CHS-to-RHS) hollow section joints were found to be below those of circular-to-circular (CHS-to-CHS) hollow section joints. The fatigue strength, referred to experimental hot spot stress, was in reasonably good agreement with referred fatigue design codes for tubular joints.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.59-72
• /
• 1990

본 논문은 해양 구조물에 대한 확률적 기법을 이용한 스펙트럴 피로해석 방법에 대하여 기술하고 있다. 환경조건 특히 파도 및 관련된 해상상태, 파도 스펙트럼에 대하여 조사하였다. 각종 공식을 이용한 응력 집중계수와 유한요소법을 이용한 응력 집중계수 산출 방법 및 피로수명에 대한 그 영향에 대하여 연구하고, S-N선도의 선택과 해상상태의 간략화 문제등에 관해서도 다루었다. 마지막으로 스펙트럴 피로해석 기법을 응용한 실제 피로해석 사례 연구를 통하여 본 방법의 유용성을 입증하였다.

• Composites Research
• /
• 제25권1호
• /
• pp.14-18
• /
• 2012

구조용 접착제는 알루미늄이나 복합재료 같은 가벼운 재질의 접합에 적용함으로써 자동차의 경량화를 이루어 연비 및 승차감등 성능향상에 큰 효과를 얻을 수 있다. 자동차와 같이 충돌환경에 노출이 되어있는 기계 구조물에 접착제를 적용하기 위해서는 접착제의 충격특성에 관한 연구가 필수적이다. 본 연구에서는 pin-ring 타입의 접착조인트를 이용하여 접착제의 전단 충격특성에 관한 연구를 수행하였으며, 충돌해석을 하기 위해 LS-DYNA를 사용하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.21-29
• /
• 2014

본 연구에서는 모노파일지지구조의 고성능 그라우트연결부의 부착거동을 다루고 있다. 강관파일 연결부의 일체화를 위하여 섬유보강 고성능 그라우트를 개발하였으며, 재령 7일 압축강도 125MPa와 직인장강도 7.5MPa를 나타내었다. 축하중을 받는 상태에서의 그라우트의 부착거동을 평가하기 위하여 강관파일에 그라우트를 충진하여 부착실험을 수행하였으며, 그 결과를 기존의 설계기준과 분석하였다. 실험변수는 섬유혼입율 (0%, 0.5% and 0.9%), 섬유의 형상비 (60 and 80)와 전단키의 높이와 간격의 비 (0.013 and 0.056)로 선정하였다. 실험결과 최대부착강도는 30.8MPa로 관찰되었으며, 섬유 혼입율보다는 전단키의 높이와 간격의 비가 부착강도에 영향을 미치는 것으로 분석되었다.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1305-1330
• /
• 2015

The successful application of the component-based approach - widely used to model structural joints - requires knowledge of the mechanical properties of the constitutive joint components, including an appropriate assembly procedure to derive the joint properties. This paper presents a component-method model for a structural joint component that is located in the tension zone of blind-bolted connections to concrete-filled tubular steel profiles. The model relates to the response of blind-bolts with headed anchors under monotonic loading, and the blind-bolt is termed the "Extended Hollo-bolt". Experimental data is used to develop the model, with the data being collected in a manner such that constitutive models were characterised for the principal elements which contribute to the global deformability of the connector. The model, based on a system of spring elements, incorporates pre-load and deformation from various parts of the blind-bolt: (i) the internal bolt elongation; (ii) the connector's expanding sleeves element; and (iii) the connector's mechanical anchorage element. The characteristics of these elements are determined on the basis of piecewise functions, accounting for basic geometrical and mechanical properties such as the strength of the concrete applied to the tube, the connection clamping length, and the size and class of the blind-bolt's internal bolt. An assembly process is then detailed to establish the model for the elastic and inelastic behaviour of the component. Comparisons of model predictions with experimental data show that the proposed model can predict with sufficient accuracy the response of the component. The model furthers the development of a full and detailed design method for an original connection technology.

• Structural Engineering and Mechanics
• /
• 제68권4호
• /
• pp.475-483
• /
• 2018

Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.

• 대한골관절종양학회지
• /
• 제13권1호
• /
• pp.43-47
• /
• 2007

Sj$\"{o}$gren 증후군은 외분비샘에 임파구 침윤으로 발생한 안구와 구강 건조를 특징적인 증세로 하는 만성적이며 서서히 진행하는 자가면역질환이나 저자들은 건조성 증세 없이 전신적 증세만을 호소하였으며 방사선 검사상 다발성 근골격계 전이로 오인되었으나 신세뇨관 산증을 동반한 일차성 Sj$\"{o}$gren 증후군으로 확진되었던 증례를 경험하였기에 보고하고자 한다.