• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.900-903
• /
• 2007

We introduce non-contact surface modification using trimethylchlorosilane (TMCS) for thin film transistor application. The surface is not contacted to the TMCS solution because it is vaporized at room temperature. The hydrophobic surface with contact angle $of\;{\sim}\;70^{\circ}$ can be achieved by the transfer of TMCS using a PDMS mold.

• 공업화학
• /
• 제7권6호
• /
• pp.1204-1208
• /
• 1996

파라자일렌(p-xylene)을 산화반응시켜 테레프탈산(terephthatic acid)을 제조하는 과정 중에 발생하는 주요 유기불순물을 효과적으로 분석하는 방법을 수립하였다. 이 제조공정 중에 발생하는 유기불순물은 매우 다양하나, 여기에서는 주로 benzoic acid, p-toluic acid, p-tolualdehyde, 4-carboxybenzaldehyde, phthalic acid, isophthalic acid, trimellitic acid와 4-hydroxymethyl benzoic acid 등의 유기불순물을 분석하는데 촛점을 맞추었다. 이 유기물들은 공정 중의 모액이나 고체상태의 테레프탈산 입자에 존재하는데, 이들을 동시에 분석하기 위해 99% bis(trimethylsilyl)trifluoroacetamide와 1% trimethylchlorosilane의 내부표준용액과 pyridine의 혼합용액내에서 trimethylsilylation으로 시료를 전처리하고 gas chromatography를 이용하여 분석한 결과 상기한 유기물이 모두 성공적으로 분리되어 50분 이내에 정량분석할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.422-426
• /
• 1999

The Grignard reactions of bis(chloromethyl)dimethylsilane (1) with trimethylchlorosilane (2) in THF give both the intermolecular C-Si coupling and intramolecular C-C coupling products. At beginning stage, 1 reacts with Mg to give the mono-Grignard reagent ClCH2Me2SiCH2MgCl (1) which undergoes the C-Si coupling reaction to give MC2Si(CH2SiMe3)2 3, or C-C coupling to a mixture of formula Me3SiCH2(SiMe2CH2CH2)nR1 (n = 1, 2, 3, ..; 4a, R1I = H: 4b, R1 = SiMe3). In the reaction, two reaction pathways are involved: a) Ⅰ reacts with 2 to give Me3SiCH2SiMe2CH2Cl 6 which further reacts with Mg to afford a Me2SiCH2Mel-SiCH2MgCl (Ⅱ) or b) I cyclizes intramolecularly to a silacyclopropane intermediate A, which undergoes a ring-opening polymerization by the nucleophilic attack of the intermediates I or Ⅱ, followed by the termination reaction with H2O and 2, to give 4a and 4b, respectively. As the mole ratio of 2/1 increased from 2 to 16 folds, the formation of product 3 increased from 16% to 47% while the formation of polymeric products 4 was reduced from 60% to 40%. The intermolecular C-Si coupling reaction of the pathway a becomes more favorable than the intramolecular C-C coupling reaction of the pathways b at the higher mole ratio of 2/1.

• Biomolecules & Therapeutics
• /
• 제1권2호
• /
• pp.143-150
• /
• 1993

The metabolic profile of triprolidine, 2-[(4-methylphenyl)-3-(1-pyrrolidinyl-1-propenyl)] pyridine, was determined. Urinary extracts obtained with enzyme hydrolysis were derivatized with MSTFA/TMSCl (N-methyl-N-trimethylsilyl trifluoroacetamide/trimethylchlorosilane) and analyzed by GC/MSD. In human urine, which were obtained after the oral administration with triprolidine, hydroxymethyltriprolidine, triprolidine carboxylic acid, oxotriprolidine carboxylic acid and unchanged triprolidine were detected. The maximum urinary excretion rate of triprolidine and hydroxymethyltriprolidine which were extracted from human urine was at 2 to 4 hours after the drug administration. Triprolidine and hydroxymethyl triprolidine were identified by comparison with authentic standards In chromatographic and mass spectral properties. Triprolidine carboxylic acid was detected as a major metabolite of its metabolites in the urine. Oxotriprolidine carboxylic acid and triprolidine carboxylic acid were tentatively identified by the interpretation of its mass spectral patterns. These data suggest that in human, hydroxylation of either the benzyl or pyrrolidine ring can occur during triprolidine elimination.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.123-123
• /
• 2010

The hydrophobic coating for multi-walled nanotubes was treated with toluene and trimethylchlorosilane glow discharge plasma under low pressure, and the hydrophobic surface of the treated MWCNT was investigates. In order to investigate the effects of -CH components from the toluene and TMCS glow plasma, we conducted on the total surface free energies of the MWCNT powder, which was calculated by measuring the contact angle between the cushion of MWCNT powder and the probe liquids. The total surface free energies were determined by Owens-Wendt equation and drastically decreased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.256-256
• /
• 2011

