• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.46-52
• /
• 2003

In this paper, we fabricated PRT(platinum resistance thermometers) with the trimming technology using high fine laser system. U. V.(wavelength： 355nm) laser was mainly used for adjusting Pt thin films resistors to 100Ω at 0$^{\circ}C$. Internationally, the accepted A-class tolerance of temperature sensor is ${\pm}$0.06Ω at 0$^{\circ}C$. according to DIN EN 60751. The width of trimmed lines was about 10$\mu\textrm{m}$ and the best trimming conditions of Pt thin films were power : 37mW, frequency : 200Hz and bite size：1.5$\mu\textrm{m}$. And 96 resistors, fabricated by photolithography and etching process, have 79∼90Ω and 91∼102Ω as the proportion of 45.7% and 57.3%, respectively. As result of sitting Pt thin films resistors to the target value(109.73Ω at 25$^{\circ}C$), 82.3% of all resistors had the tolerance within ${\pm}$0.03Ω and the others(17.7％) were within ${\pm}$0.06Ω of A-class tolerance. The PRTs which wore fabricated in this research had excellent characteristics as follows； high accuracy, international standard TCR(temperature coefficient of resistance) value, long-term stability, wide temperature range, good linearity and repeatability, rapid response time, etc.

• 대한전자공학회논문지
• /
• 제8권5호
• /
• pp.10-19
• /
• 1971

음성 전단증폭기를 후막집적회로기술을 이용하여 집적회로화하는데에 파생되는 여러가지 기술적인 문제를 실제로 연구개발을 실시한 경험을 토대로 소개하였다. 특히 전자계산기를 이용한 회로해석을 통하여 전단증폭기의 성능을 가장 민감하게 좌우하는 저항소자를 찾아 내므로써 크기의 아루미나 기판상에 집적된 7개의 저항중에서 한개만을 조정하여도 원하는 주파수특성을 얻을 수 있음을 확인하였다. 이로써 7개의 저항을 설계치에 맞게 각각 조정하는 작업을 하지 않고 그 중 하나만을 원하는 특성이 나타날때까지 조정하는 기능조정방법을 찾아내어 조정작업에 소요되는 인건비를 1/7로 절감할 수 있도록 하였다. 이 외에도 저항체와 도체간의 접촉문제라든가, 크로쓰오바의 기생용량문계 또는 저항조정방법에 따르는 잡음도의 변화문제에 대해서도 상세히 다루었다.

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.42-48
• /
• 2003

Lever II 헬리콥터 비행운동 방정식으로부터 주기성 트림해를 구하기 위해 DAE 해법에 근거한 PPTA(Partial Periodic Trimming Algorithm)를 제안하였다. PPTA의 반복계산으로 수정된 상태변수는 적합한 초기조건이 요구되는 DAE해법에서 수치불안정을 일으킬 수 있다. 간단하게 DAE 차수를 조절함으로써 정확한 주기성 트림을 얻을 수 있었다. 수치해법을 CBM(Common Baseline Model) 헬리콥터에 적용하여 harmonic balance 방법과 동일한 트림해를 얻었으며 시뮬레이션 초기의 과도응답을 효과적으로 제거할 수 있음을 밝혔다.

• 한국축산식품학회지
• /
• 제35권6호
• /
• pp.715-720
• /
• 2015

This study was conducted to determine the effects of beak trimming, stocking density (D) and sex (S) on live weight (LW), carcass yield and its component, and plasma glucose (PG) and triglyceride levels in Large White turkeys. To accomplish this aims, totally 288 d old large white turkey chicks (144 in each sex) were used. Beaks of 77 male and female poults were trimmed when 8 d old with an electrical beak trimmer. The birds were fed by commercial turkey rasion. Experiment was designed as 2 × 2 × 2 factorial arrangement with 3 replications in each group. Beak trimming and stocking density did not affect live weight, carcass composition and its components. The higher LW and carcass weight observed in trimmed groups. As expected, male birds are heavier than female, and carcass percentage (CP) would be adverse. However, in this study, CP of male was higher in trimmed, in 0.25 m²/bird. (D) × sex (S) interaction had an effect on both CP and thigh weights (p<0.05). Significantly D × S was observed in LW, CP and PG. The weight of carcass and its some components were higher in male. S × D interaction had an effect on plasma glucose level (p<0.05). Triglyceride level was affected (p<0.05) by sex. Significant relationships were found between percentage of thighs (r=0.447, p<0.01) and percentage of breast (r=0.400, p<0.01). According to this study, it can be said that trimming is useful with density of 0.25 m²/bird in turkey fattening.

• 패션비즈니스
• /
• 제26권5호
• /
• pp.1-21
• /
• 2022

Purpose of this study is to develop fashion design with greater added value and to seek the expandability of its expression domain by applying special computer code and tape embroidery machine capable of creating more special and fancier fashion to the development of fashion design by focusing on the fashion decorations that are becoming increasingly more computer systematized. For this purpose, expression techniques and effects of computer embroidery machine code and tape trimming decoration techniques, and cases of modern fashion design are examined. Major images are then deduced to designing and production of actual 6 creative pieces equipped with creativity and commercial value by applying such images deduced. As the results, it is not only possible to develop highly value added fashion design by utilizing mixed computer embroidery machine code and tape trimming decoration technique but also to produce countlessly new and unique surfaces by inducing changes in diversified pattern expressions, thickness of cord thread, and width, color and texture of material, etc. of the tape. This can maximize the expression domain of design, and fulfill the fashion desires of consumers wanting modern enhancement of quality and individualization. If multilateral attempts and studies for the aforementioned purposes can be expanded continuously, it is deemed possible to broaden the range of expression techniques in fashion design and, moreover, to make contribution towards enhancement of competitiveness of fashion industry.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1278-1284
• /
• 1992

본 연구에서는 무전단 후판압연기술을 위한 요소기술로써 지난호에 게재한 오버랩연구에 이어 모델압연 실험과 유한요소 해석을 이용한 에징시 비정상부의 폭변 형거동에 대한 연구결과를 보고한다.

• 소성∙가공
• /
• 제12권3호
• /
• pp.208-213
• /
• 2003

The methodology to design initial blanks considering the reduction of both springback and flange trimming amounts is studied. Three dimensional forming analysis of a trial blank Is first carried out using FEM and the tentative Initial blank shape is then determined by cutting the outer edge of the trial blank whose shape is nearly matched with the trimming line. During the shaping the blank edge, tile movement of blank outer line is described with random variables to reduce the sensitivity of initial blank geometry. After performing 2-D FEM forming and springback simulations for selected sections and optimizing the trimming and springback amounts in terms of section length of the blank, the initial blank is finally determined. In order to see tile springback reduction in the initial blank determined by the proposed method, a stepped s-rail is stamped and the sppingback is measured. The springback of newly designed initial blank of stopped s-tail is tremendously reduced.

• 대한기계학회논문집B
• /
• 제35권9호
• /
• pp.875-882
• /
• 2011

회전차 외경 가공에 따른 축추력 평형 및 체적 효율 변화에 대하여 고찰하였다. 평형장치로 평형피스톤이 장착된 저비속도 다단 원심 펌프를 연구 대상으로 해석을 수행하였다. 수평축 다단 펌프와 2종의 수직축 다단 펌프에 대해 해석 수행을 한 결과, 회전차 외경 가공에 의해 펌프 전방으로 추가적인 축추력이 발생하였다. 이러한 축추력 불균형은 수평축 펌프보다 수직축 펌프에서 크게 발생하였다. 축추력 불균형을 방지하기 위해 평형피스톤의 외경을 증가시키는 방안을 제시하였고, 이를 위해 필요한 평형피스톤의 직경 변화율을 산출하였다. 피스톤의 직경 변화량은 회전차 외경 가공률에 비례하여 증가하였다. 피스톤 직경 변화량이 클수록 틈새 면적 증가로 인해 체적효율이 감소하므로, 피스톤의 길이를 함께 증가시켜 체적 효율의 감소를 방지하는 것이 효과적이다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 춘계학술발표논문집
• /
• pp.216-219
• /
• 2007

본 논문에서는 영상 인식을 위해 그레이 레벨로 획득된 영상을 이진화할 때 발생되어 패턴의 윤곽선을 울퉁불퉁하게 만드는 랜덤 노이즈를 제거하기 위한 방법으로 체인 코드 트리밍(chain code trimming) 을 제안한다. 제안된 방법은 패턴의 외부 윤곽선과 내부 윤곽선의 체인 코드 분석을 통해 랜텀 노이즈의 체인 코드를 제거, 교정함으로서 이루어진다. 실험에서는 트리밍을 사용하기전과, 단순 트리밍을 한 경우, 체인 코드 트리밍을 한 경우를 서로 바로, 분석한다. 실험 결과는 패턴에 첨부되었던 랜덤 노이즈가 모두 성공리에 제거된 것을 보인다.

• 대한수의사회지
• /
• 제23권2호
• /
• pp.105-107
• /
• 1987

Ear trimming was performed with improved method experimentally on 10 dogs, raised in animal hospital in Chungnam national university. Desired length of each ear was measured and each ear was notched with scissors. A pair of intestinal forceps is fixed to