Using plasmas, hydrophobic surfaces are made on various substances such as polyimide films, filter paper, cotton clothes and multi-walled carbon nanotube (MWCNT) with hexamethyldisiloxane (HMDSO), trimethylchlorosilane (TMCS) and toluene reagents. Plasmas are easily and rapidly to change surface of hydrophilic materials into hydrophobic. We have also optimized processing time and maximized contact angle for super-hydrophobicity of MWCNT. Contact angles have been calculated by measuring between substance and probe liquid, and total surface free energies are determined by the Owens-Wendt equation. Figure 1 shows the measured contact angles with time and ratio of reagents on MWCNT.

• 약학회지
• /
• 제26권2호
• /
• pp.129-132
• /
• 1982

A GC/MS method was developed to analyze phenolic acid extract from tobacco leaf. Extracted acids were converted to their methyl esters by refluxing with 3M hydrogen chloride in methanol, and the esters were reacted with his (trimethylsilyl) trifluoroacetamide plus 10% trimethylchlorosilane to silylate the phenolic groups. Derivatives of standard salicylic, p-hydroxybenzoic, vanillic, gentisic, p-coumaric, syringic, ferulic, and sinapic acids prepared by this procedure were analyzed by GC/MS on $20m{\times}0.2mm$ column of SE-54 glass capillary. GC/MS analysis of the extract from tobacco leaf revealed the presence of salicylic, p-hydtoxybenzoic, vanillic, gentisic, protocatechuic, p-coumaric, syringic, gallic, ferulic, caffeic, sinapic, and quinic acids, respectively. The quantitative analysis of these phenolic acids were achieved by using multiple ion selection technique.

• 동아시아식생활학회지
• /
• 제4권1호
• /
• pp.79-86
• /
• 1994

Food quality in food processing and storage were affected by the kinds of phenolics involved. To analyze phenolics of Chebulae Fructus by the way of GC-MSm methylation and trimethylsilyation(TMS) are necessary. The methods of methylation were dimethyl sulfate method and diazomethane method. so this study was undertaken to research the better methylation method before measuring GC-MS. But dimethyl sulfate method of methylation was not sufficient to analyze phenolics. So the phenolics of Chebulae Fructus were analyzed by the diazomethane methylation method and TMS with the pyridine, N-O-bis-trimethylsilyl-acetamide(BSTFA) and trimethylchlorosilane(TMCS). With the exception of pyrogallol and phloroglucinol in insoluble phenolics of Chebulae Fructus, the greater part of phenolics. analysis could be analyzed by GC-MS in company with diazomethane methylation method and TMS.

• 약학회지
• /
• 제37권4호
• /
• pp.317-324
• /
• 1993

The metabolic profile of carbinoxamine, 2-[(4-chlorophenyl)-2-pyridinyi-methoxy] N, N-dimethylethanamine, was determined in rat urine. Urinary extracts obtained with or without enzyme hydrolysis were derivatized with MSTFA/TMSCI (N-methyl-N-trimethylsilyl trifluoroacetamide/Trimethylchlorosilane) and analyzed by GC/MSD. In rat urine, which obtained after oral treatment with carbinoxamine maleate, chlorobenzolyl pyridine, (4-chlorophenyl)-2-pyridinyl methanol : carbinol, 2-[(4-chlorophenyl)-2-pyridinylmethoxy]-N-methylethanamine : norcarbinoxamine, 2-[(4-chlorophenyl)2-pyridinylmethoxy]ethanamine : bis-norcarbinoxamine and parent carbinoxamine were detected in free form. Norcarbinoxamine and bisnorcarbinoxamine were also detected in conjugated form(acetylation). These data suggest that in the rat, hydroxylation of either the benzyl or pyridinyl ring can occur during carbinoxamine elimination. O-demethylation and subsequent conjugation represents the primary pathway of carbinoxamine elimination in the rat.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.145-148
• /
• 2012

Spherical silica aerogel powders were fabricated via an emulsion polymerization method from a water glass. A water-in-oil emulsion, in which droplets of a silicic acid solution are emulsified with span 80 (surfactant) in n-hexane, was produced by a high power homogenizer. After gelation, the surface of the spherical silica hydrogels was modified using a TMCS (trimethylchlorosilane)/n-hexane solution followed by solvent exchange from water to n-hexane. Hydrophobic silica wet gel droplets were dried at 80 ℃ under ambient pressure. A perfect spherical silica aerogel powder between1 to 12 ㎛ in diameter was obtained and its size can be controlled by mixing speed. The tapping density, pore volume, and BET surface area of the silica aerogel powder were approximately 0.08 g·cm-3, 3.5 ㎤·g-1 and 742 ㎡·g-1, respectively.